mgeppert/Tasmota
1
0
Fork 0
Code Issues Pull Requests 1 Actions Packages Projects Releases Wiki Activity
21,096 Commits 3 Branches 119 Tags 270 MiB
development
Commit Graph

559 Commits

Author SHA1 Message Date
s-hadinger
0ad8696dfc
WebUI status line for MQTT and TLS, added 'FUNC_WEB_STATUS' event (#23326) 
* WebUI status line for MQTT and TLS, added 'FUNC_WEB_STATUS' event

* add Berry support
 2025-04-21 11:32:32 +02:00
Theo Arends
2bc5f682b0 Add command JsonPP 0..7 to enable (>0) JSON Pretty Print on user interfaces and set number of indents 2025-04-17 15:55:05 +02:00
Theo Arends
cea46bb660 Bump version v14.6.0.1 2025-04-16 14:02:56 +02:00
Theo Arends
117e503aaa Add PZEM_AC device address in JSON and GUI (#23268) 2025-04-14 15:24:02 +02:00
s-hadinger
7ddf8abf90
Ensure AlpineJS is in PROGMEM (#23264) 2025-04-07 19:49:19 +02:00
Theo Arends
215b37bf69 Add Alpine.js 2.8.2 support (#23259) 2025-04-07 14:42:35 +02:00
Theo Arends
2bf67b96a6 Prep XYZModem support on Serial/USB and telnet 2025-04-01 23:15:28 +02:00
Theo Arends
da4dc56b16 Bump version v14.5.0.3 2025-03-25 17:04:44 +01:00
Theo Arends
714ad233e0 Changed output of commands GPIO and GPIOs swapped 2025-03-25 16:53:26 +01:00
Theo Arends
f71ca3e0a2 Fix ESP32 telnet response 2025-03-23 17:34:44 +01:00
Theo Arends
caac9f1257 Reduce telnet stack usage fixing ESP8266 exceptions 2025-03-22 17:33:27 +01:00
Theo Arends
73cace5274 Add telnet graceful close 2025-03-21 16:38:26 +01:00
Theo Arends
fbb752d8c2 Add Telnet server using command Telnet <0|1|port>[,<IP filter>] 2025-03-20 23:11:30 +01:00
protectivedad
69c3863b14
HLK-LD2402 fix for missing '|' (#23142) 
Signed-off-by: Anthony Sepa <protectivedad@gmail.com>
Co-authored-by: Anthony Sepa <protectivedad@gmail.com>
 2025-03-12 15:26:02 +01:00
protectivedad
f3ae3bec4b
Added support for hlk-ld2402 tasmota_xsns_sensor (#23133) 
This is based on the xsns_102_ld2410s.ino.

* Available commands:
* LD2402_Status 0|1|2 - showing parameters|sensor readings|firmware info
* LD2402_ReRead - reread common, motion and micro threshold parameters from device
* LD2402_SetCommon 7-100,0-65535 - set common: maximum distance, disappearance delay
* LD2402_SetMotion n,n1..n16 - set motion threshold values (16)
* LD2402_SetMicro n,n1..n16 - set micro threshold values (16)
* LD2402_Mode 0/1 - set device output mode 0-normal, 1-engineering
* LD2402_AutoUpdate 3.0,2.0,3.0 - start autoupdate trigger,keep,micro magnification factor
* LD2402_Follow 0/n - reports every n seconds

Signed-off-by: Anthony Sepa <protectivedad@gmail.com>
Co-authored-by: Anthony Sepa <protectivedad@gmail.com>
 2025-03-11 17:03:54 +01:00
Theo Arends
007608914c Support Vango Technologies V924x ultralow power, single-phase, power measurement (#23127) 2025-03-11 14:57:11 +01:00
Ivan Chopa
758ba17dde
Added V9240 energy metering chip driver (#23127) 
* Add V9240 driver

* Addendum to previous commit

* Add driver code similar to the prototype

* they are talking to each other

* Added implementation of calibration commands

* continued work of calibration

* Maybe it works.

* Post-merger control

* Change driver number 34 to 25

* Correction of other comments

* Removed  duplicate code

* Adjusting the calibration procedure according to the behavior stated here. To the extent possible.
https://tasmota.github.io/docs/Power-Monitoring-Calibration/#calibration-procedure

* Removed added trailing whitespaces

* Fixing several small issues.
 2025-03-11 14:28:07 +01:00
s-hadinger
f305113d6d
Removed USE_WEBCLIENT and default USE_WEBCLIENT_HTTPS (#23132) 2025-03-10 22:37:27 +01:00
Jason2866
a0c8ac4f80
enable FTP for all esp8266 >= 4MB (not only for 4MB variant) (#23120) 2025-03-08 13:07:58 +01:00
Theo Arends
549ca6e32f ESP32 enable webcam version 2 (#18732) 2025-03-04 10:16:13 +01:00
Theo Arends
72520e0743 Bump version v14.5.0.2 2025-03-02 16:17:07 +01:00
Theo Arends
b4c1cd654f Bump version v14.5.0.1 2025-02-18 16:14:27 +01:00
s-hadinger
9b258cadcf
Wrong RMT channels for ESP32S3, now depends on 'soc_caps.h' (#23021) 2025-02-17 22:24:50 +01:00
Jason2866
a9150dc703
revert accidentally change of rgb order 2025-02-12 18:36:26 +01:00
Theo Arends
c076331fad Add support for Wiz Smart Remote using #define USE_WIZMOTE and command SetOption164 1 2025-02-12 17:45:06 +01:00
s-hadinger
bc7a1f5dbc
'MqttTLS' field in 'Status 6' to indicate if the MQTT connection is encrypted (#22995) 2025-02-12 14:56:47 +01:00
Theo Arends
c9cd6aae1d Bump version v14.4.1.4 
- Formatter `%_U` for `ext_snprintf_P()` to print uint64_t variable as decimal equivalent to `%llu`
- Support for RC-switch decoding of 64-bit received data
 2025-02-04 15:07:03 +01:00
Jeroen Vermeulen
34b173e953
Added C8-CO2-5K CO2 Sensor (#22905) 
* Added the C8-CO2-5K CO2 sensor.

* Small improvements

* Renamed one var with incorrect name.
 2025-01-31 09:34:55 +01:00
Theo Arends
53dee5b002 Add GPS driver select baudrate using GPIO GPS_RX1 (9600bps), GPS_RX2 (19200bps) or GPS_RX3 (38400bps) (#22869) 2025-01-25 14:15:11 +01:00
s-hadinger
beb967ccd4
Command 'PixelType' to change the WS2812 color order and channel number (#22876) 2025-01-24 21:21:35 +01:00
Theo Arends
e5e4c336b5 Add failsafe to FileLog 2025-01-13 16:19:59 +01:00
Theo Arends
83b09f4de1 Bump version v14.4.1.3 
- Update changelogs
 2025-01-10 12:29:51 +01:00
Theo Arends
3365fd0d0b Add file logging 2025-01-10 12:15:24 +01:00
Theo Arends
fe2f4d031f Add timeout handling for RG15 (#22768) 2025-01-06 16:14:47 +01:00
Christian Baars
17ab5a5e83
fix missing button when turning on BLE (#22770) 2025-01-05 19:14:59 +01:00
s-hadinger
bd7e47139c
Berry add light_pixels values to 'tasmota.settings' (#22762) 
* Berry add light_pixels values to 'tasmota.settings'

* fix compilation
 2025-01-04 12:24:38 +01:00
s-hadinger
50f0f8a651
Expand 'Pixels' with reverse, height and alternate (#22755) 2025-01-03 08:24:49 +01:00
Theo Arends
aafe528682 Enable ESP32 TWAI in default binary 2025-01-02 12:44:49 +01:00
Mark Ruys
a2752bf500
Support S88 sensor (#22733) 
* Support S88 sensor

Also:
- More stable model detection
- More robust against errors
- Better logging

* Support S88
 2025-01-01 14:26:29 +01:00
Theo Arends
1a482364bc Add support for ESP32 Two-Wire Automotive Interface (TWAI) or Controller Area Network (CAN) busses 
- Bump version V14.4.1.2
 2025-01-01 14:14:23 +01:00
Theo Arends
94f3744235 Prep TWAI support 2024-12-24 12:06:50 +01:00
Theo Arends
2c3785c1c6 Add comments and some default defines 2024-12-16 14:57:16 +01:00
Theo Arends
ef7b2404d4 Add command `SetOption163 1` to disable display of Device name in GUI header 2024-12-15 16:21:17 +01:00
Theo Arends
af3bb96a2a Bump version v14.4.1.1 2024-12-15 15:14:37 +01:00
Theo Arends
5294b99ba7 Fix MCP23xxx, PCF8574 and Shift595 power control when a display is configured regression from v14.3.0.7 2024-12-14 14:31:16 +01:00
Theo Arends
ee3fbdf4e0 Bump version v14.4.0.1 2024-12-11 11:10:37 +01:00
gemu
9317e02f25
recode powerwall (#22589) 2024-12-05 15:42:20 +01:00
Theo Arends
f72769252e Fix KNX Scenes index change regression from v14.2.0.4 (#22405) 2024-12-04 10:52:00 +01:00
Theo Arends
570e2052d3 Fix compilation 2024-12-03 11:37:39 +01:00
Theo Arends
a838ec09f8 Minor changes 2024-11-30 13:51:47 +01:00
Theo Arends
6d0467489a Add command SetOption161 1 to disable display of state text (#22515) 2024-11-21 12:13:14 +01:00
Theo Arends
3778f22d7b Fix wrong GUI Module and Template drop down list indexes regression 2024-11-18 22:53:07 +01:00
Theo Arends
4e40bbf3b6 Bump version v14.3.0.7 - again 
- ESP32 max number of supported switches/buttons/relays from 28 to 32
- ESP32 max number of interlocks from 14 to 16
 2024-11-17 14:03:04 +01:00
Theo Arends
6821293819 Revert "Bump version v14.3.0.7" 
This reverts commit 14c0a42203.
 2024-11-17 11:30:55 +01:00
Theo Arends
14c0a42203 Bump version v14.3.0.7 
- ESP32 max number of supported switches/buttons/relays from 28 to 32
- ESP32 max number of interlocks from 14 to 16
 2024-11-16 17:47:18 +01:00
Theo Arends
996ea17fb6 prep support TM1640 2024-11-15 16:12:17 +01:00
Jason2866
50b6f74295
Better check for existing Ethernet support in Arduino libs (#22473) 
* use IDF var for eth check
 2024-11-12 21:49:36 +01:00
Theo Arends
cf94ccf59c Bump version v14.3.0.6 
- Add command ``WebColor20`` to control color of Button when Off
 2024-11-11 22:44:18 +01:00
Jason2866
b903c6a843
enable Ethernet in all safeboot firmware (except c2) (#21983) 
* enable Ethernet in all safeboot firmware (except c2)

* undef SPI for C2 in variant minimal
 2024-11-11 18:18:19 +01:00
Theo Arends
331fd14268 Add Settings->ms5837_pressure_offset (#22466) 2024-11-11 17:32:50 +01:00
Theo Arends
c86f74d456 Bump version v14.3.0.5 
- Redesign GUI adding feedback to buttons, shutters and lights
 2024-11-11 13:34:09 +01:00
Theo Arends
3bc90175db Fix ESP32, ESP32-S2 and ESP32-S3 re-enable touch buttons (#22446) 2024-11-09 15:24:40 +01:00
Theo Arends
df293dad82 Add support MS5837 2024-11-08 18:16:26 +01:00
vtHydroponics
a35bb5a5c9
MS5837 functionality with BMP280 optional dependency (#22376) 
* Finalized gain/integration adjustment trees

* Fixed the bugs

* works but polishing code

* need to debug pressure in bmp

* updated temp to change via setoption8 command from tasmota

* sensor table working, value reporting working, need to update dependency on sensor duality

* working

* updated file name for ms5837 xsns file

* final working with renamed for current updates (128->116)

* resolved PR comments for extra spaces, xi2c_96

* removed extra spaces, added unit for inches across languages

* added "Water depth" for languages

* removed inches as a unit from language files

* switched to centimeter units for SI consistency in Tasmota

* all variables showing in console and table; need to adjust offsets

* cm conversion properly reporting

* Sensor116 in console calibrates the sensor's pressure_offset variable

* removed pressure offset debugging lines

* removed unecessary commented items from old code
 2024-11-08 17:45:37 +01:00
Theo Arends
49d706f54c Add DALI command DaliGroupSliders 0..16 to show GUI group sliders with feedback disabling DaliLight 2024-10-31 17:01:36 +01:00
s-hadinger
5892fef63d
I2C over Serial, preliminary stub (#22388) 
* I2C over Serial, preliminary stub

* Imporve initializer
 2024-10-31 09:18:37 +01:00
Theo Arends
3f4b2331ee Bump version v14.3.0.3 
- Change ESP32 Platform from 2024.10.30 to 2024.11.30, Framework (Arduino Core) from v3.1.0.241023 to v3.1.0.241030 and IDF to 5.3.1.241024 (#22384)
- Fix ESP32 Arduino Core IPv6 zones used by Matter (#22378)
 2024-10-30 15:30:31 +01:00
Theo Arends
2925836a9c Add command `SetOption161 1` to disable web page slider updates by commands 
A long standing wish is fullfilled; GUI sliders can now be updated by commands and background runs.
 2024-10-29 17:09:39 +01:00
Theo Arends
227e5f24b6 Enable DALI in ESP32 Tasmota 2024-10-27 11:00:17 +01:00
Theo Arends
0f2b3b1898 Update changelogs 2024-10-25 17:27:39 +02:00
md5sum-as
41442a54ce
add xsns_102_ld2410s.ino (#22253) 
Co-authored-by: Theo Arends <11044339+arendst@users.noreply.github.com>
 2024-10-25 17:09:05 +02:00
md5sum-as
33e1da84e7
Xsns 102 ld2410 (#21880) 
* xsns_102_ld2410.ino add commands

* fix

* Add attension about supported devices

* Fix lang files
 2024-10-25 16:45:26 +02:00
Theo Arends
73cd5cee25 Add support for US AQI and EPA AQI in PMS5003x sensors (#22294) 2024-10-25 14:44:42 +02:00
Theo Arends
886221a1d6 Add experimental support for Shelly DALI Dimmer Gen3 (See template in file xdrv_75_dali.ino) 2024-10-24 23:03:14 +02:00
Theo Arends
2b6acff4f4 Bump version to v14.3.0.2 
- DALI command `DaliGear` to set max found gear to speed up scan response
- DALI command `DaliGroup` to add gear to groups
- DALI command `DaliTarget` to set light control broadcast, group number or gear number
- DALI renamed commands `DaliCommission` to `DaliScan` and `DaliWeb` to `DaliLight`
- DALI set Tasmota light control as default
 2024-10-22 12:38:56 +02:00
Jason2866
923ed91c9c
optimize env tasmota32-zbbrdgpro (#22323) 
* remove IR Remote from zigbee bridgg
* remove shutters support
* add lib ignores to zigbee bridge env
* remove ENERGY_SENSOR from zigbee bridge 32 env
 2024-10-19 14:06:42 +02:00
Jason2866
9c24258530
disable ir (#22321) 2024-10-19 13:09:35 +02:00
Christian Baars
e39f1cc83f
track BLE devices with RPA (#22300) 2024-10-16 18:14:00 +02:00
Theo Arends
69f7f155dd Bump version v14.3.0.1 2024-10-15 11:03:45 +02:00
Theo Arends
4b06cb27b0 Adhere to DALI naming 2024-10-11 17:27:12 +02:00
Theo Arends
8ea4c7887f Move I2C2 test up front 2024-10-11 12:25:34 +02:00
Theo Arends
04f3df8bf6 Add command `DaliWeb 1` to enable light control for broadcast address 
- Change DaliDimmer range from 0..254 to 0..100
 2024-10-10 17:49:11 +02:00
Theo Arends
0240da2bf7 Fix Dali received data decoding 
- Add support for DALI 1 on ESP8266
 2024-10-06 21:57:59 +02:00
Theo Arends
692a0ca4b1 Bump version 14.2.0.6 2024-09-26 17:38:49 +02:00
Theo Arends
08d75a5fe3 Add Support for BL0906 up to 6 channel energy monitor as used in Athom EM2/EM6 (#22167) 2024-09-25 18:11:07 +02:00
Theo Arends
27a4ea0f70 Add Support for BL0906 up to 6 channel energy monitor as used in Athom EM2/EM6 (#22167) 2024-09-25 18:05:16 +02:00
Theo Arends
64de5497f4 Bump version v14.2.0.5 
- Add ESP8266 support for I2C CLK on GPIO16 (#22199)
 2024-09-24 17:44:15 +02:00
Theo Arends
8d7a27df76 Fix ESP8266 Exception 3 on tasmota-minimal caused by unaligned PROGMEM (#22169) 2024-09-20 18:20:09 +02:00
Theo Arends
bf4d0d0890 Revert "Fix ESP8266 Exception 3 on tasmota-minimal caused by unaligned PROGMEM (#22169)" 
This reverts commit b00d7fd0ac.
 2024-09-20 18:14:53 +02:00
Theo Arends
b00d7fd0ac Fix ESP8266 Exception 3 on tasmota-minimal caused by unaligned PROGMEM (#22169) 2024-09-20 18:13:38 +02:00
Theo Arends
83eb8aeaa7 Update changelogs 2024-09-20 12:01:15 +02:00
Theo Arends
9238ee73d6 Add ESP8266 experimental support for second I2C bus 2024-09-19 14:47:18 +02:00
Theo Arends
a5730a76f9 Add command entered to command error and command unknown message 2024-09-17 16:24:45 +02:00
s-hadinger
6e4517de02
Berry virtual Energy driver (#22134) 2024-09-12 19:38:04 +02:00
pbrinette
28bbf11dbb
Enhance the KNX capabilities of Tasmota to offer more flexibility and features (#22071) 2024-09-09 09:25:11 +02:00
Theo Arends
1bf6a13d7c Bump version v14.2.0.4 
- Add HX711 optional calibration precision option on command ``Sensor34 2 <weight in gram> <precision>`` where `<precision>` is 1 to 10 (#13983)
 2024-09-08 17:32:35 +02:00
Theo Arends
831597e7d9 Version v14.2.0.3 
- Add command ``SetOption69 1`` to enable Serial Bridge inverted Receive (#22000)
 2024-08-23 11:22:26 +02:00
Theo Arends
798edc20c2 Version v14.2.0.2 
- Changed Energy BL09xx command ``CurrentSet`` input changed from Ampere to milliAmpere
 2024-08-21 16:27:43 +02:00
Theo Arends
30cffa1acc Bump version v14.2.0.1 2024-08-14 15:13:00 +02:00
Theo Arends
102428f768 Needed too 2024-08-13 15:13:04 +02:00