mgeppert/Tasmota
1
0
Fork 0
Code Issues Pull Requests 1 Actions Packages Projects Releases Wiki Activity
4,452 Commits 3 Branches 119 Tags 270 MiB
5527f424a0
Commit Graph

3063 Commits

Author SHA1 Message Date
Theo Arends
5527f424a0 Add deep sleep support 
Add define USE_DEEPSLEEP and command DeepSleepTime 0 or 10..86400 (seconds) to enter deepsleep mode (#6638)
 2019-10-14 16:12:59 +02:00
Theo Arends
ccf13080e2
Merge pull request #6637 from gemu2015/sendmail-update 
sendmail with bearsssl-light
 2019-10-14 14:01:07 +02:00
Theo Arends
548072daa6 Fix compile errors relatd to LWIP_IPV6 
Fix compile errors relatd to LWIP_IPV6
 2019-10-14 12:34:01 +02:00
gemu2015
32dc4b8f5f sendmail with bearsssl-light 2019-10-14 10:14:17 +02:00
Stephan Hadinger
5f08aef5f7 Fix Rules were not triggered with IR unknown protocol or in sonoff-it (#6629) 2019-10-13 22:16:13 +02:00
Theo Arends
a8582a4d0a
Merge pull request #6634 from altelch/development 
Allow IPv6 only setup. Still dualstack but works without configured …
 2019-10-13 19:40:55 +02:00
stefanbode
9859ee6083
Fix some errors... 
1. reset loop i=1 if address switches to range PCF8574_ADDR2 (PCF8574A were NOT detected)
2. correct logoutput to show correct number of boards found 
3. String array to short for PCF8574A. Overwrite the pfc8574.type with false. Hard to find bug.....
Tested with at least 2 PCF8574 boards.
 2019-10-13 17:54:06 +02:00
altelch
7f2efb56af Allow IPv6 only setup. Still dualstack but works without configured IPv4 address. WiFi.Status() returns WL_DISCONNECTED even when IPv6 global address is set. Minimal rework of setup code. 2019-10-13 14:15:32 +02:00
Stephan Hadinger
0092bf766c Add Zigbee additional commands and sending messages to control devices (#6095) 2019-10-13 12:56:52 +02:00
stefanbode
9602546f01
Fix overflow 2019-10-13 09:36:53 +02:00
Theo Arends
7b316f48f1 Change max rule compare string size from 23 to 79 
Change max rule compare string size from 23 to 79 (#6624)
 2019-10-12 16:42:11 +02:00
Heiko Krupp
a103972a21
Fix typo. 
Typo I stumbled over...
 2019-10-12 13:27:09 +02:00
Theo Arends
76758d3470 Add command Buzzer 0 to stop active buzzer cycle 
Add command Buzzer 0 to stop active buzzer cycle (#6615)
 2019-10-12 11:06:09 +02:00
Theo Arends
2b63c64f74 Houskeeping 2019-10-11 14:39:58 +02:00
Theo Arends
8803b55e5a
Merge pull request #6618 from altelch/development 
Initial IPv6 support for SLAAC (automatic address configuration).
 2019-10-11 13:41:01 +02:00
hkrupp
b48c1a1c82 Remove logging message translation and core 2.5.2 as future target is core 2.6 2019-10-11 12:50:45 +02:00
Theo Arends
86ffa2d5fe Fix JSON and functionality 
Fix JSON and functionality
 2019-10-11 11:23:53 +02:00
hkrupp
3596e4c77f Initial IPv6 support (SLAAC). Builds against 2.5.2 and 2.6.0 staging. iram1_0_seg problems with larger configurations. 2019-10-11 07:40:55 +02:00
Theo Arends
3cd6abe0bf
Merge pull request #6606 from shantur/tuya-2-byte-dimmer 
Add DimmerRange command and support longer dimmer ranges. Fixes #6605
 2019-10-10 22:57:58 +02:00
Theo Arends
acbae2edd9
Merge pull request #6612 from s-hadinger/fix_rgb 
Fix Avoid full power on 5 channels after a Reset
 2019-10-10 22:54:25 +02:00
Stephan Hadinger
111f533a5c Fix Avoid full power on 5 channels after a Reset 2019-10-10 21:44:31 +02:00
Federico Leoni
74081073ba
Update xdrv_12_home_assistant.ino 2019-10-10 15:00:26 -03:00
Shantur Rathore
01f6df9161 Add DimmerRange command and support longer dimmer ranges. Fixes #6605 
More and more serial dimmers are coming up with different dimming ranges, implemented DimmerRange command to make this setting generic and bring support for 2 byte dimming ranges which isn't supported by SetOptions.
 2019-10-10 15:53:01 +01:00
gemu2015
739f67f1e8 scripter update 2019-10-10 13:39:52 +02:00
Theo Arends
9add6f8d7d Add command Gpio 255 
Add command Gpio 255 to show physical GPIO configuration of all non-flash pins (#6407)
 2019-10-10 12:26:00 +02:00
Theo Arends
4b36a8dd73 Fix TuyaMcu dimmer count 
Fix TuyaMcu dimmer count (#6599)
 2019-10-10 11:03:57 +02:00
Theo Arends
0f72a93170 Add command SetOption34 0..255 to set backlog delay 
Add command SetOption34 0..255 to set backlog delay. Default value is 200 (mSeconds) (#6562)
 2019-10-09 17:52:52 +02:00
Theo Arends
18149f5c17 Bump version to 6.6.0.17 2019-10-09 17:38:43 +02:00
Theo Arends
cfe301474a
Merge pull request #6562 from ljakob/development 
process Backlog commands without minimum delay
 2019-10-09 17:17:19 +02:00
Theo Arends
10babaf061
Update sonoff.h 2019-10-09 17:16:52 +02:00
Theo Arends
11048137ef Fix TuyaMcu, Armtronix and Ps16dz 
Fix TuyaMcu, Armtronix and Ps16dz after Light redesign (#6599)
 2019-10-09 16:55:15 +02:00
stefanbode
20729e27e2
Update xdrv_27_shutter.ino 
Added Calibration matrix
 2019-10-09 06:36:11 +02:00
Theo Arends
fd2f204e81 Finish light driver redesign 
Finish light driver redesign
 2019-10-08 18:05:02 +02:00
Theo Arends
8d17301433 Redesign light driver phase 3 
Redesign light driver phase 3
 2019-10-08 17:46:03 +02:00
Theo Arends
6d31608fe0 Fix PZEM default address and detection 
* Change PZEM004T default address mask from 0.0.0.x to 192.168.1.x for legacy reason (#6585)
 * Fix PZEM004T, PZEMAC and PZEMDC autodetection (#6585)
 2019-10-08 13:18:10 +02:00
Theo Arends
afd3c64844 Bump version to 6.6.0.16 2019-10-08 13:14:25 +02:00
localhost61
426764ea8a Update French translation to v6.6.0.15 2019-10-08 12:01:20 +02:00
Stephan Hadinger
f6416aa2da Fix #6534 Power off not working 2019-10-07 20:30:00 +02:00
Theo Arends
48ec64cddb Fix My92x1 driver 
Fix My92x1 driver
 2019-10-07 11:56:20 +02:00
Theo Arends
b8100a056e Fix support for Lohas with multiple CW leds 
Fix support for Lohas with multiple CW leds (#6570)
 2019-10-07 11:51:08 +02:00
Theo Arends
a8d9da243f Fix default MqttLog and Shutter Accuracy 
Fix default MqttLog and Shutter Accuracy
 2019-10-07 10:34:40 +02:00
Adrian Scillato
284a4c1579
Updated Spanish Translation 2019-10-06 22:48:35 -03:00
Stephan Hadinger
58da51be1c Fix better handling of PWM White Temperature mode for Module 48 (#6534) 2019-10-06 20:34:35 +02:00
Theo Arends
4ff340d368 Redesign light driver phase 2 
Redesign light driver phase 2 (#6570)
 2019-10-06 18:05:17 +02:00
Theo Arends
019dc76740 Redesign light driver phase 1 
Redesign light driver phase 1
 2019-10-06 17:19:05 +02:00
Theo Arends
2bfa172324 Add I2C debug tools 
Add I2C debug tools
 2019-10-06 16:39:11 +02:00
Stephan Hadinger
cccd777967 Add Zigbee tracking of connected devices and auto-probing of Manuf/Model Ids 2019-10-06 12:40:58 +02:00
Theo Arends
dea8f03459 Add command SetOption72 
Add command SetOption72 0/1 to switch between software (0) or hardware (1) energy total counter (#6561)
 2019-10-06 11:43:01 +02:00
Theo Arends
ec9fa4f430
Merge pull request #6564 from pablozg/fixenergyreset 
Fix energyReset command issue #6561
 2019-10-06 11:32:40 +02:00
Theo Arends
853e090474 Fix Energy CurrentLow/High JSON message 
Fix Energy CurrentLow/High JSON message (#6573)
 2019-10-06 11:28:57 +02:00