new:
-removed NEAR/FAR because of the unreliability
-support for Rules, therefore change of the MQTT-Messages to a number format (clockwise: up,right,down,left then long and none)
Example:
rule1 on Tele-APDS9960#Gesture=1 do ... endon
-minor code changes to shorten things
changes:
-changed from interrupt mode to polling
-fixed the mqtt-messages
-fixed command "gesture" for the console. Now every argument except 0 and 1 will report the gesture mode
-changed gesture name from "overload" to "long"
First version with the "new" driver model.
The driver is disabled by default to prevent side effects und must be enabled for testing by hand.
Please uncomment:
// #define USE_APDS9960
Use GPIO_DSB as interrupt pin as provisional hack in the web interface of tasmota.
Please expect problems (reboot, ...). My personal usage scenario is:
Sonoff -> MQTT -> Node-Red -> MQTT -> Sonoff
Update xdrv_26_lm75ad.ino to support C or F depending on Settings.flag.temperature_conversion (#define TEMP_CONVERSION 0 or 1) as stored in [SetOption8] Return temperature in (0 = Celsius or 1 = Fahrenheit)
6.0.0a
* Add support for uploading Sonoff Bridge firmware found in
tools/fw_efm8bb1 folder build by Portisch using Web Gui File Upload
(#2886)
* Add command RfRaw to control Portisch firmware features
6.0.0a
* Add CRC to Settings making future upgrades more fail-safe
* Remove version 3, 4 and pre 5.2 settings auto-upgrade. See
https://github.com/arendst/Sonoff-Tasmota/wiki/Upgrade#migration-path
* Change default CFG_HOLDER from 0x20161209 to 4617 (=0x1209) - no
impact on default upgrades
* Added Console Commands to send KNX Commands
usage: KnxTx_Cmnd[slot] command
where [slot] is any of the 5 slots on the KNX Menu and command is 0 or 1
example: KnxTx_Cmnd1 0
* Added Console Commands to send KNX Values
usage: KnxTx_Val[slot] value
where [slot] is any of the 5 slots on the KNX Menu and value is a number
example: KnxTx_Val1 35
* Added Slots on the KNX Web Menu to select Group Addess to send data from console commands
* Added Events to trigger rules when received data from KNX
usage on rules as: event#KnxRx_Val[slot]
where [slot] is any of the 5 slots on the KNX Menu
example: rule on event#KnxRx_Val1 do VAR1 %value% endon
* Added Events to trigger rules when received read requests from KNX
usage on rules as: event#KnxRx_Req[slot]
where [slot] is any of the 5 slots on the KNX Menu
example: rule on event#KnxRx_Req1 do KnxTx_Val1 35 endon
* Added Slots on the KNX Web Menu to select Group Addess to receive data to trigger rules
