31d0268df4
The controller supports several working modes. From off (no action) to manual (following input), automatic (hybrid, rampup or pi controller) and timeplan (automatic following predefined schedule with 3 temperatures for each weekday). It is fully configured via commands, it will include in the future diagnostics and will be extended to more outputs (will be tested on sonoff 4CH Pro). The controller has been tested successfully with a Shelly 1PM device and works as the original LUA domoticz script.
351 lines
22 KiB
C
351 lines
22 KiB
C
/*
|
|
tasmota.h - Master header file for Tasmota
|
|
|
|
Copyright (C) 2020 Theo Arends
|
|
|
|
This program is free software: you can redistribute it and/or modify
|
|
it under the terms of the GNU General Public License as published by
|
|
the Free Software Foundation, either version 3 of the License, or
|
|
(at your option) any later version.
|
|
|
|
This program is distributed in the hope that it will be useful,
|
|
but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
GNU General Public License for more details.
|
|
|
|
You should have received a copy of the GNU General Public License
|
|
along with this program. If not, see <http://www.gnu.org/licenses/>.
|
|
*/
|
|
|
|
#ifndef _TASMOTA_H_
|
|
#define _TASMOTA_H_
|
|
|
|
/*********************************************************************************************\
|
|
* Performance ROM (PROGMEM) vs RAM (RODATA)
|
|
\*********************************************************************************************/
|
|
|
|
#define XFUNC_PTR_IN_ROM // Enable for keeping tables in ROM (PROGMEM) which seem to have access issues on some flash types
|
|
|
|
/*********************************************************************************************\
|
|
* Default sensor states
|
|
\*********************************************************************************************/
|
|
|
|
#define CODE_IMAGE_STR "tasmota"
|
|
|
|
#define USE_LIGHT // Enable light control
|
|
#define USE_ENERGY_SENSOR // Use energy sensors (+14k code)
|
|
#define USE_HLW8012 // Use energy sensor for Sonoff Pow and WolfBlitz
|
|
#define USE_CSE7766 // Use energy sensor for Sonoff S31 and Pow R2
|
|
|
|
/*********************************************************************************************\
|
|
* Power Type
|
|
\*********************************************************************************************/
|
|
|
|
//#ifdef ESP8266
|
|
typedef unsigned long power_t; // Power (Relay) type
|
|
const uint32_t POWER_MASK = 0xffffffffUL; // Power (Relay) full mask
|
|
//#endif // ESP8266
|
|
//#ifdef ESP32
|
|
//typedef uint64_t power_t; // Power (Relay) type
|
|
//const uint64_t POWER_MASK = 0xffffffffffffffffull; // Power (Relay) full mask
|
|
//#endif // ESP32
|
|
|
|
/*********************************************************************************************\
|
|
* Constants
|
|
\*********************************************************************************************/
|
|
|
|
// Changes to the following MAX_ defines will impact settings layout
|
|
const uint8_t MAX_SWITCHES = 8; // Max number of switches
|
|
const uint8_t MAX_RELAYS = 8; // Max number of relays
|
|
const uint8_t MAX_INTERLOCKS = 4; // Max number of interlock groups (MAX_RELAYS / 2)
|
|
const uint8_t MAX_LEDS = 4; // Max number of leds
|
|
const uint8_t MAX_KEYS = 4; // Max number of keys or buttons
|
|
const uint8_t MAX_PWMS = 5; // Max number of PWM channels
|
|
const uint8_t MAX_COUNTERS = 4; // Max number of counter sensors
|
|
const uint8_t MAX_TIMERS = 16; // Max number of Timers
|
|
const uint8_t MAX_PULSETIMERS = 8; // Max number of supported pulse timers
|
|
const uint8_t MAX_DOMOTICZ_IDX = 4; // Max number of Domoticz device, key and switch indices
|
|
const uint8_t MAX_DOMOTICZ_SNS_IDX = 12; // Max number of Domoticz sensors indices
|
|
const uint8_t MAX_KNX_GA = 10; // Max number of KNX Group Addresses to read that can be set
|
|
const uint8_t MAX_KNX_CB = 10; // Max number of KNX Group Addresses to write that can be set
|
|
const uint8_t MAX_XNRG_DRIVERS = 32; // Max number of allowed energy drivers
|
|
const uint8_t MAX_XDSP_DRIVERS = 32; // Max number of allowed display drivers
|
|
const uint8_t MAX_XDRV_DRIVERS = 96; // Max number of allowed driver drivers
|
|
const uint8_t MAX_XSNS_DRIVERS = 96; // Max number of allowed sensor drivers
|
|
const uint8_t MAX_I2C_DRIVERS = 96; // Max number of allowed i2c drivers
|
|
const uint8_t MAX_SHUTTERS = 4; // Max number of shutters
|
|
const uint8_t MAX_PCF8574 = 8; // Max number of PCF8574 devices
|
|
const uint8_t MAX_RULE_SETS = 3; // Max number of rule sets of size 512 characters
|
|
const uint16_t MAX_RULE_SIZE = 512; // Max number of characters in rules
|
|
|
|
// Changes to the following MAX_ defines need to be in line with enum SettingsTextIndex
|
|
const uint8_t MAX_MQTT_PREFIXES = 3; // Max number of MQTT prefixes (cmnd, stat, tele)
|
|
const uint8_t MAX_SSIDS = 2; // Max number of SSIDs
|
|
const uint8_t MAX_STATE_TEXT = 4; // Max number of State names (OFF, ON, TOGGLE, HOLD)
|
|
const uint8_t MAX_NTP_SERVERS = 3; // Max number of NTP servers
|
|
const uint8_t MAX_RULE_MEMS = 16; // Max number of saved vars
|
|
const uint8_t MAX_FRIENDLYNAMES = 8; // Max number of Friendly names
|
|
const uint8_t MAX_BUTTON_TEXT = 16; // Max number of GUI button labels
|
|
const uint8_t MAX_GROUP_TOPICS = 4; // Max number of Group Topics
|
|
const uint8_t MAX_DEV_GROUP_NAMES = 4; // Max number of Device Group names
|
|
|
|
const uint8_t MAX_HUE_DEVICES = 15; // Max number of Philips Hue device per emulation
|
|
|
|
const char MQTT_TOKEN_PREFIX[] PROGMEM = "%prefix%"; // To be substituted by mqtt_prefix[x]
|
|
const char MQTT_TOKEN_TOPIC[] PROGMEM = "%topic%"; // To be substituted by mqtt_topic, mqtt_grptopic, mqtt_buttontopic, mqtt_switchtopic
|
|
const char WIFI_HOSTNAME[] = "%s-%04d"; // Expands to <MQTT_TOPIC>-<last 4 decimal chars of MAC address>
|
|
|
|
const uint8_t CONFIG_FILE_SIGN = 0xA5; // Configuration file signature
|
|
const uint8_t CONFIG_FILE_XOR = 0x5A; // Configuration file xor (0 = No Xor)
|
|
|
|
const uint32_t HLW_PREF_PULSE = 12530; // was 4975us = 201Hz = 1000W
|
|
const uint32_t HLW_UREF_PULSE = 1950; // was 1666us = 600Hz = 220V
|
|
const uint32_t HLW_IREF_PULSE = 3500; // was 1666us = 600Hz = 4.545A
|
|
|
|
const uint8_t MQTT_RETRY_SECS = 10; // Minimum seconds to retry MQTT connection
|
|
const uint32_t GLOBAL_VALUES_VALID = 300; // Max number of seconds to keep last received values
|
|
const power_t APP_POWER = 0; // Default saved power state Off
|
|
const uint16_t WS2812_MAX_LEDS = 512; // Max number of LEDs
|
|
|
|
const uint32_t PWM_RANGE = 1023; // 255..1023 needs to be devisible by 256
|
|
//const uint16_t PWM_FREQ = 1000; // 100..1000 Hz led refresh
|
|
//const uint16_t PWM_FREQ = 910; // 100..1000 Hz led refresh (iTead value)
|
|
const uint16_t PWM_FREQ = 880; // 100..1000 Hz led refresh (BN-SZ01 value)
|
|
const uint16_t PWM_MAX = 4000; // [PWM_MAX] Maximum frequency - Default: 4000
|
|
const uint16_t PWM_MIN = 100; // [PWM_MIN] Minimum frequency - Default: 100
|
|
// For Dimmers use double of your mains AC frequecy (100 for 50Hz and 120 for 60Hz)
|
|
// For Controlling Servos use 50 and also set PWM_FREQ as 50 (DO NOT USE THESE VALUES FOR DIMMERS)
|
|
|
|
const uint16_t MAX_POWER_HOLD = 10; // Time in SECONDS to allow max agreed power
|
|
const uint16_t MAX_POWER_WINDOW = 30; // Time in SECONDS to disable allow max agreed power
|
|
const uint16_t SAFE_POWER_HOLD = 10; // Time in SECONDS to allow max unit safe power
|
|
const uint16_t SAFE_POWER_WINDOW = 30; // Time in MINUTES to disable allow max unit safe power
|
|
const uint8_t MAX_POWER_RETRY = 5; // Retry count allowing agreed power limit overflow
|
|
|
|
const uint8_t STATES = 20; // Number of states per second using 50 mSec interval
|
|
const uint8_t IMMINENT_RESET_FACTOR = 10; // Factor to extent button hold time for imminent Reset to default 40 seconds using KEY_HOLD_TIME of 40
|
|
const uint32_t BOOT_LOOP_TIME = 10; // Number of seconds to stop detecting boot loops
|
|
const uint32_t POWER_CYCLE_TIME = 8; // Number of seconds to reset power cycle boot loops
|
|
const uint16_t SYSLOG_TIMER = 600; // Seconds to restore syslog_level
|
|
const uint16_t SERIALLOG_TIMER = 600; // Seconds to disable SerialLog
|
|
const uint8_t OTA_ATTEMPTS = 5; // Number of times to try fetching the new firmware
|
|
|
|
const uint16_t INPUT_BUFFER_SIZE = 520; // Max number of characters in (serial and http) command buffer
|
|
const uint16_t FLOATSZ = 16; // Max number of characters in float result from dtostrfd (max 32)
|
|
const uint16_t CMDSZ = 24; // Max number of characters in command
|
|
const uint16_t TOPSZ = 151; // Max number of characters in topic string
|
|
const uint16_t LOGSZ = 700; // Max number of characters in log
|
|
const uint16_t MIN_MESSZ = 1040; // Min number of characters in MQTT message (1000 - TOPSZ - 9 header bytes)
|
|
|
|
const uint8_t SENSOR_MAX_MISS = 5; // Max number of missed sensor reads before deciding it's offline
|
|
|
|
const uint8_t MAX_BACKLOG = 30; // Max number of commands in backlog
|
|
const uint32_t MIN_BACKLOG_DELAY = 200; // Minimal backlog delay in mSeconds
|
|
|
|
const uint32_t SOFT_BAUDRATE = 9600; // Default software serial baudrate
|
|
const uint32_t APP_BAUDRATE = 115200; // Default serial baudrate
|
|
const uint32_t SERIAL_POLLING = 100; // Serial receive polling in ms
|
|
const uint32_t ZIGBEE_POLLING = 100; // Serial receive polling in ms
|
|
const uint8_t MAX_STATUS = 12; // Max number of status lines
|
|
|
|
const uint32_t START_VALID_TIME = 1451602800; // Time is synced and after 2016-01-01
|
|
|
|
const uint32_t DRIVER_BOOT_DELAY = 1; // Number of milliseconds to retard driver cycles during boot-up time to reduce overall CPU load whilst Wifi is connecting
|
|
const uint32_t LOOP_SLEEP_DELAY = 50; // Lowest number of milliseconds to go through the main loop using delay when needed
|
|
|
|
/*********************************************************************************************\
|
|
* Defines
|
|
\*********************************************************************************************/
|
|
|
|
#define MAX_RULE_TIMERS 8 // Max number of rule timers (4 bytes / timer)
|
|
#define MAX_RULE_VARS 16 // Max number of rule variables (33 bytes / variable)
|
|
|
|
//enum ws2812NeopixelbusFeature { NEO_RGB, NEO_GRB, NEO_BRG, NEO_RBG, NEO_3LED, NEO_RGBW, NEO_GRBW }; // Doesn't work
|
|
#define NEO_RGB 0 // Neopixel RGB leds
|
|
#define NEO_GRB 1 // Neopixel GRB leds
|
|
#define NEO_BRG 2 // Neopixel BRG leds
|
|
#define NEO_RBG 3 // Neopixel RBG leds
|
|
#define NEO_3LED 4 // Placeholder to test for 4 led types
|
|
#define NEO_RGBW 5 // Neopixel RGBW leds
|
|
#define NEO_GRBW 6 // Neopixel GRBW leds
|
|
|
|
#define RGB_REMAP_RGBW 0
|
|
#define RGB_REMAP_RBGW 6
|
|
#define RGB_REMAP_GRBW 24
|
|
#define RGB_REMAP_GBRW 30
|
|
#define RGB_REMAP_BRGW 48
|
|
#define RGB_REMAP_BGRW 54
|
|
|
|
#define NEO_HW_WS2812 0 // NeoPixelBus hardware WS2812
|
|
#define NEO_HW_WS2812X 1 // NeoPixelBus hardware WS2812x like WS2812b
|
|
#define NEO_HW_WS2813 1 // NeoPixelBus hardware WS2813
|
|
#define NEO_HW_SK6812 2 // NeoPixelBus hardware SK6812
|
|
#define NEO_HW_LC8812 2 // NeoPixelBus hardware LC8812
|
|
#define NEO_HW_APA106 3 // NeoPixelBus hardware APA106
|
|
|
|
#define MQTT_PUBSUBCLIENT 1 // Mqtt PubSubClient library
|
|
#define MQTT_TASMOTAMQTT 2 // Mqtt TasmotaMqtt library based on esp-mqtt-arduino - soon obsolete
|
|
#define MQTT_ESPMQTTARDUINO 3 // Mqtt esp-mqtt-arduino library by Ingo Randolf - obsolete but define is present for debugging purposes
|
|
#define MQTT_ARDUINOMQTT 4 // Mqtt arduino-mqtt library by Joel Gaehwiler (https://github.com/256dpi/arduino-mqtt)
|
|
|
|
// Sunrise and Sunset DawnType
|
|
#define DAWN_NORMAL -0.8333
|
|
#define DAWN_CIVIL -6.0
|
|
#define DAWN_NAUTIC -12.0
|
|
#define DAWN_ASTRONOMIC -18.0
|
|
|
|
// Sensor and Commands definition for KNX Driver
|
|
#define KNX_TEMPERATURE 17
|
|
#define KNX_HUMIDITY 18
|
|
#define KNX_ENERGY_VOLTAGE 19
|
|
#define KNX_ENERGY_CURRENT 20
|
|
#define KNX_ENERGY_POWER 21
|
|
#define KNX_ENERGY_POWERFACTOR 22
|
|
#define KNX_ENERGY_DAILY 23
|
|
#define KNX_ENERGY_START 24
|
|
#define KNX_ENERGY_TOTAL 25
|
|
#define KNX_SLOT1 26
|
|
#define KNX_SLOT2 27
|
|
#define KNX_SLOT3 28
|
|
#define KNX_SLOT4 29
|
|
#define KNX_SLOT5 30
|
|
#define KNX_MAX_device_param 30
|
|
#define MAX_KNXTX_CMNDS 5
|
|
|
|
/*********************************************************************************************\
|
|
* Enumeration
|
|
\*********************************************************************************************/
|
|
|
|
enum WeekInMonthOptions {Last, First, Second, Third, Fourth};
|
|
enum DayOfTheWeekOptions {Sun=1, Mon, Tue, Wed, Thu, Fri, Sat};
|
|
enum MonthNamesOptions {Jan=1, Feb, Mar, Apr, May, Jun, Jul, Aug, Sep, Oct, Nov, Dec};
|
|
enum HemisphereOptions {North, South};
|
|
enum GetDateAndTimeOptions { DT_LOCAL, DT_UTC, DT_LOCALNOTZ, DT_DST, DT_STD, DT_RESTART, DT_ENERGY, DT_BOOTCOUNT };
|
|
|
|
enum LoggingLevels {LOG_LEVEL_NONE, LOG_LEVEL_ERROR, LOG_LEVEL_INFO, LOG_LEVEL_DEBUG, LOG_LEVEL_DEBUG_MORE};
|
|
|
|
enum WifiConfigOptions {WIFI_RESTART, EX_WIFI_SMARTCONFIG, WIFI_MANAGER, EX_WIFI_WPSCONFIG, WIFI_RETRY, WIFI_WAIT, WIFI_SERIAL, WIFI_MANAGER_RESET_ONLY, MAX_WIFI_OPTION};
|
|
|
|
enum SwitchModeOptions {TOGGLE, FOLLOW, FOLLOW_INV, PUSHBUTTON, PUSHBUTTON_INV, PUSHBUTTONHOLD, PUSHBUTTONHOLD_INV, PUSHBUTTON_TOGGLE, TOGGLEMULTI,
|
|
FOLLOWMULTI, FOLLOWMULTI_INV, PUSHHOLDMULTI, PUSHHOLDMULTI_INV, PUSHON, PUSHON_INV, MAX_SWITCH_OPTION};
|
|
|
|
enum LedStateOptions {LED_OFF, LED_POWER, LED_MQTTSUB, LED_POWER_MQTTSUB, LED_MQTTPUB, LED_POWER_MQTTPUB, LED_MQTT, LED_POWER_MQTT, MAX_LED_OPTION};
|
|
|
|
enum EmulationOptions {EMUL_NONE, EMUL_WEMO, EMUL_HUE, EMUL_MAX};
|
|
|
|
enum TopicOptions { CMND, STAT, TELE, nu1, RESULT_OR_CMND, RESULT_OR_STAT, RESULT_OR_TELE };
|
|
|
|
enum ExecuteCommandPowerOptions { POWER_OFF, POWER_ON, POWER_TOGGLE, POWER_BLINK, POWER_BLINK_STOP,
|
|
POWER_OFF_NO_STATE = 8, POWER_ON_NO_STATE, POWER_TOGGLE_NO_STATE,
|
|
POWER_SHOW_STATE = 16 };
|
|
enum SendKeyPowerOptions { POWER_HOLD = 3, POWER_INCREMENT = 4, POWER_INV = 5, POWER_CLEAR = 6, CLEAR_RETAIN = 9 };
|
|
enum SendKeyOptions { KEY_BUTTON, KEY_SWITCH };
|
|
enum SendKeyMultiClick { SINGLE = 10, DOUBLE = 11, TRIPLE = 12, QUAD = 13, PENTA = 14};
|
|
|
|
enum PowerOnStateOptions { POWER_ALL_OFF, POWER_ALL_ON, POWER_ALL_SAVED_TOGGLE, POWER_ALL_SAVED, POWER_ALL_ALWAYS_ON, POWER_ALL_OFF_PULSETIME_ON };
|
|
|
|
enum ButtonStates { PRESSED, NOT_PRESSED };
|
|
|
|
enum Shortcuts { SC_CLEAR, SC_DEFAULT, SC_USER };
|
|
|
|
enum SettingsParamIndex { P_HOLD_TIME, P_MAX_POWER_RETRY, P_BACKLOG_DELAY, P_MDNS_DELAYED_START, P_BOOT_LOOP_OFFSET, P_RGB_REMAP, P_IR_UNKNOW_THRESHOLD, // SetOption32 .. SetOption38
|
|
P_CSE7766_INVALID_POWER, P_HOLD_IGNORE, P_ARP_GRATUITOUS, P_OVER_TEMP, // SetOption39 .. SetOption42
|
|
P_ex_DIMMER_MAX, P_ex_TUYA_VOLTAGE_ID, P_ex_TUYA_CURRENT_ID, P_ex_TUYA_POWER_ID, // SetOption43 .. SetOption46
|
|
P_ex_ENERGY_TARIFF1, P_ex_ENERGY_TARIFF2, // SetOption47 .. SetOption48
|
|
P_MAX_PARAM8 }; // Max is PARAM8_SIZE (18) - SetOption32 until SetOption49
|
|
|
|
enum DomoticzSensors {DZ_TEMP, DZ_TEMP_HUM, DZ_TEMP_HUM_BARO, DZ_POWER_ENERGY, DZ_ILLUMINANCE, DZ_COUNT, DZ_VOLTAGE, DZ_CURRENT,
|
|
DZ_AIRQUALITY, DZ_P1_SMART_METER, DZ_SHUTTER, DZ_MAX_SENSORS};
|
|
|
|
enum Ws2812ClockIndex { WS_SECOND, WS_MINUTE, WS_HOUR, WS_MARKER };
|
|
enum Ws2812Color { WS_RED, WS_GREEN, WS_BLUE };
|
|
|
|
enum LightSubtypes { LST_NONE, LST_SINGLE, LST_COLDWARM, LST_RGB, LST_RGBW, LST_RGBCW, LST_MAX=5 }; // Do not insert new fields
|
|
enum LightTypes { LT_BASIC, LT_PWM1, LT_PWM2, LT_PWM3, LT_PWM4, LT_PWM5, LT_PWM6, LT_PWM7,
|
|
LT_NU8, LT_SERIAL1, LT_SERIAL2, LT_RGB, LT_RGBW, LT_RGBWC, LT_NU14, LT_NU15 }; // Do not insert new fields
|
|
|
|
enum XsnsFunctions {FUNC_SETTINGS_OVERRIDE, FUNC_PIN_STATE, FUNC_MODULE_INIT, FUNC_PRE_INIT, FUNC_INIT,
|
|
FUNC_LOOP, FUNC_EVERY_50_MSECOND, FUNC_EVERY_100_MSECOND, FUNC_EVERY_200_MSECOND, FUNC_EVERY_250_MSECOND, FUNC_EVERY_SECOND,
|
|
FUNC_SAVE_AT_MIDNIGHT, FUNC_SAVE_BEFORE_RESTART,
|
|
FUNC_AFTER_TELEPERIOD, FUNC_JSON_APPEND, FUNC_WEB_SENSOR, FUNC_COMMAND, FUNC_COMMAND_SENSOR, FUNC_COMMAND_DRIVER,
|
|
FUNC_MQTT_SUBSCRIBE, FUNC_MQTT_INIT, FUNC_MQTT_DATA,
|
|
FUNC_SET_POWER, FUNC_SET_DEVICE_POWER, FUNC_SHOW_SENSOR, FUNC_ANY_KEY,
|
|
FUNC_ENERGY_EVERY_SECOND, FUNC_ENERGY_RESET,
|
|
FUNC_RULES_PROCESS, FUNC_SERIAL, FUNC_FREE_MEM, FUNC_BUTTON_PRESSED,
|
|
FUNC_WEB_ADD_BUTTON, FUNC_WEB_ADD_MAIN_BUTTON, FUNC_WEB_ADD_HANDLER, FUNC_SET_CHANNELS, FUNC_SET_SCHEME, FUNC_HOTPLUG_SCAN,
|
|
FUNC_DEVICE_GROUP_ITEM };
|
|
|
|
enum AddressConfigSteps { ADDR_IDLE, ADDR_RECEIVE, ADDR_SEND };
|
|
|
|
enum SettingsTextIndex { SET_OTAURL,
|
|
SET_MQTTPREFIX1, SET_MQTTPREFIX2, SET_MQTTPREFIX3,
|
|
SET_STASSID1, SET_STASSID2,
|
|
SET_STAPWD1, SET_STAPWD2,
|
|
SET_HOSTNAME, SET_SYSLOG_HOST,
|
|
SET_WEBPWD, SET_CORS,
|
|
SET_MQTT_HOST, SET_MQTT_CLIENT,
|
|
SET_MQTT_USER, SET_MQTT_PWD,
|
|
SET_MQTT_FULLTOPIC, SET_MQTT_TOPIC,
|
|
SET_MQTT_BUTTON_TOPIC, SET_MQTT_SWITCH_TOPIC, SET_MQTT_GRP_TOPIC,
|
|
SET_STATE_TXT1, SET_STATE_TXT2, SET_STATE_TXT3, SET_STATE_TXT4,
|
|
SET_NTPSERVER1, SET_NTPSERVER2, SET_NTPSERVER3,
|
|
SET_MEM1, SET_MEM2, SET_MEM3, SET_MEM4, SET_MEM5, SET_MEM6, SET_MEM7, SET_MEM8,
|
|
SET_MEM9, SET_MEM10, SET_MEM11, SET_MEM12, SET_MEM13, SET_MEM14, SET_MEM15, SET_MEM16,
|
|
SET_FRIENDLYNAME1, SET_FRIENDLYNAME2, SET_FRIENDLYNAME3, SET_FRIENDLYNAME4,
|
|
SET_FRIENDLYNAME5, SET_FRIENDLYNAME6, SET_FRIENDLYNAME7, SET_FRIENDLYNAME8,
|
|
SET_BUTTON1, SET_BUTTON2, SET_BUTTON3, SET_BUTTON4, SET_BUTTON5, SET_BUTTON6, SET_BUTTON7, SET_BUTTON8,
|
|
SET_BUTTON9, SET_BUTTON10, SET_BUTTON11, SET_BUTTON12, SET_BUTTON13, SET_BUTTON14, SET_BUTTON15, SET_BUTTON16,
|
|
SET_MQTT_GRP_TOPIC2, SET_MQTT_GRP_TOPIC3, SET_MQTT_GRP_TOPIC4,
|
|
SET_TEMPLATE_NAME,
|
|
SET_DEV_GROUP_NAME1, SET_DEV_GROUP_NAME2, SET_DEV_GROUP_NAME3, SET_DEV_GROUP_NAME4,
|
|
SET_MAX };
|
|
|
|
enum DevGroupMessageType { DGR_MSGTYP_FULL_STATUS, DGR_MSGTYP_PARTIAL_UPDATE, DGR_MSGTYP_UPDATE, DGR_MSGTYP_UPDATE_MORE_TO_COME, DGR_MSGTYP_UPDATE_DIRECT, DGR_MSGTYPE_UPDATE_COMMAND };
|
|
|
|
enum DevGroupMessageFlag { DGR_FLAG_RESET = 1, DGR_FLAG_STATUS_REQUEST = 2, DGR_FLAG_FULL_STATUS = 4, DGR_FLAG_ACK = 8, DGR_FLAG_MORE_TO_COME = 16, DGR_FLAG_DIRECT = 32, DGR_FLAG_ANNOUNCEMENT = 64 };
|
|
|
|
enum DevGroupItem { DGR_ITEM_EOL, DGR_ITEM_STATUS,
|
|
DGR_ITEM_LIGHT_FADE, DGR_ITEM_LIGHT_SPEED, DGR_ITEM_LIGHT_BRI, DGR_ITEM_LIGHT_SCHEME, DGR_ITEM_LIGHT_FIXED_COLOR,
|
|
DGR_ITEM_BRI_PRESET_LOW, DGR_ITEM_BRI_PRESET_HIGH, DGR_ITEM_BRI_POWER_ON,
|
|
// Add new 8-bit items before this line
|
|
DGR_ITEM_LAST_8BIT, DGR_ITEM_MAX_8BIT = 63,
|
|
//DGR_ITEM_ANALOG1, DGR_ITEM_ANALOG2, DGR_ITEM_ANALOG3, DGR_ITEM_ANALOG4, DGR_ITEM_ANALOG5,
|
|
// Add new 16-bit items before this line
|
|
DGR_ITEM_LAST_16BIT, DGR_ITEM_MAX_16BIT = 127,
|
|
DGR_ITEM_POWER, DGR_ITEM_DIMMER_RANGE,
|
|
// Add new 32-bit items before this line
|
|
DGR_ITEM_LAST_32BIT, DGR_ITEM_MAX_32BIT = 191,
|
|
// Add new string items before this line
|
|
DGR_ITEM_LAST_STRING, DGR_ITEM_MAX_STRING = 223,
|
|
DGR_ITEM_LIGHT_CHANNELS };
|
|
|
|
enum DevGroupShareItem { DGR_SHARE_POWER = 1, DGR_SHARE_LIGHT_BRI = 2, DGR_SHARE_LIGHT_FADE = 4, DGR_SHARE_LIGHT_SCHEME = 8,
|
|
DGR_SHARE_LIGHT_COLOR = 16, DGR_SHARE_DIMMER_SETTINGS = 32 };
|
|
|
|
enum CommandSource { SRC_IGNORE, SRC_MQTT, SRC_RESTART, SRC_BUTTON, SRC_SWITCH, SRC_BACKLOG, SRC_SERIAL, SRC_WEBGUI, SRC_WEBCOMMAND, SRC_WEBCONSOLE, SRC_PULSETIMER,
|
|
SRC_TIMER, SRC_RULE, SRC_MAXPOWER, SRC_MAXENERGY, SRC_OVERTEMP, SRC_LIGHT, SRC_KNX, SRC_DISPLAY, SRC_WEMO, SRC_HUE, SRC_RETRY, SRC_REMOTE, SRC_SHUTTER,
|
|
SRC_HEATING, SRC_MAX };
|
|
const char kCommandSource[] PROGMEM = "I|MQTT|Restart|Button|Switch|Backlog|Serial|WebGui|WebCommand|WebConsole|PulseTimer|"
|
|
"Timer|Rule|MaxPower|MaxEnergy|Overtemp|Light|Knx|Display|Wemo|Hue|Retry|Remote|Shutter";
|
|
|
|
const uint8_t kDefaultRfCode[9] PROGMEM = { 0x21, 0x16, 0x01, 0x0E, 0x03, 0x48, 0x2E, 0x1A, 0x00 };
|
|
|
|
enum TasmotaSerialConfig {
|
|
TS_SERIAL_5N1, TS_SERIAL_6N1, TS_SERIAL_7N1, TS_SERIAL_8N1,
|
|
TS_SERIAL_5N2, TS_SERIAL_6N2, TS_SERIAL_7N2, TS_SERIAL_8N2,
|
|
TS_SERIAL_5E1, TS_SERIAL_6E1, TS_SERIAL_7E1, TS_SERIAL_8E1,
|
|
TS_SERIAL_5E2, TS_SERIAL_6E2, TS_SERIAL_7E2, TS_SERIAL_8E2,
|
|
TS_SERIAL_5O1, TS_SERIAL_6O1, TS_SERIAL_7O1, TS_SERIAL_8O1,
|
|
TS_SERIAL_5O2, TS_SERIAL_6O2, TS_SERIAL_7O2, TS_SERIAL_8O2 };
|
|
|
|
const SerConfu8 kTasmotaSerialConfig[] PROGMEM = {
|
|
SERIAL_5N1, SERIAL_6N1, SERIAL_7N1, SERIAL_8N1,
|
|
SERIAL_5N2, SERIAL_6N2, SERIAL_7N2, SERIAL_8N2,
|
|
SERIAL_5E1, SERIAL_6E1, SERIAL_7E1, SERIAL_8E1,
|
|
SERIAL_5E2, SERIAL_6E2, SERIAL_7E2, SERIAL_8E2,
|
|
SERIAL_5O1, SERIAL_6O1, SERIAL_7O1, SERIAL_8O1,
|
|
SERIAL_5O2, SERIAL_6O2, SERIAL_7O2, SERIAL_8O2
|
|
};
|
|
|
|
#endif // _TASMOTA_H_
|