mgeppert/Tasmota
1
0
Fork 0
Code Issues Pull Requests 1 Actions Packages Projects Releases Wiki Activity
5c19a01cec
Tasmota/tasmota/support_features.ino
Javier Arigita 31d0268df4 Heating controller added. Created by myself initially in LUA running as a Domoticz (running on a raspberry pi) script and controlling Qubino relays for floor heating. Ported to tasmota to get the logic within the relay itself and be less dependent on Domoticz. 
The controller supports several working modes. From off (no action) to manual (following input), automatic (hybrid, rampup or pi controller) and timeplan (automatic following predefined schedule with 3 temperatures for each weekday). It is fully configured via commands, it will include in the future diagnostics and will be extended to more outputs (will be tested on sonoff 4CH Pro).

The controller has been tested successfully with a Shelly 1PM device and works as the original LUA domoticz script.
2020-04-17 10:31:53 +02:00

590 lines
16 KiB
C++
Raw Blame History

/*
support_features.ino - feature support for Tasmota
Copyright (C) 2020 Theo Arends
This program is free software: you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation, either version 3 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
/*********************************************************************************************\
* Fill feature list
\*********************************************************************************************/
void GetFeatures(void)
{
feature_drv1 = 0x00000000;
#ifdef USE_ENERGY_MARGIN_DETECTION
feature_drv1 |= 0x00000001; // xdrv_03_energy.ino
#endif
#ifdef USE_LIGHT
feature_drv1 |= 0x00000002; // tasmota.ino, xdrv_04_light.ino
#endif
#ifdef USE_I2C
feature_drv1 |= 0x00000004; // tasmota.ino
#endif
#ifdef USE_SPI
feature_drv1 |= 0x00000008; // tasmota.ino
#endif
#ifdef USE_DISCOVERY
feature_drv1 |= 0x00000010; // tasmota.ino
#endif
#ifdef USE_ARDUINO_OTA
feature_drv1 |= 0x00000020; // tasmota.ino
#endif
#ifdef USE_MQTT_TLS
feature_drv1 |= 0x00000040; // xdrv_02_mqtt.ino
#endif
#ifdef USE_WEBSERVER
feature_drv1 |= 0x00000080; // xdrv_01_webserver.ino
#endif
#ifdef WEBSERVER_ADVERTISE
feature_drv1 |= 0x00000100; // xdrv_01_webserver.ino
#endif
#ifdef USE_EMULATION_HUE
feature_drv1 |= 0x00000200; // xdrv_20_hue.ino
#endif
//#if (MQTT_LIBRARY_TYPE == MQTT_PUBSUBCLIENT)
feature_drv1 |= 0x00000400; // xdrv_02_mqtt.ino
//#endif
//#if (MQTT_LIBRARY_TYPE == MQTT_TASMOTAMQTT)
// feature_drv1 |= 0x00000800; // xdrv_02_mqtt.ino
//#endif
//#if (MQTT_LIBRARY_TYPE == MQTT_ESPMQTTARDUINO) // Obsolete since 6.2.1.11
// feature_drv1 |= 0x00001000; // xdrv_02_mqtt.ino
//#endif
#ifdef MQTT_HOST_DISCOVERY
feature_drv1 |= 0x00002000; // xdrv_02_mqtt.ino
#endif
#ifdef USE_ARILUX_RF
feature_drv1 |= 0x00004000; // xdrv_04_light.ino
#endif
#if defined(USE_LIGHT) && defined(USE_WS2812)
feature_drv1 |= 0x00008000; // xdrv_04_light.ino
#endif
#ifdef USE_WS2812_DMA
feature_drv1 |= 0x00010000; // xdrv_04_light.ino
#endif
#if defined(USE_IR_REMOTE) || defined(USE_IR_REMOTE_FULL)
feature_drv1 |= 0x00020000; // xdrv_05_irremote.ino
#endif
#ifdef USE_IR_HVAC
feature_drv1 |= 0x00040000; // xdrv_05_irremote.ino
#endif
#ifdef USE_IR_RECEIVE
feature_drv1 |= 0x00080000; // xdrv_05_irremote.ino
#endif
#ifdef USE_DOMOTICZ
feature_drv1 |= 0x00100000; // xdrv_07_domoticz.ino
#endif
#ifdef USE_DISPLAY
feature_drv1 |= 0x00200000; // xdrv_13_display.ino
#endif
#ifdef USE_HOME_ASSISTANT
feature_drv1 |= 0x00400000; // xdrv_12_home_assistant.ino
#endif
#ifdef USE_SERIAL_BRIDGE
feature_drv1 |= 0x00800000; // xdrv_08_serial_bridge.ino
#endif
#ifdef USE_TIMERS
feature_drv1 |= 0x01000000; // xdrv_09_timers.ino
#endif
#ifdef USE_SUNRISE
feature_drv1 |= 0x02000000; // xdrv_09_timers.ino
#endif
#ifdef USE_TIMERS_WEB
feature_drv1 |= 0x04000000; // xdrv_09_timers.ino
#endif
#ifdef USE_RULES
feature_drv1 |= 0x08000000; // xdrv_10_rules.ino
#endif
#ifdef USE_KNX
feature_drv1 |= 0x10000000; // xdrv_11_knx.ino
#endif
#ifdef USE_WPS
feature_drv1 |= 0x20000000; // support.ino - removed with version 6.6.0.21
#endif
#ifdef USE_SMARTCONFIG
feature_drv1 |= 0x40000000; // support.ino - removed with version 6.6.0.21
#endif
#ifdef USE_ENERGY_POWER_LIMIT
feature_drv1 |= 0x80000000; // xdrv_03_energy.ino
#endif
/*********************************************************************************************/
feature_drv2 = 0x00000000;
#ifdef USE_CONFIG_OVERRIDE
feature_drv2 |= 0x00000001; // user_config(_override).h
#endif
#ifdef FIRMWARE_MINIMAL
feature_drv2 |= 0x00000002; // user_config(_override).h
#endif
#ifdef FIRMWARE_SENSORS
feature_drv2 |= 0x00000004; // user_config(_override).h
#endif
#ifdef FIRMWARE_CLASSIC
feature_drv2 |= 0x00000008; // user_config(_override).h
#endif
#ifdef FIRMWARE_KNX_NO_EMULATION
feature_drv2 |= 0x00000010; // user_config(_override).h
#endif
#ifdef USE_DISPLAY_MODES1TO5
feature_drv2 |= 0x00000020; // xdrv_13_display.ino
#endif
#ifdef USE_DISPLAY_GRAPH
feature_drv2 |= 0x00000040; // xdrv_13_display.ino
#endif
#ifdef USE_DISPLAY_LCD
feature_drv2 |= 0x00000080; // xdsp_01_lcd.ino
#endif
#ifdef USE_DISPLAY_SSD1306
feature_drv2 |= 0x00000100; // xdsp_02_ssd1306.ino
#endif
#ifdef USE_DISPLAY_MATRIX
feature_drv2 |= 0x00000200; // xdsp_03_matrix.ino
#endif
#ifdef USE_DISPLAY_ILI9341
feature_drv2 |= 0x00000400; // xdsp_04_ili9341.ino
#endif
#ifdef USE_DISPLAY_EPAPER_29
feature_drv2 |= 0x00000800; // xdsp_05_epaper.ino
#endif
#ifdef USE_DISPLAY_SH1106
feature_drv2 |= 0x00001000; // xdsp_06_sh1106.ino
#endif
#ifdef USE_MP3_PLAYER
feature_drv2 |= 0x00002000; // xdrv_14_mp3.ino
#endif
#ifdef USE_PCA9685
feature_drv2 |= 0x00004000; // xdrv_15_pca9685.ino
#endif
#if defined(USE_LIGHT) && defined(USE_TUYA_MCU)
feature_drv2 |= 0x00008000; // xdrv_16_tuyadimmer.ino
#endif
#ifdef USE_RC_SWITCH
feature_drv2 |= 0x00010000; // xdrv_17_rcswitch.ino
#endif
#if defined(USE_LIGHT) && defined(USE_ARMTRONIX_DIMMERS)
feature_drv2 |= 0x00020000; // xdrv_18_armtronixdimmer.ino
#endif
#if defined(USE_LIGHT) && defined(USE_SM16716)
feature_drv2 |= 0x00040000; // xdrv_04_light.ino
#endif
#ifdef USE_SCRIPT
feature_drv2 |= 0x00080000; // xdrv_10_scripter.ino
#endif
#ifdef USE_EMULATION_WEMO
feature_drv2 |= 0x00100000; // xdrv_21_wemo.ino
#endif
#ifdef USE_SONOFF_IFAN
feature_drv2 |= 0x00200000; // xdrv_22_sonoff_ifan.ino
#endif
#ifdef USE_ZIGBEE
feature_drv2 |= 0x00400000; // xdrv_23_zigbee.ino
#endif
#ifdef NO_EXTRA_4K_HEAP
feature_drv2 |= 0x00800000; // sonoff_post.h
#endif
#ifdef VTABLES_IN_IRAM
feature_drv2 |= 0x01000000; // platformio.ini
#endif
#ifdef VTABLES_IN_DRAM
feature_drv2 |= 0x02000000; // platformio.ini
#endif
#ifdef VTABLES_IN_FLASH
feature_drv2 |= 0x04000000; // platformio.ini
#endif
#ifdef PIO_FRAMEWORK_ARDUINO_LWIP_HIGHER_BANDWIDTH
feature_drv2 |= 0x08000000; // platformio.ini
#endif
#ifdef PIO_FRAMEWORK_ARDUINO_LWIP2_LOW_MEMORY
feature_drv2 |= 0x10000000; // platformio.ini
#endif
#ifdef PIO_FRAMEWORK_ARDUINO_LWIP2_HIGHER_BANDWIDTH
feature_drv2 |= 0x20000000; // platformio.ini
#endif
#ifdef DEBUG_THEO
feature_drv2 |= 0x40000000; // xdrv_99_debug.ino
#endif
#ifdef USE_DEBUG_DRIVER
feature_drv2 |= 0x80000000; // xdrv_99_debug.ino
#endif
/*********************************************************************************************/
feature_sns1 = 0x00000000;
#ifdef USE_COUNTER
feature_sns1 |= 0x00000001; // xsns_01_counter.ino
#endif
#ifdef USE_ADC_VCC
feature_sns1 |= 0x00000002; // xsns_02_analog.ino
#endif
#ifdef USE_ENERGY_SENSOR
feature_sns1 |= 0x00000004; // xdrv_03_energy.ino
#endif
#ifdef USE_PZEM004T
feature_sns1 |= 0x00000008; // xnrg_03_pzem004t.ino
#endif
#ifdef USE_DS18B20
feature_sns1 |= 0x00000010; // xsns_05_ds18b20.ino - no more support since 6.6.0.18
#endif
#ifdef USE_DS18x20_LEGACY
feature_sns1 |= 0x00000020; // xsns_05_ds18x20_legacy.ino - no more support since 6.6.0.14
#endif
#ifdef USE_DS18x20
feature_sns1 |= 0x00000040; // xsns_05_ds18x20.ino
#endif
#ifdef USE_DHT
feature_sns1 |= 0x00000080; // xsns_06_dht.ino
#endif
#ifdef USE_SHT
feature_sns1 |= 0x00000100; // xsns_07_sht1x.ino
#endif
#ifdef USE_HTU
feature_sns1 |= 0x00000200; // xsns_08_htu21.ino
#endif
#ifdef USE_BMP
feature_sns1 |= 0x00000400; // xsns_09_bmp.ino
#endif
#ifdef USE_BME680
feature_sns1 |= 0x00000800; // xsns_09_bmp.ino - BME680
#endif
#ifdef USE_BH1750
feature_sns1 |= 0x00001000; // xsns_10_bh1750.ino
#endif
#ifdef USE_VEML6070
feature_sns1 |= 0x00002000; // xsns_11_veml6070.ino
#endif
#ifdef USE_ADS1115_I2CDEV
feature_sns1 |= 0x00004000; // xsns_12_ads1115_i2cdev.ino
#endif
#ifdef USE_ADS1115
feature_sns1 |= 0x00008000; // xsns_12_ads1115.ino
#endif
#ifdef USE_INA219
feature_sns1 |= 0x00010000; // xsns_13_ina219.ino
#endif
#ifdef USE_SHT3X
feature_sns1 |= 0x00020000; // xsns_14_sht3x.ino
#endif
#ifdef USE_MHZ19
feature_sns1 |= 0x00040000; // xsns_15_mhz19.ino
#endif
#ifdef USE_TSL2561
feature_sns1 |= 0x00080000; // xsns_16_tsl2561.ino
#endif
#ifdef USE_SENSEAIR
feature_sns1 |= 0x00100000; // xsns_17_senseair.ino
#endif
#ifdef USE_PMS5003
feature_sns1 |= 0x00200000; // xsns_18_pms5003.ino
#endif
#ifdef USE_MGS
feature_sns1 |= 0x00400000; // xsns_19_mgs.ino
#endif
#ifdef USE_NOVA_SDS
feature_sns1 |= 0x00800000; // xsns_20_novasds.ino
#endif
#ifdef USE_SGP30
feature_sns1 |= 0x01000000; // xsns_21_sgp30.ino
#endif
#ifdef USE_SR04
feature_sns1 |= 0x02000000; // xsns_22_sr04.ino
#endif
#ifdef USE_SDM120
feature_sns1 |= 0x04000000; // xnrg_08_sdm120.ino
#endif
#ifdef USE_SI1145
feature_sns1 |= 0x08000000; // xsns_24_si1145.ino
#endif
#ifdef USE_SDM630
feature_sns1 |= 0x10000000; // xnrg_10_sdm630.ino
#endif
#ifdef USE_LM75AD
feature_sns1 |= 0x20000000; // xsns_26_lm75ad.ino
#endif
#ifdef USE_APDS9960
feature_sns1 |= 0x40000000; // xsns_27_apds9960.ino
#endif
#ifdef USE_TM1638
feature_sns1 |= 0x80000000; // xsns_28_tm1638.ino
#endif
/*********************************************************************************************/
feature_sns2 = 0x00000000;
#ifdef USE_MCP230xx
feature_sns2 |= 0x00000001; // xsns_29_mcp230xx.ino
#endif
#ifdef USE_MPR121
feature_sns2 |= 0x00000002; // xsns_30_mpr121.ino
#endif
#ifdef USE_CCS811
feature_sns2 |= 0x00000004; // xsns_31_ccs811.ino
#endif
#ifdef USE_MPU6050
feature_sns2 |= 0x00000008; // xsns_32_mpu6050.ino
#endif
#ifdef USE_MCP230xx_OUTPUT
feature_sns2 |= 0x00000010; // xsns_29_mcp230xx.ino
#endif
#ifdef USE_MCP230xx_DISPLAYOUTPUT
feature_sns2 |= 0x00000020; // xsns_29_mcp230xx.ino
#endif
#ifdef USE_HLW8012
feature_sns2 |= 0x00000040; // xnrg_01_hlw8012.ino
#endif
#ifdef USE_CSE7766
feature_sns2 |= 0x00000080; // xnrg_02_cse7766.ino
#endif
#ifdef USE_MCP39F501
feature_sns2 |= 0x00000100; // xnrg_04_mcp39f501.ino
#endif
#ifdef USE_PZEM_AC
feature_sns2 |= 0x00000200; // xnrg_05_pzem_ac.ino
#endif
#ifdef USE_DS3231
feature_sns2 |= 0x00000400; // xsns_33_ds3231.ino
#endif
#ifdef USE_HX711
feature_sns2 |= 0x00000800; // xsns_34_hx711.ino
#endif
#ifdef USE_PZEM_DC
feature_sns2 |= 0x00001000; // xnrg_06_pzem_dc.ino
#endif
#if defined(USE_TX20_WIND_SENSOR) || defined(USE_TX23_WIND_SENSOR)
feature_sns2 |= 0x00002000; // xsns_35_tx20.ino
#endif
#ifdef USE_MGC3130
feature_sns2 |= 0x00004000; // xsns_36_mgc3130.ino
#endif
#ifdef USE_RF_SENSOR
feature_sns2 |= 0x00008000; // xsns_37_rfsensor.ino
#endif
#ifdef USE_THEO_V2
feature_sns2 |= 0x00010000; // xsns_37_rfsensor.ino
#endif
#ifdef USE_ALECTO_V2
feature_sns2 |= 0x00020000; // xsns_37_rfsensor.ino
#endif
#ifdef USE_AZ7798
feature_sns2 |= 0x00040000; // xsns_38_az7798.ino
#endif
#ifdef USE_MAX31855
feature_sns2 |= 0x00080000; // xsns_39_max31855.ino
#endif
#ifdef USE_PN532_HSU
feature_sns2 |= 0x00100000; // xsns_40_pn532.ino
#endif
#ifdef USE_MAX44009
feature_sns2 |= 0x00200000; // xsns_41_max44009.ino
#endif
#ifdef USE_SCD30
feature_sns2 |= 0x00400000; // xsns_42_scd30.ino
#endif
#ifdef USE_HRE
feature_sns2 |= 0x00800000; // xsns_43_hre.ino
#endif
#ifdef USE_ADE7953
feature_sns2 |= 0x01000000; // xnrg_07_ade7953.ino
#endif
#ifdef USE_SPS30
feature_sns2 |= 0x02000000; // xsns_44_sps30.ino
#endif
#ifdef USE_VL53L0X
feature_sns2 |= 0x04000000; // xsns_45_vl53l0x.ino
#endif
#ifdef USE_MLX90614
feature_sns2 |= 0x08000000; // xsns_46_MLX90614.ino
#endif
#ifdef USE_MAX31865
feature_sns2 |= 0x10000000; // xsns_47-max31865.ino
#endif
#ifdef USE_CHIRP
feature_sns2 |= 0x20000000; // xsns_48_chirp.ino
#endif
#ifdef USE_SOLAX_X1
feature_sns2 |= 0x40000000; // xnrg_12_solaxX1.ino
#endif
#ifdef USE_PAJ7620
feature_sns2 |= 0x80000000; // xsns_50_paj7620.ino
#endif
/*********************************************************************************************/
feature5 = 0x00000000;
#ifdef USE_BUZZER
feature5 |= 0x00000001; // xdrv_24_buzzer.ino
#endif
#ifdef USE_RDM6300
feature5 |= 0x00000002; // xsns_51_rdm6300.ino
#endif
#ifdef USE_IBEACON
feature5 |= 0x00000004; // xsns_52_ibeacon.ino
#endif
#ifdef USE_SML_M
feature5 |= 0x00000008; // xsns_53_sml.ino
#endif
#ifdef USE_INA226
feature5 |= 0x00000010; // xsns_54_ina226.ino
#endif
#ifdef USE_A4988_STEPPER
feature5 |= 0x00000020; // xdrv_25_A4988.ino
#endif
#ifdef USE_DDS2382
feature5 |= 0x00000040; // xnrg_09_dds2382.ino
#endif
#ifdef USE_SM2135
feature5 |= 0x00000080; // xdrv_026_sm2135.ino
#endif
#ifdef USE_SHUTTER
feature5 |= 0x00000100; // xdrv_027_shutter.ino
#endif
#ifdef USE_PCF8574
feature5 |= 0x00000200; // xdrv_028_pcf8574.ino
#endif
#ifdef USE_DDSU666
feature5 |= 0x00000400; // xnrg_11_ddsu666.ino
#endif
#ifdef USE_DEEPSLEEP
feature5 |= 0x00000800; // xdrv_029_deepsleep.ino
#endif
#ifdef USE_SONOFF_SC
feature5 |= 0x00001000; // xsns_04_snfsc.ino
#endif
#ifdef USE_SONOFF_RF
feature5 |= 0x00002000; // xdrv_06_snfbridge.ino
#endif
#ifdef USE_SONOFF_L1
feature5 |= 0x00004000; // xlgt_05_sonoff_l1.ino
#endif
#ifdef USE_EXS_DIMMER
feature5 |= 0x00008000; // xdrv_30_exs_dimmer.ino
#endif
#ifdef USE_ARDUINO_SLAVE
feature5 |= 0x00010000; // xdrv_31_arduino_slave.ino
#endif
#ifdef USE_HIH6
feature5 |= 0x00020000; // xsns_55_hih_series.ino
#endif
#ifdef USE_HPMA
feature5 |= 0x00040000; // xsns_56_hpma.ino
#endif
#ifdef USE_TSL2591
feature5 |= 0x00080000; // xsns_57_tsl2591.ino
#endif
#ifdef USE_DHT12
feature5 |= 0x00100000; // xsns_58_dht12.ino
#endif
#ifdef USE_DS1624
feature5 |= 0x00200000; // xsns_59_ds1624.ino
#endif
#ifdef USE_GPS
feature5 |= 0x00400000; // xsns_60_GPS.ino
#endif
#ifdef USE_HOTPLUG
feature5 |= 0x00800000; // xdrv_32_hotplug.ino
#endif
#ifdef USE_NRF24
feature5 |= 0x01000000; // xsns_33_nrf24l01.ino
#endif
#ifdef USE_MIBLE
feature5 |= 0x02000000; // xsns_61_MI_BLE.ino
#endif
#ifdef USE_HM10
feature5 |= 0x04000000; // xsns_62_MI_HM10.ino
#endif
#ifdef USE_LE01MR
feature5 |= 0x08000000; // xnrg_13_fif_le01mr.ino
#endif
#ifdef USE_AHT1x
feature5 |= 0x10000000; // xsns_63_aht1x.ino
#endif
#ifdef USE_WEMOS_MOTOR_V1
feature5 |= 0x20000000; // xdrv_34_wemos_motor_v1.ino
#endif
#ifdef USE_DEVICE_GROUPS
feature5 |= 0x40000000; // support_device_groups.ino
#endif
#ifdef USE_PWM_DIMMER
feature5 |= 0x80000000; // xdrv_35_pwm_dimmer
#endif
/*********************************************************************************************/
feature6 = 0x00000000;
#ifdef USE_KEELOQ
feature6 |= 0x00000001; // xdrv_36_keeloq.ino
#endif
#ifdef USE_HRXL
feature6 |= 0x00000002; // xsns_64_hrxl.ino
#endif
#ifdef USE_SONOFF_D1
feature6 |= 0x00000004; // xdrv_37_sonoff_d1.ino
#endif
#ifdef USE_HDC1080
feature6 |= 0x00000008; // xsns_65_hdc1080.ino
#endif
#ifdef USE_IAQ
feature6 |= 0x00000010; // xsns_66_iAQ.ino
#endif
#ifdef USE_DISPLAY_SEVENSEG
feature6 |= 0x00000020; // xdsp_11_sevenseg.ino
#endif
#ifdef USE_AS3935
feature6 |= 0x00000040; // xsns_67_as3935.ino
#endif
#ifdef USE_PING
feature6 |= 0x00000080; // xdrv_38_ping.ino
#endif
#ifdef USE_HEATING
feature6 |= 0x00000100; // xdrv_39_heating.ino
#endif
// feature6 |= 0x00000200;
// feature6 |= 0x00000400;
// feature6 |= 0x00000800;
// feature6 |= 0x00001000;
// feature6 |= 0x00002000;
// feature6 |= 0x00004000;
// feature6 |= 0x00008000;
// feature6 |= 0x00010000;
// feature6 |= 0x00020000;
// feature6 |= 0x00040000;
// feature6 |= 0x00080000;
// feature6 |= 0x00100000;
// feature6 |= 0x00200000;
// feature6 |= 0x00400000;
// feature6 |= 0x00800000;
// feature6 |= 0x01000000;
// feature6 |= 0x02000000;
// feature6 |= 0x04000000;
// feature6 |= 0x08000000;
// feature6 |= 0x10000000;
// feature6 |= 0x20000000;
// feature6 |= 0x40000000;
// feature6 |= 0x80000000;
}
Reference in New Issue View Git Blame Copy Permalink