Theo Arends
fd3ff98074
Bump version v15.0.1.3
2025-08-03 14:45:54 +02:00
Theo Arends
2e9ba984f5
Prep for user config Hosted MCU connections
2025-07-27 14:25:42 +02:00
Theo Arends
6e7e483a70
Fix repeated get hosted MCU fw version
2025-07-16 14:27:01 +02:00
Jason2866
a6124128a7
P4 Ethernet support in safeboot ( #23681 )
2025-07-14 20:46:43 +02:00
Christian Baars
6c699e9b95
add hostedOTA and info messages ( #23675 )
2025-07-12 11:43:42 +02:00
Jason2866
9e25fc0f30
basic P4 support ( #23663 )
2025-07-10 16:47:30 +02:00
Theo Arends
c909e20fb1
Prep Settings for ESP32-P4
2025-07-10 14:56:39 +02:00
chefpro
a052ee00a2
Add more commands and error handling to pipsolar driver. ( #23659 )
...
Co-authored-by: Peter Rustler <peter@rustlerit.de>
2025-07-09 22:41:53 +02:00
Theo Arends
56eb8d98c0
Bump version 15.0.1.2
2025-07-08 15:16:37 +02:00
Christian Baars
fb44d42426
BLE updates for esp-nimble-cpp v2.x ( #23553 )
2025-06-15 18:24:54 +02:00
Theo Arends
9392ac7d55
Bump version v15.0.1.1
2025-06-14 14:31:34 +02:00
Theo Arends
79024cdd23
Bump version v15.0.0.1
2025-06-13 15:01:51 +02:00
Theo Arends
6853e88116
Update i18n.h
2025-05-23 16:38:25 +02:00
Theo Arends
3d11cc4fee
Add command LoRaWanDecoder ( #23394 )
2025-05-10 14:44:18 +02:00
Theo Arends
42a1aee832
Bump version v14.6.0.2
2025-05-10 13:28:32 +02:00
Christian Baars
75b109c893
use smaller poly1305-donna and remove other poly1305_auth code ( #23386 )
2025-05-06 22:01:22 +02:00
Theo Arends
5d8b90d83b
Add Region to i18
2025-05-06 16:20:35 +02:00
s-hadinger
6cd19c0e59
WebUI status line left and renamed events 'FUNC_WEB_STATUS_left' and 'FUNC_WEB_STATUS_RIGHT' ( #23354 )
2025-04-29 14:04:29 +02:00
Christian Baars
723684bb06
Berry: add crypto modules ED25519 and Chacha20-Poly1305 ( #23338 )
...
* add crypto modules for Berry
* remove Berry examples from PR
2025-04-25 00:11:47 +02:00
s-hadinger
0ad8696dfc
WebUI status line for MQTT and TLS, added 'FUNC_WEB_STATUS' event ( #23326 )
...
* WebUI status line for MQTT and TLS, added 'FUNC_WEB_STATUS' event
* add Berry support
2025-04-21 11:32:32 +02:00
Theo Arends
2bc5f682b0
Add command JsonPP 0..7 to enable (>0) JSON Pretty Print on user interfaces and set number of indents
2025-04-17 15:55:05 +02:00
Theo Arends
cea46bb660
Bump version v14.6.0.1
2025-04-16 14:02:56 +02:00
Theo Arends
117e503aaa
Add PZEM_AC device address in JSON and GUI ( #23268 )
2025-04-14 15:24:02 +02:00
s-hadinger
7ddf8abf90
Ensure AlpineJS is in PROGMEM ( #23264 )
2025-04-07 19:49:19 +02:00
Theo Arends
215b37bf69
Add Alpine.js 2.8.2 support ( #23259 )
2025-04-07 14:42:35 +02:00
Theo Arends
2bf67b96a6
Prep XYZModem support on Serial/USB and telnet
2025-04-01 23:15:28 +02:00
Theo Arends
da4dc56b16
Bump version v14.5.0.3
2025-03-25 17:04:44 +01:00
Theo Arends
714ad233e0
Changed output of commands GPIO and GPIOs swapped
2025-03-25 16:53:26 +01:00
Theo Arends
f71ca3e0a2
Fix ESP32 telnet response
2025-03-23 17:34:44 +01:00
Theo Arends
caac9f1257
Reduce telnet stack usage fixing ESP8266 exceptions
2025-03-22 17:33:27 +01:00
Theo Arends
73cace5274
Add telnet graceful close
2025-03-21 16:38:26 +01:00
Theo Arends
fbb752d8c2
Add Telnet server using command Telnet <0|1|port>[,<IP filter>]
2025-03-20 23:11:30 +01:00
protectivedad
69c3863b14
HLK-LD2402 fix for missing '|' ( #23142 )
...
Signed-off-by: Anthony Sepa <protectivedad@gmail.com>
Co-authored-by: Anthony Sepa <protectivedad@gmail.com>
2025-03-12 15:26:02 +01:00
protectivedad
f3ae3bec4b
Added support for hlk-ld2402 tasmota_xsns_sensor ( #23133 )
...
This is based on the xsns_102_ld2410s.ino.
* Available commands:
* LD2402_Status 0|1|2 - showing parameters|sensor readings|firmware info
* LD2402_ReRead - reread common, motion and micro threshold parameters from device
* LD2402_SetCommon 7-100,0-65535 - set common: maximum distance, disappearance delay
* LD2402_SetMotion n,n1..n16 - set motion threshold values (16)
* LD2402_SetMicro n,n1..n16 - set micro threshold values (16)
* LD2402_Mode 0/1 - set device output mode 0-normal, 1-engineering
* LD2402_AutoUpdate 3.0,2.0,3.0 - start autoupdate trigger,keep,micro magnification factor
* LD2402_Follow 0/n - reports every n seconds
Signed-off-by: Anthony Sepa <protectivedad@gmail.com>
Co-authored-by: Anthony Sepa <protectivedad@gmail.com>
2025-03-11 17:03:54 +01:00
Theo Arends
007608914c
Support Vango Technologies V924x ultralow power, single-phase, power measurement ( #23127 )
2025-03-11 14:57:11 +01:00
Ivan Chopa
758ba17dde
Added V9240 energy metering chip driver ( #23127 )
...
* Add V9240 driver
* Addendum to previous commit
* Add driver code similar to the prototype
* they are talking to each other
* Added implementation of calibration commands
* continued work of calibration
* Maybe it works.
* Post-merger control
* Change driver number 34 to 25
* Correction of other comments
* Removed duplicate code
* Adjusting the calibration procedure according to the behavior stated here. To the extent possible.
https://tasmota.github.io/docs/Power-Monitoring-Calibration/#calibration-procedure
* Removed added trailing whitespaces
* Fixing several small issues.
2025-03-11 14:28:07 +01:00
s-hadinger
f305113d6d
Removed USE_WEBCLIENT and default USE_WEBCLIENT_HTTPS ( #23132 )
2025-03-10 22:37:27 +01:00
Jason2866
a0c8ac4f80
enable FTP for all esp8266 >= 4MB (not only for 4MB variant) ( #23120 )
2025-03-08 13:07:58 +01:00
Theo Arends
549ca6e32f
ESP32 enable webcam version 2 ( #18732 )
2025-03-04 10:16:13 +01:00
Theo Arends
72520e0743
Bump version v14.5.0.2
2025-03-02 16:17:07 +01:00
Theo Arends
b4c1cd654f
Bump version v14.5.0.1
2025-02-18 16:14:27 +01:00
s-hadinger
9b258cadcf
Wrong RMT channels for ESP32S3, now depends on 'soc_caps.h' ( #23021 )
2025-02-17 22:24:50 +01:00
Jason2866
a9150dc703
revert accidentally change of rgb order
2025-02-12 18:36:26 +01:00
Theo Arends
c076331fad
Add support for Wiz Smart Remote using #define USE_WIZMOTE and command SetOption164 1
2025-02-12 17:45:06 +01:00
s-hadinger
bc7a1f5dbc
'MqttTLS' field in 'Status 6' to indicate if the MQTT connection is encrypted ( #22995 )
2025-02-12 14:56:47 +01:00
Theo Arends
c9cd6aae1d
Bump version v14.4.1.4
...
- Formatter `%_U` for `ext_snprintf_P()` to print uint64_t variable as decimal equivalent to `%llu`
- Support for RC-switch decoding of 64-bit received data
2025-02-04 15:07:03 +01:00
Jeroen Vermeulen
34b173e953
Added C8-CO2-5K CO2 Sensor ( #22905 )
...
* Added the C8-CO2-5K CO2 sensor.
* Small improvements
* Renamed one var with incorrect name.
2025-01-31 09:34:55 +01:00
Theo Arends
53dee5b002
Add GPS driver select baudrate using GPIO GPS_RX1 (9600bps), GPS_RX2 (19200bps) or GPS_RX3 (38400bps) ( #22869 )
2025-01-25 14:15:11 +01:00
s-hadinger
beb967ccd4
Command 'PixelType' to change the WS2812 color order and channel number ( #22876 )
2025-01-24 21:21:35 +01:00
Theo Arends
e5e4c336b5
Add failsafe to FileLog
2025-01-13 16:19:59 +01:00
