#-------------------------------------------------------------
 - Specialized driver for AXP2102 of M5Core2v1_1
 -------------------------------------------------------------#
class AXP2102_M5Core2v1_1 : AXP2102
  def init()
    super(self).init()
    if self.wire
      # From https://github.com/m5stack/M5Unified/blob/b8cfec7fed046242da7f7b8024a4e92004a51ff7/src/utility/Power_Class.cpp#L351-L360
      # for Core2 v1.1
      # static constexpr std::uint8_t reg_data_array[] =
      # { 0x27, 0x00 // PowerKey Hold=1sec / PowerOff=4sec
      # , 0x10, 0x30 // PMU common config (internal off-discharge enable)
      # , 0x12, 0x00 // BATFET disable
      # , 0x68, 0x01 // Battery detection enabled.
      # , 0x69, 0x13 // CHGLED setting
      # , 0x99, 0x00 // DLDO1 set 0.5v (vibration motor)
      # , 0x30, 0x0F // ADC enabled (for voltage measurement)
      # // , 0x18, 0x0E
      # };
      self.write8(0x90, 0xBE)     # LDOS ON/OFF control 0
      self.write8(0x92, 0x00)     # ALDO1 off
      self.write8(0x93, 33 -5)    # ALDO2 on, set to 3.3v // AXP_ILI9342C_RTS
      self.write8(0x94, 0x00)     # ALDO3 on, set to 0.5V // AXP_SPK_EN off
      self.write8(0x95, 33 -5)    # ALDO4 on, set to 3.3v // AXP_ILI9342C_POWER
      self.write8(0x96, 0x00)     # BLDO1 on, set to 0.5V // AXP_ILI9342C_BL off
      self.write8(0x99, 0x00)     # DLDO1 on, set to 0.5V // AXP_VIB off
      self.write8(0x27, 0x00)     # PowerKey Hold=1sec // PowerOff=4sec
      self.write8(0x22, 0x06)     # PWROFF_EN behavior
      self.write8(0x10, 0x30)     # PMU common config
      self.write8(0x12, 0x00)     # BATFET disabled
      self.write8(0x68, 0x01)     # Battery detection enabled
      self.write8(0x69, 0x13)     # CHGLED setting
      self.write8(0x30, 0x0F)     # ADC enabled (for voltage measurement)
      tasmota.add_driver(self)
    end
  end

  # set LCD backlight voltage on BLDO1
  def set_lcd_voltage(voltage)
    if (voltage < 2500)  voltage = 2500 end
    if (voltage > 3300)  voltage = 3300 end
    self.set_ldo_voltage(4, voltage) # 4=BLD01
  end

  # Speaker enable
  def set_speaker_enable(state)
    self.set_ldo_voltage(2, state ? 3300 : 0)   # 2 = ALDO3
  end

  # Dimmer in percentage
  def set_displaydimmer(x)
    var v = tasmota.scale_uint(x, 0, 100, 2500, 3300)
    self.set_lcd_voltage(v)
  end

  # respond to display events
  def display(cmd, idx, payload, raw)
    if cmd == "dim" || cmd == "power"
      self.set_displaydimmer(idx)
    end
  end

end
return AXP2102_M5Core2v1_1()