// Copyright 2017 David Conran

// Toshiba A/C support added by David Conran


#include "ir_Toshiba.h"
#include <algorithm>
#include <cstring>
#ifndef ARDUINO
#include <string>
#endif
#include "IRrecv.h"
#include "IRsend.h"
#include "IRtext.h"
#include "IRutils.h"

//
// Equipment it seems compatible with:
//  * Toshiba RAS-B13N3KV2 / Akita EVO II
//  * Toshiba RAS-B13N3KVP-E, RAS 18SKP-ES
//  * Toshiba WH-TA04NE, WC-L03SE
//  * <Add models (A/C & remotes) you've gotten it working with here>

// Constants

// Toshiba A/C
// Ref:
//   https://github.com/r45635/HVAC-IR-Control/blob/master/HVAC_ESP8266/HVAC_ESP8266T.ino#L77
const uint16_t kToshibaAcHdrMark = 4400;
const uint16_t kToshibaAcHdrSpace = 4300;
const uint16_t kToshibaAcBitMark = 543;
const uint16_t kToshibaAcOneSpace = 1623;
const uint16_t kToshibaAcZeroSpace = 472;
const uint16_t kToshibaAcMinGap = 7048;

using irutils::addBoolToString;
using irutils::addFanToString;
using irutils::addIntToString;
using irutils::addLabeledString;
using irutils::addModeToString;
using irutils::addTempToString;
using irutils::setBit;
using irutils::setBits;

#if SEND_TOSHIBA_AC
// Send a Toshiba A/C message.
//
// Args:
//   data: An array of bytes containing the IR command.
//   nbytes: Nr. of bytes of data in the array. (>=kToshibaACStateLength)
//   repeat: Nr. of times the message is to be repeated.
//          (Default = kToshibaACMinRepeat).
//
// Status: StABLE / Working.
//
void IRsend::sendToshibaAC(const unsigned char data[], const uint16_t nbytes,
                           const uint16_t repeat) {
  if (nbytes < kToshibaACStateLength)
    return;  // Not enough bytes to send a proper message.
  sendGeneric(kToshibaAcHdrMark, kToshibaAcHdrSpace, kToshibaAcBitMark,
              kToshibaAcOneSpace, kToshibaAcBitMark, kToshibaAcZeroSpace,
              kToshibaAcBitMark, kToshibaAcMinGap, data, nbytes, 38, true,
              repeat, 50);
}
#endif  // SEND_TOSHIBA_AC

// Code to emulate Toshiba A/C IR remote control unit.
// Inspired and derived from the work done at:
//   https://github.com/r45635/HVAC-IR-Control
//
// Status:  STABLE / Working.
//
// Initialise the object.
IRToshibaAC::IRToshibaAC(const uint16_t pin, const bool inverted,
                         const bool use_modulation)
    : _irsend(pin, inverted, use_modulation) { this->stateReset(); }

// Reset the state of the remote to a known good state/sequence.
void IRToshibaAC::stateReset(void) {
  // The state of the IR remote in IR code form.
  // Known good state obtained from:
  //   https://github.com/r45635/HVAC-IR-Control/blob/master/HVAC_ESP8266/HVAC_ESP8266T.ino#L103
  static const uint8_t kReset[kToshibaACStateLength] = {
      0xF2, 0x0D, 0x03, 0xFC, 0x01};
  memcpy(remote_state, kReset, kToshibaACStateLength);
  mode_state = getMode(true);
}

// Configure the pin for output.
void IRToshibaAC::begin(void) { _irsend.begin(); }

#if SEND_TOSHIBA_AC
// Send the current desired state to the IR LED.
void IRToshibaAC::send(const uint16_t repeat) {
  _irsend.sendToshibaAC(getRaw(), kToshibaACStateLength, repeat);
}
#endif  // SEND_TOSHIBA_AC

// Return a pointer to the internal state date of the remote.
uint8_t* IRToshibaAC::getRaw(void) {
  this->checksum();
  return remote_state;
}

// Override the internal state with the new state.
void IRToshibaAC::setRaw(const uint8_t newState[]) {
  memcpy(remote_state, newState, kToshibaACStateLength);
  mode_state = this->getMode(true);
}

// Calculate the checksum for a given array.
// Args:
//   state:  The array to calculate the checksum over.
//   length: The size of the array.
// Returns:
//   The 8 bit checksum value.
uint8_t IRToshibaAC::calcChecksum(const uint8_t state[],
                                  const uint16_t length) {
  uint8_t checksum = 0;
  // Only calculate it for valid lengths.
  if (length > 1) {
    // Checksum is simple XOR of all bytes except the last one.
    for (uint8_t i = 0; i < length - 1; i++) checksum ^= state[i];
  }
  return checksum;
}

// Verify the checksum is valid for a given state.
// Args:
//   state:  The array to verify the checksum of.
//   length: The size of the state.
// Returns:
//   A boolean.
bool IRToshibaAC::validChecksum(const uint8_t state[], const uint16_t length) {
  return (length > 1 && state[length - 1] == IRToshibaAC::calcChecksum(state,
                                                                       length));
}

// Calculate & set the checksum for the current internal state of the remote.
void IRToshibaAC::checksum(const uint16_t length) {
  // Stored the checksum value in the last byte.
  if (length > 1) remote_state[length - 1] = this->calcChecksum(remote_state,
                                                                length);
}

// Set the requested power state of the A/C to on.
void IRToshibaAC::on(void) { setPower(true); }

// Set the requested power state of the A/C to off.
void IRToshibaAC::off(void) { setPower(false); }

// Set the requested power state of the A/C.
void IRToshibaAC::setPower(const bool on) {
  setBit(&remote_state[6], kToshibaAcPowerOffset, !on);  // Cleared when on.
  if (on)
    setMode(mode_state);
  else
    setBits(&remote_state[6], kToshibaAcModeOffset, kToshibaAcModeSize,
            kToshibaAcHeat);
}

// Return the requested power state of the A/C.
bool IRToshibaAC::getPower(void) {
  return !GETBIT8(remote_state[6], kToshibaAcPowerOffset);
}

// Set the temp. in deg C
void IRToshibaAC::setTemp(const uint8_t degrees) {
  uint8_t temp = std::max((uint8_t)kToshibaAcMinTemp, degrees);
  temp = std::min((uint8_t)kToshibaAcMaxTemp, temp);
  setBits(&remote_state[5], kToshibaAcTempOffset, kToshibaAcTempSize,
          temp - kToshibaAcMinTemp);
}

// Return the set temp. in deg C
uint8_t IRToshibaAC::getTemp(void) {
  return GETBITS8(remote_state[5], kToshibaAcTempOffset, kToshibaAcTempSize) +
      kToshibaAcMinTemp;
}

// Set the speed of the fan, 0-5.
// 0 is auto, 1-5 is the speed, 5 is Max.
void IRToshibaAC::setFan(const uint8_t speed) {
  uint8_t fan = speed;
  // Bounds check
  if (fan > kToshibaAcFanMax)
    fan = kToshibaAcFanMax;  // Set the fan to maximum if out of range.
  if (fan > kToshibaAcFanAuto) fan++;
  setBits(&remote_state[6], kToshibaAcFanOffset, kToshibaAcFanSize, fan);
}

// Return the requested state of the unit's fan.
uint8_t IRToshibaAC::getFan(void) {
  uint8_t fan = GETBITS8(remote_state[6], kToshibaAcFanOffset,
                         kToshibaAcFanSize);
  if (fan == kToshibaAcFanAuto) return kToshibaAcFanAuto;
  return --fan;
}

// Get the requested climate operation mode of the a/c unit.
// Args:
//   useRaw:  Indicate to get the mode from the state array. (Default: false)
// Returns:
//   A uint8_t containing the A/C mode.
uint8_t IRToshibaAC::getMode(const bool useRaw) {
  if (useRaw)
    return GETBITS8(remote_state[6], kToshibaAcModeOffset, kToshibaAcModeSize);
  else
    return mode_state;
}

// Set the requested climate operation mode of the a/c unit.
void IRToshibaAC::setMode(const uint8_t mode) {
  // If we get an unexpected mode, default to AUTO.
  switch (mode) {
    case kToshibaAcAuto:
    case kToshibaAcCool:
    case kToshibaAcDry:
    case kToshibaAcHeat:
      mode_state = mode;
      // Only adjust the remote_state if we have power set to on.
      if (getPower())
        setBits(&remote_state[6], kToshibaAcModeOffset, kToshibaAcModeSize,
                mode_state);
      return;
    default: this->setMode(kToshibaAcAuto);  // There is no Fan mode.
  }
}

// Convert a standard A/C mode into its native mode.
uint8_t IRToshibaAC::convertMode(const stdAc::opmode_t mode) {
  switch (mode) {
    case stdAc::opmode_t::kCool: return kToshibaAcCool;
    case stdAc::opmode_t::kHeat: return kToshibaAcHeat;
    case stdAc::opmode_t::kDry:  return kToshibaAcDry;
    // No Fan mode.
    default:                     return kToshibaAcAuto;
  }
}

// Convert a standard A/C Fan speed into its native fan speed.
uint8_t IRToshibaAC::convertFan(const stdAc::fanspeed_t speed) {
  switch (speed) {
    case stdAc::fanspeed_t::kMin:    return kToshibaAcFanMax - 4;
    case stdAc::fanspeed_t::kLow:    return kToshibaAcFanMax - 3;
    case stdAc::fanspeed_t::kMedium: return kToshibaAcFanMax - 2;
    case stdAc::fanspeed_t::kHigh:   return kToshibaAcFanMax - 1;
    case stdAc::fanspeed_t::kMax:    return kToshibaAcFanMax;
    default:                         return kToshibaAcFanAuto;
  }
}

// Convert a native mode to it's common equivalent.
stdAc::opmode_t IRToshibaAC::toCommonMode(const uint8_t mode) {
  switch (mode) {
    case kToshibaAcCool: return stdAc::opmode_t::kCool;
    case kToshibaAcHeat: return stdAc::opmode_t::kHeat;
    case kToshibaAcDry:  return stdAc::opmode_t::kDry;
    default:             return stdAc::opmode_t::kAuto;
  }
}

// Convert a native fan speed to it's common equivalent.
stdAc::fanspeed_t IRToshibaAC::toCommonFanSpeed(const uint8_t spd) {
  switch (spd) {
    case kToshibaAcFanMax:     return stdAc::fanspeed_t::kMax;
    case kToshibaAcFanMax - 1: return stdAc::fanspeed_t::kHigh;
    case kToshibaAcFanMax - 2: return stdAc::fanspeed_t::kMedium;
    case kToshibaAcFanMax - 3: return stdAc::fanspeed_t::kLow;
    case kToshibaAcFanMax - 4: return stdAc::fanspeed_t::kMin;
    default:                   return stdAc::fanspeed_t::kAuto;
  }
}

// Convert the A/C state to it's common equivalent.
stdAc::state_t IRToshibaAC::toCommon(void) {
  stdAc::state_t result;
  result.protocol = decode_type_t::TOSHIBA_AC;
  result.model = -1;  // Not supported.
  result.power = this->getPower();
  result.mode = this->toCommonMode(this->getMode());
  result.celsius = true;
  result.degrees = this->getTemp();
  result.fanspeed = this->toCommonFanSpeed(this->getFan());
  // Not supported.
  result.turbo = false;
  result.light = false;
  result.filter = false;
  result.econo = false;
  result.swingv = stdAc::swingv_t::kOff;
  result.swingh = stdAc::swingh_t::kOff;
  result.quiet = false;
  result.clean = false;
  result.beep = false;
  result.sleep = -1;
  result.clock = -1;
  return result;
}

// Convert the internal state into a human readable string.
String IRToshibaAC::toString(void) {
  String result = "";
  result.reserve(40);
  result += addBoolToString(getPower(), kPowerStr, false);
  result += addModeToString(getMode(), kToshibaAcAuto, kToshibaAcCool,
                            kToshibaAcHeat, kToshibaAcDry, kToshibaAcAuto);
  result += addTempToString(getTemp());
  result += addFanToString(getFan(), kToshibaAcFanMax, kToshibaAcFanMin,
                           kToshibaAcFanAuto, kToshibaAcFanAuto,
                           kToshibaAcFanMed);
  return result;
}

#if DECODE_TOSHIBA_AC
// Decode a Toshiba AC IR message if possible.
// Places successful decode information in the results pointer.
// Args:
//   results: Ptr to the data to decode and where to store the decode result.
//   offset:  The starting index to use when attempting to decode the raw data.
//            Typically/Defaults to kStartOffset.
//   nbits:   The number of data bits to expect. Typically kToshibaACBits.
//   strict:  Flag to indicate if we strictly adhere to the specification.
// Returns:
//   boolean: True if it can decode it, false if it can't.
//
// Status:  STABLE / Working.
//
// Ref:
//
bool IRrecv::decodeToshibaAC(decode_results* results, uint16_t offset,
                             const uint16_t nbits, const bool strict) {
  // Compliance
  if (strict && nbits != kToshibaACBits)
    return false;  // Must be called with the correct nr. of bytes.

  // Match Header + Data + Footer
  if (!matchGeneric(results->rawbuf + offset, results->state,
                    results->rawlen - offset, nbits,
                    kToshibaAcHdrMark, kToshibaAcHdrSpace,
                    kToshibaAcBitMark, kToshibaAcOneSpace,
                    kToshibaAcBitMark, kToshibaAcZeroSpace,
                    kToshibaAcBitMark, kToshibaAcMinGap, true,
                    _tolerance, kMarkExcess)) return false;
  // Compliance
  if (strict) {
    // Check that the checksum of the message is correct.
    if (!IRToshibaAC::validChecksum(results->state)) return false;
  }

  // Success
  results->decode_type = TOSHIBA_AC;
  results->bits = nbits;
  // No need to record the state as we stored it as we decoded it.
  // As we use result->state, we don't record value, address, or command as it
  // is a union data type.
  return true;
}
#endif  // DECODE_TOSHIBA_AC