// Copyright 2013 mpflaga
// Copyright 2015 kitlaan
// Copyright 2017 Jason kendall, David Conran

/// @file
/// @brief Support for MagiQuest protocols.
/// @see https://github.com/kitlaan/Arduino-IRremote/blob/master/ir_Magiquest.cpp
/// @see https://github.com/mpflaga/Arduino-IRremote

#include "ir_Magiquest.h"
#include <algorithm>
#include "IRrecv.h"
#include "IRsend.h"
#include "IRutils.h"

#define IS_ZERO(m, s) (((m)*100 / ((m) + (s))) <= kMagiQuestZeroRatio)
#define IS_ONE(m, s) (((m)*100 / ((m) + (s))) >= kMagiQuestOneRatio)

#if SEND_MAGIQUEST
/// Send a MagiQuest formatted message.
/// Status: Beta / Should be working.
/// @param[in] data The message to be sent.
/// @param[in] nbits The number of bits of message to be sent.
/// @param[in] repeat The number of times the command is to be repeated.
void IRsend::sendMagiQuest(const uint64_t data, const uint16_t nbits,
                           const uint16_t repeat) {
  sendGeneric(0, 0,  // No Headers - Technically it's included in the data.
                     // i.e. 8 zeros.
              kMagiQuestMarkOne, kMagiQuestSpaceOne, kMagiQuestMarkZero,
              kMagiQuestSpaceZero,
              0,  // No footer mark.
              kMagiQuestGap, data, nbits, 36, true, repeat, 50);
}

/// Encode a MagiQuest wand_id, and a magnitude into a single 64bit value.
/// (Only 48 bits of real data + 8 leading zero bits)
/// This is suitable for calling sendMagiQuest() with.
/// e.g. sendMagiQuest(encodeMagiQuest(wand_id, magnitude))
/// @param[in] wand_id The value for the wand ID.
/// @param[in] magnitude The value for the magnitude
/// @return A code suitable for calling sendMagiQuest() with.
uint64_t IRsend::encodeMagiQuest(const uint32_t wand_id,
                                 const uint16_t magnitude) {
  uint64_t result = 0;
  result = wand_id;
  result <<= 16;
  result |= magnitude;
  // Shouldn't be needed, but ensure top 8/16 bit are zero.
  result &= 0xFFFFFFFFFFFFULL;
  return result;
}
#endif  // SEND_MAGIQUEST

#if DECODE_MAGIQUEST
/// Decode the supplied MagiQuest message.
/// Status: Beta / Should work.
/// @param[in,out] results Ptr to the data to decode & where to store the result
/// @param[in] offset The starting index to use when attempting to decode the
///   raw data. Typically/Defaults to kStartOffset.
/// @param[in] nbits The number of data bits to expect.
/// @param[in] strict Flag indicating if we should perform strict matching.
/// @return True if it can decode it, false if it can't.
/// @note MagiQuest protocol appears to be a header of 8 'zero' bits, followed
/// by 32 bits of "wand ID" and finally 16 bits of "magnitude".
/// Even though we describe this protocol as 56 bits, it really only has
/// 48 bits of data that matter.
/// In transmission order, 8 zeros + 32 wand_id + 16 magnitude.
/// @see https://github.com/kitlaan/Arduino-IRremote/blob/master/ir_Magiquest.cpp
bool IRrecv::decodeMagiQuest(decode_results *results, uint16_t offset,
                             const uint16_t nbits, const bool strict) {
  uint16_t bits = 0;
  uint64_t data = 0;

  if (results->rawlen < (2 * kMagiquestBits) + offset - 1) {
    DPRINT("Not enough bits to be Magiquest - Rawlen: ");
    DPRINT(results->rawlen);
    DPRINT(" Expected: ");
    DPRINTLN(2 * kMagiquestBits + offset - 1);
    return false;
  }

  // Compliance
  if (strict && nbits != kMagiquestBits) return false;

  // Of six wands as datapoints, so far they all start with 8 ZEROs.
  // For example, here is the data from two wands
  // 00000000 00100011 01001100 00100110 00000010 00000010 00010111
  // 00000000 00100000 10001000 00110001 00000010 00000010 10110100

  // Decode the (MARK + SPACE) bits
  while (offset + 1 < results->rawlen && bits < nbits - 1) {
    uint16_t mark = results->rawbuf[offset];
    uint16_t space = results->rawbuf[offset + 1];
    if (!matchMark(mark + space, kMagiQuestTotalUsec)) {
      DPRINT("Not enough time to be Magiquest - Mark: ");
      DPRINT(mark);
      DPRINT(" Space: ");
      DPRINT(space);
      DPRINT(" Total: ");
      DPRINT(mark + space);
      DPRINT("Expected: ");
      DPRINTLN(kMagiQuestTotalUsec);
      return false;
    }

    if (IS_ZERO(mark, space))
      data = (data << 1) | 0;
    else if (IS_ONE(mark, space))
      data = (data << 1) | 1;
    else
      return false;

    bits++;
    offset += 2;

    // Compliance
    // The first 8 bits of this protocol are supposed to all be 0.
    // Exit out early as it is never going to match.
    if (strict && bits == 8 && data != 0) return false;
  }

  // Last bit is special as the protocol ends with a SPACE, not a MARK.
  // Grab the last MARK bit, assuming a good SPACE after it
  if (offset < results->rawlen) {
    uint16_t mark = results->rawbuf[offset];
    uint16_t space = (kMagiQuestTotalUsec / kRawTick) - mark;

    if (IS_ZERO(mark, space))
      data = (data << 1) | 0;
    else if (IS_ONE(mark, space))
      data = (data << 1) | 1;
    else
      return false;

    bits++;
  }

  if (bits != nbits) return false;

  if (strict) {
    // The top 8 bits of the 56 bits needs to be 0x00 to be valid.
    // i.e. bits 56 to 49 are all zero.
    if ((data >> (nbits - 8)) != 0) return false;
  }

  // Success
  results->decode_type = MAGIQUEST;
  results->bits = bits;
  results->value = data;
  results->address = data >> 16;     // Wand ID
  results->command = data & 0xFFFF;  // Magnitude
  return true;
}
#endif  // DECODE_MAGIQUEST