0e0275cf43
* ili9341 update * update ili9341 * Update support_tasmota.ino * fix scripter bug * Deep+ * Update ILI9341_2.cpp Fix invert display * Update xdsp_04_ili9341.ino Fix display modes * fix ili9341 m5stack * Refactor DHT negative temps * Standardize on unconnected pin being -1 * Back to chain+ * Strict * strict * Update platformio_tasmota32.ini * Fix renderer * Change NeoPixelBus library from v2.6.0 to v2.6.1.4 * display batch * Update xdrv_13_display.ino * ldf strict Co-authored-by: gemu2015 <gmutz2010@googlemail.com> Co-authored-by: Theo Arends <11044339+arendst@users.noreply.github.com>
89 lines
2.6 KiB
C++
89 lines
2.6 KiB
C++
// DotStarTest
|
|
// This example will cycle between showing four pixels as Red, Green, Blue, White
|
|
// and then showing those pixels as Black.
|
|
//
|
|
// There is serial output of the current state so you can confirm and follow along
|
|
//
|
|
|
|
#include <NeoPixelBus.h>
|
|
|
|
const uint16_t PixelCount = 4; // this example assumes 4 pixels, making it smaller will cause a failure
|
|
|
|
// make sure to set this to the correct pins
|
|
const uint8_t DotClockPin = 2;
|
|
const uint8_t DotDataPin = 3;
|
|
|
|
#define colorSaturation 128
|
|
|
|
// for software bit bang
|
|
NeoPixelBus<DotStarBgrFeature, DotStarMethod> strip(PixelCount, DotClockPin, DotDataPin);
|
|
|
|
// for hardware SPI (best performance but must use hardware pins)
|
|
//NeoPixelBus<DotStarBgrFeature, DotStarSpiMethod> strip(PixelCount);
|
|
|
|
// DotStars that support RGB color and a overall luminance/brightness value
|
|
// NeoPixelBus<DotStarLbgrFeature, DotStarMethod> strip(PixelCount, DotClockPin, DotDataPin);
|
|
// DotStars that support RGBW color with a seperate white element
|
|
//NeoPixelBus<DotStarWbgrFeature, DotStarMethod> strip(PixelCount, DotClockPin, DotDataPin);
|
|
|
|
RgbColor red(colorSaturation, 0, 0);
|
|
RgbColor green(0, colorSaturation, 0);
|
|
RgbColor blue(0, 0, colorSaturation);
|
|
RgbColor white(colorSaturation);
|
|
RgbColor black(0);
|
|
|
|
// for use with RGB DotStars when using the luminance/brightness global value
|
|
// note that its range is only 0 - 31 (31 is full bright) and
|
|
// also note that it is not useful for POV displays as it will cause more flicker
|
|
RgbwColor redL(colorSaturation, 0, 0, 31); // use white value to store luminance
|
|
RgbwColor greenL(0, colorSaturation, 0, 31); // use white value to store luminance
|
|
RgbwColor blueL(0, 0, colorSaturation, 31); // use white value to store luminance
|
|
RgbwColor whiteL(255, 255, 255, colorSaturation / 8); // luminance is only 0-31
|
|
|
|
void setup()
|
|
{
|
|
Serial.begin(115200);
|
|
while (!Serial); // wait for serial attach
|
|
|
|
Serial.println();
|
|
Serial.println("Initializing...");
|
|
Serial.flush();
|
|
|
|
// this resets all the neopixels to an off state
|
|
strip.Begin();
|
|
strip.ClearTo(black);
|
|
strip.Show();
|
|
|
|
Serial.println();
|
|
Serial.println("Running...");
|
|
}
|
|
|
|
|
|
void loop()
|
|
{
|
|
delay(5000);
|
|
|
|
Serial.println("Colors R, G, B, W...");
|
|
|
|
// set the colors,
|
|
strip.SetPixelColor(0, red);
|
|
strip.SetPixelColor(1, green);
|
|
strip.SetPixelColor(2, blue);
|
|
strip.SetPixelColor(3, white);
|
|
strip.Show();
|
|
|
|
|
|
delay(5000);
|
|
|
|
Serial.println("Off ...");
|
|
|
|
// turn off the pixels
|
|
strip.SetPixelColor(0, black);
|
|
strip.SetPixelColor(1, black);
|
|
strip.SetPixelColor(2, black);
|
|
strip.SetPixelColor(3, black);
|
|
strip.Show();
|
|
|
|
}
|
|
|