Commit Graph

66 Commits

Author SHA1 Message Date
Theo Arends
be72bde8f5 Add ESP32 support for internal Hall Effect sensor
Add ESP32 support for internal Hall Effect sensor connected to both GPIO36 and GPIO39 only
2021-03-27 15:15:15 +01:00
Jason2866
8bc48d37b2
No Discovery 2021-03-21 14:33:12 +01:00
Jan Bubík
c6673d4081 new feature: LCD/DLP Projector Serial Control
- implemented as XDRV53
 - user must configure GPIO pins "DLP Rx" and "DLP Tx" for serial communication
 - emulates an additional RELAY by sending ON/OFF commands to Projector
 - continually polls the Projector's state to update virtual RELAY state
 - blocks RELAY1 in ON state while Projector is running (to protect the lamp)
 - serial codes for NEC and OPTOMA, ready for more manufacturers
 - tested with NEC V300W
2021-02-27 22:28:29 +01:00
Theo Arends
14206e46a1 Add support for TM1637 seven segment display by Ajith Vasudevan (#10889) 2021-02-17 12:32:36 +01:00
Norbert Richter
435be84ff3
Add SDM72 Modbus energy meter 2021-02-09 16:13:40 +01:00
Theo Arends
c934a20b4f Add support for TOF10120
Add support for TOF10120 time of flight sensor by Cyril Pawelko (#10190)
2021-01-22 16:48:41 +01:00
Norbert Richter
8387c14dfc
Add NeoPool feature 2021-01-20 15:06:59 +01:00
Theo Arends
7c4770e69c Update BUILDS.md 2021-01-11 14:14:22 +01:00
Theo Arends
f6d7c5c578 Update changelog 2021-01-11 14:13:20 +01:00
Theo Arends
54c1a2d029 Add support for SPI display driver for ST7789 TFT
Add support for SPI display driver for ST7789 TFT by Gerhard Mutz (#9037)
2021-01-01 15:05:58 +01:00
Barbudor
f1c675e7a1 Also referencing USE_IBEACON_ESP32 2020-12-29 12:08:33 +01:00
Barbudor
46db2f2c99 BUILDs should refer MI_ESP32 in tasmota32 and tasmota32-sensors 2020-12-29 12:06:14 +01:00
Theo Arends
931929c952 Add support for MFRC522
Add support for SPI connected MFRC522 13.56MHz rfid card reader (#9916)
2020-12-06 16:32:07 +01:00
Theo Arends
6fed564ee5
Update BUILDS.md 2020-11-22 14:43:14 +01:00
Julio Gonzalez Gil
2eb70531e4 Document state of USE_PING at BUILDS.md 2020-11-22 14:38:42 +01:00
Theo Arends
c02770ce96 Add support for Shelly Dimmer 1 and 2
Add support for Shelly Dimmer 1 and 2 by James Turton (#9854)
2020-11-14 16:43:32 +01:00
Theo Arends
4b6465fd10 Add support for fingerprint sensor
Add support for AS608 optical and R503 capacitive fingerprint sensor
2020-11-11 17:31:48 +01:00
Theo Arends
e498b28864 Add support for EZO PMP sensors
Add support for EZO PMP sensors by Christopher Tremblay (#9760)
2020-11-07 11:35:33 +01:00
Theo Arends
54f9532919 Add command `SetOption114 1`
Add command ``SetOption114 1`` to detach Swiches from Relays and enable MQTT action state for all the SwitchModes
2020-11-03 14:34:02 +01:00
Theo Arends
67bd5daf45 Update changelog 2020-11-02 11:58:23 +01:00
Theo Arends
db863c4589 Add support for EZO FLO
Add support for EZO FLO sensors by Christopher Tremblay (#9697)
2020-11-01 15:15:10 +01:00
Theo Arends
6f7a20e2ec Add support for EZO PRS sensors
Add support for EZO PRS sensors by Christopher Tremblay (#9659)
2020-10-29 11:53:25 +01:00
Theo Arends
85d2626e84 Refactor feature list build 2020-10-28 11:37:59 +01:00
Theo Arends
a96218fc1c v9.0.0.3
- Add TLS in binary tasmota-zbbridge (#9620)
- Add support for EZO CO2 sensors by Christopher Tremblay (#9619)
2020-10-25 14:46:13 +01:00
Theo Arends
582c32f5b9 Add support for EZO EC sensor
Add support for EZO EC sensors by Christopher Tremblay (#9613)
2020-10-24 12:41:08 +02:00
Theo Arends
1021cf3ca5 Update changelog and releasenotes 2020-10-23 16:56:03 +02:00
Theo Arends
500fb147c4 Add Breaking Changed to Release Notes
- Support for EZO RTD sensors by Christopher Tremblay (#9585)
- On ZigbeeBridge support for glowing led when permit join is active (#9581)
- Support for PWM Dimmer multi-press and ledmask (#9584)
2020-10-20 14:04:29 +02:00
Theo Arends
38e2638f07 Add support for EZO Ph and ORP sensors
Add support for EZO Ph and ORP sensors by Christopher Tremblay (#9567)
2020-10-18 15:36:17 +02:00
Christopher Tremblay
d8b8636a44 EZOpH & EZOORP support
This commits adds support for EZOpH and EZOORP to Tasmota
2020-10-18 05:10:12 -07:00
Theo Arends
330109d67c Add optional support for Orno WE517
Add optional support for Orno WE517-Modbus energy meter by Maxime Vincent (#9353)
2020-10-02 16:37:43 +02:00
Theo Arends
760d702fd0 Add optional support for Mitsubishi Electric HVAC
Add optional support for Mitsubishi Electric HVAC by David Gwynne (#9237)
2020-10-02 15:10:21 +02:00
Theo Arends
201bad3eb0 Prep release 8.5 2020-09-06 18:41:39 +02:00
Morris Jobke
2ba87c9667
Add USE_PROMETHEUS flag to build list 2020-09-01 12:34:01 +02:00
Theo Arends
25a187499b Prep release 8.4.0 2020-07-29 10:44:09 +02:00
Theo Arends
0cc1dd957b Add SO98 to control user rotary support 2020-07-02 18:13:14 +02:00
Jason2866
9ecef62e8b
Update BUILDS.md 2020-06-25 15:43:17 +02:00
Theo Arends
934526244f Add support for single wire LMT01
Add support for single wire LMT01 temperature Sensor by justifiably (#8713)
2020-06-17 17:22:41 +02:00
Theo Arends
1181a701ce Update BUILDS.md 2020-06-17 15:03:09 +02:00
Charles
6cbae1fafe Added French Metering Teleinfo 2020-06-12 21:53:12 +02:00
device111
05a2c3c164 correction of BUILS.md and mcp9808 Domoticz index 2020-06-02 11:34:25 +02:00
device111
8c29ead09d Add support for up to eight MCP9808 temperature sensors 2020-06-02 08:35:49 +02:00
Theo Arends
79083a9882 Update BUILDS.md 2020-05-16 11:30:16 +02:00
Theo Arends
b37092adb8 Update BUILDS.md 2020-05-13 14:49:13 +02:00
Theo Arends
05c7661e04 Update BUILDS.md 2020-05-13 14:47:31 +02:00
Theo Arends
2fbad7b389 Change webcam driver number
Change webcam driver number as ESP32 driver only starting now from 81.
2020-05-07 16:53:56 +02:00
Theo Arends
d78ca09c30 Integrate OpenTherm and WindMeter 2020-05-07 16:03:27 +02:00
Theo Arends
50614a18b5 Rename language files to fix compilation error 2020-05-05 17:09:48 +02:00
Theo Arends
ba01cb2046 Fix GlobalTemp and GlobalHum
Fix GlobalTemp and GlobalHum (#8156)
2020-04-14 11:58:24 +02:00
Federico Leoni
bb73f6c412
Update BUILDS.md 2020-03-22 14:06:30 -03:00
Jason2866
ee079b36ef
ADS1115_I2C deleted
since there is no corresponding driver
2020-03-20 21:23:25 +01:00