mgeppert/Tasmota
1
0
Fork 0
Code Issues Pull Requests 1 Actions Packages Projects Releases Wiki Activity
20,350 Commits 3 Branches 119 Tags 270 MiB
a97d306a16
Commit Graph

496 Commits

Author SHA1 Message Date
protectivedad
69c3863b14
HLK-LD2402 fix for missing '|' (#23142) 
Signed-off-by: Anthony Sepa <protectivedad@gmail.com>
Co-authored-by: Anthony Sepa <protectivedad@gmail.com>
 2025-03-12 15:26:02 +01:00
protectivedad
f3ae3bec4b
Added support for hlk-ld2402 tasmota_xsns_sensor (#23133) 
This is based on the xsns_102_ld2410s.ino.

* Available commands:
* LD2402_Status 0|1|2 - showing parameters|sensor readings|firmware info
* LD2402_ReRead - reread common, motion and micro threshold parameters from device
* LD2402_SetCommon 7-100,0-65535 - set common: maximum distance, disappearance delay
* LD2402_SetMotion n,n1..n16 - set motion threshold values (16)
* LD2402_SetMicro n,n1..n16 - set micro threshold values (16)
* LD2402_Mode 0/1 - set device output mode 0-normal, 1-engineering
* LD2402_AutoUpdate 3.0,2.0,3.0 - start autoupdate trigger,keep,micro magnification factor
* LD2402_Follow 0/n - reports every n seconds

Signed-off-by: Anthony Sepa <protectivedad@gmail.com>
Co-authored-by: Anthony Sepa <protectivedad@gmail.com>
 2025-03-11 17:03:54 +01:00
Theo Arends
007608914c Support Vango Technologies V924x ultralow power, single-phase, power measurement (#23127) 2025-03-11 14:57:11 +01:00
Ivan Chopa
758ba17dde
Added V9240 energy metering chip driver (#23127) 
* Add V9240 driver

* Addendum to previous commit

* Add driver code similar to the prototype

* they are talking to each other

* Added implementation of calibration commands

* continued work of calibration

* Maybe it works.

* Post-merger control

* Change driver number 34 to 25

* Correction of other comments

* Removed  duplicate code

* Adjusting the calibration procedure according to the behavior stated here. To the extent possible.
https://tasmota.github.io/docs/Power-Monitoring-Calibration/#calibration-procedure

* Removed added trailing whitespaces

* Fixing several small issues.
 2025-03-11 14:28:07 +01:00
s-hadinger
f305113d6d
Removed USE_WEBCLIENT and default USE_WEBCLIENT_HTTPS (#23132) 2025-03-10 22:37:27 +01:00
Jason2866
a0c8ac4f80
enable FTP for all esp8266 >= 4MB (not only for 4MB variant) (#23120) 2025-03-08 13:07:58 +01:00
Theo Arends
549ca6e32f ESP32 enable webcam version 2 (#18732) 2025-03-04 10:16:13 +01:00
Theo Arends
72520e0743 Bump version v14.5.0.2 2025-03-02 16:17:07 +01:00
Theo Arends
b4c1cd654f Bump version v14.5.0.1 2025-02-18 16:14:27 +01:00
s-hadinger
9b258cadcf
Wrong RMT channels for ESP32S3, now depends on 'soc_caps.h' (#23021) 2025-02-17 22:24:50 +01:00
Jason2866
a9150dc703
revert accidentally change of rgb order 2025-02-12 18:36:26 +01:00
Theo Arends
c076331fad Add support for Wiz Smart Remote using #define USE_WIZMOTE and command SetOption164 1 2025-02-12 17:45:06 +01:00
s-hadinger
bc7a1f5dbc
'MqttTLS' field in 'Status 6' to indicate if the MQTT connection is encrypted (#22995) 2025-02-12 14:56:47 +01:00
Theo Arends
c9cd6aae1d Bump version v14.4.1.4 
- Formatter `%_U` for `ext_snprintf_P()` to print uint64_t variable as decimal equivalent to `%llu`
- Support for RC-switch decoding of 64-bit received data
 2025-02-04 15:07:03 +01:00
Jeroen Vermeulen
34b173e953
Added C8-CO2-5K CO2 Sensor (#22905) 
* Added the C8-CO2-5K CO2 sensor.

* Small improvements

* Renamed one var with incorrect name.
 2025-01-31 09:34:55 +01:00
Theo Arends
53dee5b002 Add GPS driver select baudrate using GPIO GPS_RX1 (9600bps), GPS_RX2 (19200bps) or GPS_RX3 (38400bps) (#22869) 2025-01-25 14:15:11 +01:00
s-hadinger
beb967ccd4
Command 'PixelType' to change the WS2812 color order and channel number (#22876) 2025-01-24 21:21:35 +01:00
Theo Arends
e5e4c336b5 Add failsafe to FileLog 2025-01-13 16:19:59 +01:00
Theo Arends
83b09f4de1 Bump version v14.4.1.3 
- Update changelogs
 2025-01-10 12:29:51 +01:00
Theo Arends
3365fd0d0b Add file logging 2025-01-10 12:15:24 +01:00
Theo Arends
fe2f4d031f Add timeout handling for RG15 (#22768) 2025-01-06 16:14:47 +01:00
Christian Baars
17ab5a5e83
fix missing button when turning on BLE (#22770) 2025-01-05 19:14:59 +01:00
s-hadinger
bd7e47139c
Berry add light_pixels values to 'tasmota.settings' (#22762) 
* Berry add light_pixels values to 'tasmota.settings'

* fix compilation
 2025-01-04 12:24:38 +01:00
s-hadinger
50f0f8a651
Expand 'Pixels' with reverse, height and alternate (#22755) 2025-01-03 08:24:49 +01:00
Theo Arends
aafe528682 Enable ESP32 TWAI in default binary 2025-01-02 12:44:49 +01:00
Mark Ruys
a2752bf500
Support S88 sensor (#22733) 
* Support S88 sensor

Also:
- More stable model detection
- More robust against errors
- Better logging

* Support S88
 2025-01-01 14:26:29 +01:00
Theo Arends
1a482364bc Add support for ESP32 Two-Wire Automotive Interface (TWAI) or Controller Area Network (CAN) busses 
- Bump version V14.4.1.2
 2025-01-01 14:14:23 +01:00
Theo Arends
94f3744235 Prep TWAI support 2024-12-24 12:06:50 +01:00
Theo Arends
2c3785c1c6 Add comments and some default defines 2024-12-16 14:57:16 +01:00
Theo Arends
ef7b2404d4 Add command `SetOption163 1` to disable display of Device name in GUI header 2024-12-15 16:21:17 +01:00
Theo Arends
af3bb96a2a Bump version v14.4.1.1 2024-12-15 15:14:37 +01:00
Theo Arends
5294b99ba7 Fix MCP23xxx, PCF8574 and Shift595 power control when a display is configured regression from v14.3.0.7 2024-12-14 14:31:16 +01:00
Theo Arends
ee3fbdf4e0 Bump version v14.4.0.1 2024-12-11 11:10:37 +01:00
gemu
9317e02f25
recode powerwall (#22589) 2024-12-05 15:42:20 +01:00
Theo Arends
f72769252e Fix KNX Scenes index change regression from v14.2.0.4 (#22405) 2024-12-04 10:52:00 +01:00
Theo Arends
570e2052d3 Fix compilation 2024-12-03 11:37:39 +01:00
Theo Arends
a838ec09f8 Minor changes 2024-11-30 13:51:47 +01:00
Theo Arends
6d0467489a Add command SetOption161 1 to disable display of state text (#22515) 2024-11-21 12:13:14 +01:00
Theo Arends
3778f22d7b Fix wrong GUI Module and Template drop down list indexes regression 2024-11-18 22:53:07 +01:00
Theo Arends
4e40bbf3b6 Bump version v14.3.0.7 - again 
- ESP32 max number of supported switches/buttons/relays from 28 to 32
- ESP32 max number of interlocks from 14 to 16
 2024-11-17 14:03:04 +01:00
Theo Arends
6821293819 Revert "Bump version v14.3.0.7" 
This reverts commit 14c0a42203.
 2024-11-17 11:30:55 +01:00
Theo Arends
14c0a42203 Bump version v14.3.0.7 
- ESP32 max number of supported switches/buttons/relays from 28 to 32
- ESP32 max number of interlocks from 14 to 16
 2024-11-16 17:47:18 +01:00
Theo Arends
996ea17fb6 prep support TM1640 2024-11-15 16:12:17 +01:00
Jason2866
50b6f74295
Better check for existing Ethernet support in Arduino libs (#22473) 
* use IDF var for eth check
 2024-11-12 21:49:36 +01:00
Theo Arends
cf94ccf59c Bump version v14.3.0.6 
- Add command ``WebColor20`` to control color of Button when Off
 2024-11-11 22:44:18 +01:00
Jason2866
b903c6a843
enable Ethernet in all safeboot firmware (except c2) (#21983) 
* enable Ethernet in all safeboot firmware (except c2)

* undef SPI for C2 in variant minimal
 2024-11-11 18:18:19 +01:00
Theo Arends
331fd14268 Add Settings->ms5837_pressure_offset (#22466) 2024-11-11 17:32:50 +01:00
Theo Arends
c86f74d456 Bump version v14.3.0.5 
- Redesign GUI adding feedback to buttons, shutters and lights
 2024-11-11 13:34:09 +01:00
Theo Arends
3bc90175db Fix ESP32, ESP32-S2 and ESP32-S3 re-enable touch buttons (#22446) 2024-11-09 15:24:40 +01:00
Theo Arends
df293dad82 Add support MS5837 2024-11-08 18:16:26 +01:00