- Fix cases where the subsequent Modbus packet
can be send to the serial port (triggered either by
'ModbusSend' command or request from TCP bridge)
before an answer was received to the previous packet.
This can happen in a setup where simultaneously:
- two (or more) modbus TCP clients are sending requests
through the modbus-proxy [1] to Tasmota,
- ModbusSend commands are executed (e.g. using Berry).
Log excerpt (from build with TASMOTAMODBUSDEBUG enabled):
14:51:18.940 MBS: Serial Send: 04 03 01 00 00 09 84 65
14:51:19.054 MBS: Serial Send: 04 03 10 0A 00 05 A1 5E
14:51:19.136 MBS: Serial Received: 04 03 0A 00 00 00 D0 00 00 01 AB 00 00 89 62
Fix adds 'waitingForAnswerFromSerial' flag which is set after
we send data to the serial port and prevents sending another
requests before we receive an answer or timeout happened.
Fix stores temporarily a 'ModbusSend' command data and tries
to execute it after Modbus response has been received or
timeout has happened.
- Add 'ModbusSerialTimeout' command which sets timeout in [ms]
for how long we will be waiting for an answer from the client device.
Default value is 1000 [ms] and it is not restored after reboot.
- Sends error 11 (0xB) (as TCP response) when no answer was received
from the serial port within the timeout set by 'ModbusSerialTimeout'
command.
- Add Modbus 'TransactionId' to the logging.
[1] https://github.com/tiagocoutinho/modbus-proxy
Signed-off-by: Damian Wrobel <dwrobel@ertelnet.rybnik.pl>
* add support for nexus protocol to RCSwitch library
Nexus protocol is used by temperature and humidity sensor that operate at 433 MHz.
It is used by various brands.
* calc separation limit for RCSwitch library automatically
MAX7219 and MAX7219_MATRIX are different displays and require different defines. DisplayModel19 incorrectly listed for MAX7219 instead of MAX7219_MATRIX.
* improved read access for SDM630
read access improved by reading several registers in one cycle -> higher update rate
* fixed compiler warning
* fix review finding
* added SDM630_HIGH_UPDATE_RATE to select new implementation
Adding SetOption references for a few `#define`, to make the relation clear, and in the common searchable format like `[SetOption147]`. Also added that since some time now, this option covers both `SSerialReceived` and `IrReceived`.
