9f752b9230
The previous included version (1.0.10) was failing to read more than 32 bytes of data from I2C devices (tested on AMG8833 which typically reads 128 bytes -whose support is in progress-). The problem was fixed in version 1.9.0. Currently, this library is required and used just by the Adafruit_VEML7700 library. The VEML7700 sensor has been tested and proved to correctly work. Signed-off-by: Roberto Bonacina <roby.bonacina@tutanota.com>
366 lines
11 KiB
C++
366 lines
11 KiB
C++
#include <Adafruit_BusIO_Register.h>
|
|
|
|
#if !defined(SPI_INTERFACES_COUNT) || \
|
|
(defined(SPI_INTERFACES_COUNT) && (SPI_INTERFACES_COUNT > 0))
|
|
|
|
/*!
|
|
* @brief Create a register we access over an I2C Device (which defines the
|
|
* bus and address)
|
|
* @param i2cdevice The I2CDevice to use for underlying I2C access
|
|
* @param reg_addr The address pointer value for the I2C/SMBus register, can
|
|
* be 8 or 16 bits
|
|
* @param width The width of the register data itself, defaults to 1 byte
|
|
* @param byteorder The byte order of the register (used when width is > 1),
|
|
* defaults to LSBFIRST
|
|
* @param address_width The width of the register address itself, defaults
|
|
* to 1 byte
|
|
*/
|
|
Adafruit_BusIO_Register::Adafruit_BusIO_Register(Adafruit_I2CDevice *i2cdevice,
|
|
uint16_t reg_addr,
|
|
uint8_t width,
|
|
uint8_t byteorder,
|
|
uint8_t address_width) {
|
|
_i2cdevice = i2cdevice;
|
|
_spidevice = NULL;
|
|
_addrwidth = address_width;
|
|
_address = reg_addr;
|
|
_byteorder = byteorder;
|
|
_width = width;
|
|
}
|
|
|
|
/*!
|
|
* @brief Create a register we access over an SPI Device (which defines the
|
|
* bus and CS pin)
|
|
* @param spidevice The SPIDevice to use for underlying SPI access
|
|
* @param reg_addr The address pointer value for the SPI register, can
|
|
* be 8 or 16 bits
|
|
* @param type The method we use to read/write data to SPI (which is not
|
|
* as well defined as I2C)
|
|
* @param width The width of the register data itself, defaults to 1 byte
|
|
* @param byteorder The byte order of the register (used when width is > 1),
|
|
* defaults to LSBFIRST
|
|
* @param address_width The width of the register address itself, defaults
|
|
* to 1 byte
|
|
*/
|
|
Adafruit_BusIO_Register::Adafruit_BusIO_Register(Adafruit_SPIDevice *spidevice,
|
|
uint16_t reg_addr,
|
|
Adafruit_BusIO_SPIRegType type,
|
|
uint8_t width,
|
|
uint8_t byteorder,
|
|
uint8_t address_width) {
|
|
_spidevice = spidevice;
|
|
_spiregtype = type;
|
|
_i2cdevice = NULL;
|
|
_addrwidth = address_width;
|
|
_address = reg_addr;
|
|
_byteorder = byteorder;
|
|
_width = width;
|
|
}
|
|
|
|
/*!
|
|
* @brief Create a register we access over an I2C or SPI Device. This is a
|
|
* handy function because we can pass in NULL for the unused interface, allowing
|
|
* libraries to mass-define all the registers
|
|
* @param i2cdevice The I2CDevice to use for underlying I2C access, if NULL
|
|
* we use SPI
|
|
* @param spidevice The SPIDevice to use for underlying SPI access, if NULL
|
|
* we use I2C
|
|
* @param reg_addr The address pointer value for the I2C/SMBus/SPI register,
|
|
* can be 8 or 16 bits
|
|
* @param type The method we use to read/write data to SPI (which is not
|
|
* as well defined as I2C)
|
|
* @param width The width of the register data itself, defaults to 1 byte
|
|
* @param byteorder The byte order of the register (used when width is > 1),
|
|
* defaults to LSBFIRST
|
|
* @param address_width The width of the register address itself, defaults
|
|
* to 1 byte
|
|
*/
|
|
Adafruit_BusIO_Register::Adafruit_BusIO_Register(
|
|
Adafruit_I2CDevice *i2cdevice, Adafruit_SPIDevice *spidevice,
|
|
Adafruit_BusIO_SPIRegType type, uint16_t reg_addr, uint8_t width,
|
|
uint8_t byteorder, uint8_t address_width) {
|
|
_spidevice = spidevice;
|
|
_i2cdevice = i2cdevice;
|
|
_spiregtype = type;
|
|
_addrwidth = address_width;
|
|
_address = reg_addr;
|
|
_byteorder = byteorder;
|
|
_width = width;
|
|
}
|
|
|
|
/*!
|
|
* @brief Write a buffer of data to the register location
|
|
* @param buffer Pointer to data to write
|
|
* @param len Number of bytes to write
|
|
* @return True on successful write (only really useful for I2C as SPI is
|
|
* uncheckable)
|
|
*/
|
|
bool Adafruit_BusIO_Register::write(uint8_t *buffer, uint8_t len) {
|
|
|
|
uint8_t addrbuffer[2] = {(uint8_t)(_address & 0xFF),
|
|
(uint8_t)(_address >> 8)};
|
|
|
|
if (_i2cdevice) {
|
|
return _i2cdevice->write(buffer, len, true, addrbuffer, _addrwidth);
|
|
}
|
|
if (_spidevice) {
|
|
if (_spiregtype == ADDRESSED_OPCODE_BIT0_LOW_TO_WRITE) {
|
|
// very special case!
|
|
|
|
// pass the special opcode address which we set as the high byte of the
|
|
// regaddr
|
|
addrbuffer[0] =
|
|
(uint8_t)(_address >> 8) & ~0x01; // set bottom bit low to write
|
|
// the 'actual' reg addr is the second byte then
|
|
addrbuffer[1] = (uint8_t)(_address & 0xFF);
|
|
// the address appears to be a byte longer
|
|
return _spidevice->write(buffer, len, addrbuffer, _addrwidth + 1);
|
|
}
|
|
|
|
if (_spiregtype == ADDRBIT8_HIGH_TOREAD) {
|
|
addrbuffer[0] &= ~0x80;
|
|
}
|
|
if (_spiregtype == ADDRBIT8_HIGH_TOWRITE) {
|
|
addrbuffer[0] |= 0x80;
|
|
}
|
|
if (_spiregtype == AD8_HIGH_TOREAD_AD7_HIGH_TOINC) {
|
|
addrbuffer[0] &= ~0x80;
|
|
addrbuffer[0] |= 0x40;
|
|
}
|
|
return _spidevice->write(buffer, len, addrbuffer, _addrwidth);
|
|
}
|
|
return false;
|
|
}
|
|
|
|
/*!
|
|
* @brief Write up to 4 bytes of data to the register location
|
|
* @param value Data to write
|
|
* @param numbytes How many bytes from 'value' to write
|
|
* @return True on successful write (only really useful for I2C as SPI is
|
|
* uncheckable)
|
|
*/
|
|
bool Adafruit_BusIO_Register::write(uint32_t value, uint8_t numbytes) {
|
|
if (numbytes == 0) {
|
|
numbytes = _width;
|
|
}
|
|
if (numbytes > 4) {
|
|
return false;
|
|
}
|
|
|
|
// store a copy
|
|
_cached = value;
|
|
|
|
for (int i = 0; i < numbytes; i++) {
|
|
if (_byteorder == LSBFIRST) {
|
|
_buffer[i] = value & 0xFF;
|
|
} else {
|
|
_buffer[numbytes - i - 1] = value & 0xFF;
|
|
}
|
|
value >>= 8;
|
|
}
|
|
return write(_buffer, numbytes);
|
|
}
|
|
|
|
/*!
|
|
* @brief Read data from the register location. This does not do any error
|
|
* checking!
|
|
* @return Returns 0xFFFFFFFF on failure, value otherwise
|
|
*/
|
|
uint32_t Adafruit_BusIO_Register::read(void) {
|
|
if (!read(_buffer, _width)) {
|
|
return -1;
|
|
}
|
|
|
|
uint32_t value = 0;
|
|
|
|
for (int i = 0; i < _width; i++) {
|
|
value <<= 8;
|
|
if (_byteorder == LSBFIRST) {
|
|
value |= _buffer[_width - i - 1];
|
|
} else {
|
|
value |= _buffer[i];
|
|
}
|
|
}
|
|
|
|
return value;
|
|
}
|
|
|
|
/*!
|
|
* @brief Read cached data from last time we wrote to this register
|
|
* @return Returns 0xFFFFFFFF on failure, value otherwise
|
|
*/
|
|
uint32_t Adafruit_BusIO_Register::readCached(void) { return _cached; }
|
|
|
|
/*!
|
|
* @brief Read a buffer of data from the register location
|
|
* @param buffer Pointer to data to read into
|
|
* @param len Number of bytes to read
|
|
* @return True on successful write (only really useful for I2C as SPI is
|
|
* uncheckable)
|
|
*/
|
|
bool Adafruit_BusIO_Register::read(uint8_t *buffer, uint8_t len) {
|
|
uint8_t addrbuffer[2] = {(uint8_t)(_address & 0xFF),
|
|
(uint8_t)(_address >> 8)};
|
|
|
|
if (_i2cdevice) {
|
|
return _i2cdevice->write_then_read(addrbuffer, _addrwidth, buffer, len);
|
|
}
|
|
if (_spidevice) {
|
|
if (_spiregtype == ADDRESSED_OPCODE_BIT0_LOW_TO_WRITE) {
|
|
// very special case!
|
|
|
|
// pass the special opcode address which we set as the high byte of the
|
|
// regaddr
|
|
addrbuffer[0] =
|
|
(uint8_t)(_address >> 8) | 0x01; // set bottom bit high to read
|
|
// the 'actual' reg addr is the second byte then
|
|
addrbuffer[1] = (uint8_t)(_address & 0xFF);
|
|
// the address appears to be a byte longer
|
|
return _spidevice->write_then_read(addrbuffer, _addrwidth + 1, buffer,
|
|
len);
|
|
}
|
|
if (_spiregtype == ADDRBIT8_HIGH_TOREAD) {
|
|
addrbuffer[0] |= 0x80;
|
|
}
|
|
if (_spiregtype == ADDRBIT8_HIGH_TOWRITE) {
|
|
addrbuffer[0] &= ~0x80;
|
|
}
|
|
if (_spiregtype == AD8_HIGH_TOREAD_AD7_HIGH_TOINC) {
|
|
addrbuffer[0] |= 0x80 | 0x40;
|
|
}
|
|
return _spidevice->write_then_read(addrbuffer, _addrwidth, buffer, len);
|
|
}
|
|
return false;
|
|
}
|
|
|
|
/*!
|
|
* @brief Read 2 bytes of data from the register location
|
|
* @param value Pointer to uint16_t variable to read into
|
|
* @return True on successful write (only really useful for I2C as SPI is
|
|
* uncheckable)
|
|
*/
|
|
bool Adafruit_BusIO_Register::read(uint16_t *value) {
|
|
if (!read(_buffer, 2)) {
|
|
return false;
|
|
}
|
|
|
|
if (_byteorder == LSBFIRST) {
|
|
*value = _buffer[1];
|
|
*value <<= 8;
|
|
*value |= _buffer[0];
|
|
} else {
|
|
*value = _buffer[0];
|
|
*value <<= 8;
|
|
*value |= _buffer[1];
|
|
}
|
|
return true;
|
|
}
|
|
|
|
/*!
|
|
* @brief Read 1 byte of data from the register location
|
|
* @param value Pointer to uint8_t variable to read into
|
|
* @return True on successful write (only really useful for I2C as SPI is
|
|
* uncheckable)
|
|
*/
|
|
bool Adafruit_BusIO_Register::read(uint8_t *value) {
|
|
if (!read(_buffer, 1)) {
|
|
return false;
|
|
}
|
|
|
|
*value = _buffer[0];
|
|
return true;
|
|
}
|
|
|
|
/*!
|
|
* @brief Pretty printer for this register
|
|
* @param s The Stream to print to, defaults to &Serial
|
|
*/
|
|
void Adafruit_BusIO_Register::print(Stream *s) {
|
|
uint32_t val = read();
|
|
s->print("0x");
|
|
s->print(val, HEX);
|
|
}
|
|
|
|
/*!
|
|
* @brief Pretty printer for this register
|
|
* @param s The Stream to print to, defaults to &Serial
|
|
*/
|
|
void Adafruit_BusIO_Register::println(Stream *s) {
|
|
print(s);
|
|
s->println();
|
|
}
|
|
|
|
/*!
|
|
* @brief Create a slice of the register that we can address without
|
|
* touching other bits
|
|
* @param reg The Adafruit_BusIO_Register which defines the bus/register
|
|
* @param bits The number of bits wide we are slicing
|
|
* @param shift The number of bits that our bit-slice is shifted from LSB
|
|
*/
|
|
Adafruit_BusIO_RegisterBits::Adafruit_BusIO_RegisterBits(
|
|
Adafruit_BusIO_Register *reg, uint8_t bits, uint8_t shift) {
|
|
_register = reg;
|
|
_bits = bits;
|
|
_shift = shift;
|
|
}
|
|
|
|
/*!
|
|
* @brief Read 4 bytes of data from the register
|
|
* @return data The 4 bytes to read
|
|
*/
|
|
uint32_t Adafruit_BusIO_RegisterBits::read(void) {
|
|
uint32_t val = _register->read();
|
|
val >>= _shift;
|
|
return val & ((1 << (_bits)) - 1);
|
|
}
|
|
|
|
/*!
|
|
* @brief Write 4 bytes of data to the register
|
|
* @param data The 4 bytes to write
|
|
* @return True on successful write (only really useful for I2C as SPI is
|
|
* uncheckable)
|
|
*/
|
|
bool Adafruit_BusIO_RegisterBits::write(uint32_t data) {
|
|
uint32_t val = _register->read();
|
|
|
|
// mask off the data before writing
|
|
uint32_t mask = (1 << (_bits)) - 1;
|
|
data &= mask;
|
|
|
|
mask <<= _shift;
|
|
val &= ~mask; // remove the current data at that spot
|
|
val |= data << _shift; // and add in the new data
|
|
|
|
return _register->write(val, _register->width());
|
|
}
|
|
|
|
/*!
|
|
* @brief The width of the register data, helpful for doing calculations
|
|
* @returns The data width used when initializing the register
|
|
*/
|
|
uint8_t Adafruit_BusIO_Register::width(void) { return _width; }
|
|
|
|
/*!
|
|
* @brief Set the default width of data
|
|
* @param width the default width of data read from register
|
|
*/
|
|
void Adafruit_BusIO_Register::setWidth(uint8_t width) { _width = width; }
|
|
|
|
/*!
|
|
* @brief Set register address
|
|
* @param address the address from register
|
|
*/
|
|
void Adafruit_BusIO_Register::setAddress(uint16_t address) {
|
|
_address = address;
|
|
}
|
|
|
|
/*!
|
|
* @brief Set the width of register address
|
|
* @param address_width the width for register address
|
|
*/
|
|
void Adafruit_BusIO_Register::setAddressWidth(uint16_t address_width) {
|
|
_addrwidth = address_width;
|
|
}
|
|
|
|
#endif // SPI exists
|