270 lines
8.5 KiB
C
270 lines
8.5 KiB
C
#pragma once
|
|
|
|
#ifdef ESP_PLATFORM
|
|
#include "sdkconfig.h"
|
|
#else
|
|
#include "ext_nimble_config.h"
|
|
#endif
|
|
|
|
#include "nimconfig_rename.h"
|
|
|
|
/***********************************************
|
|
* Arduino user-config options start here
|
|
**********************************************/
|
|
|
|
/** @brief Un-comment to change the number of simultaneous connections (esp controller max is 9) */
|
|
// #define CONFIG_BT_NIMBLE_MAX_CONNECTIONS 3
|
|
|
|
/** @brief Un-comment to enable storing the timestamp when an attribute value is updated\n
|
|
* This allows for checking the last update time using getTimeStamp() or getValue(time_t*)\n
|
|
* If disabled, the timestamp returned from these functions will be 0.\n
|
|
* Disabling timestamps will reduce the memory used for each value.\n
|
|
* 1 = Enabled, 0 = Disabled; Default = Disabled
|
|
*/
|
|
// #define CONFIG_NIMBLE_CPP_ATT_VALUE_TIMESTAMP_ENABLED 0
|
|
|
|
/** @brief Uncomment to set the default allocation size (bytes) for each attribute if\n
|
|
* not specified when the constructor is called. This is also the size used when a remote\n
|
|
* characteristic or descriptor is constructed before a value is read/notifed.\n
|
|
* Increasing this will reduce reallocations but increase memory footprint.\n
|
|
* Default value is 20. Range: 1 : 512 (BLE_ATT_ATTR_MAX_LEN)
|
|
*/
|
|
// #define CONFIG_NIMBLE_CPP_ATT_VALUE_INIT_LENGTH 20
|
|
|
|
/** @brief Un-comment to change the default MTU size */
|
|
// #define CONFIG_BT_NIMBLE_ATT_PREFERRED_MTU 255
|
|
|
|
/** @brief Un-comment to change default device name */
|
|
// #define CONFIG_BT_NIMBLE_SVC_GAP_DEVICE_NAME "nimble"
|
|
|
|
/** @brief Un-comment to set the debug log messages level from the NimBLE host stack.\n
|
|
* Values: 0 = DEBUG, 1 = INFO, 2 = WARNING, 3 = ERROR, 4 = CRITICAL, 5+ = NONE\n
|
|
* Uses approx. 32kB of flash memory.
|
|
*/
|
|
// #define CONFIG_BT_NIMBLE_LOG_LEVEL 5
|
|
|
|
/** @brief Un-comment to set the debug log messages level from the NimBLE CPP Wrapper.\n
|
|
* Values: 0 = NONE, 1 = ERROR, 2 = WARNING, 3 = INFO, 4+ = DEBUG\n
|
|
* Uses approx. 32kB of flash memory.
|
|
*/
|
|
// #define CONFIG_NIMBLE_CPP_LOG_LEVEL 0
|
|
|
|
/** @brief Un-comment to use timestamps with characteristic / descriptor values
|
|
* If not enabled the `::get/readValue()` calls with a timestamp parameter will set the timestamp to 0.
|
|
*/
|
|
// #define NIMBLE_ATT_VALUE_TIMESTAMP_ENABLED
|
|
|
|
/** @brief Un-comment to see NimBLE host return codes as text debug log messages.
|
|
* Uses approx. 7kB of flash memory.
|
|
*/
|
|
// #define CONFIG_NIMBLE_CPP_ENABLE_RETURN_CODE_TEXT
|
|
|
|
/** @brief Un-comment to see GAP event codes as text in debug log messages.
|
|
* Uses approx. 1kB of flash memory.
|
|
*/
|
|
// #define CONFIG_NIMBLE_CPP_ENABLE_GAP_EVENT_CODE_TEXT
|
|
|
|
/** @brief Un-comment to see advertisment types as text while scanning in debug log messages.
|
|
* Uses approx. 250 bytes of flash memory.
|
|
*/
|
|
// #define CONFIG_NIMBLE_CPP_ENABLE_ADVERTISMENT_TYPE_TEXT
|
|
|
|
/** @brief Un-comment to change the default GAP appearance */
|
|
// #define CONFIG_BT_NIMBLE_SVC_GAP_APPEARANCE 0x0
|
|
|
|
/** @brief Un-comment if not using NimBLE Client functions \n
|
|
* Reduces flash size by approx. 7kB.
|
|
*/
|
|
// #define CONFIG_BT_NIMBLE_ROLE_CENTRAL_DISABLED
|
|
|
|
/** @brief Un-comment if not using NimBLE Scan functions \n
|
|
* Reduces flash size by approx. 26kB.
|
|
*/
|
|
// #define CONFIG_BT_NIMBLE_ROLE_OBSERVER_DISABLED
|
|
|
|
/** @brief Un-comment if not using NimBLE Server functions \n
|
|
* Reduces flash size by approx. 16kB.
|
|
*/
|
|
// #define CONFIG_BT_NIMBLE_ROLE_PERIPHERAL_DISABLED
|
|
|
|
/** @brief Un-comment if not using NimBLE Advertising functions \n
|
|
* Reduces flash size by approx. 5kB.
|
|
*/
|
|
// #define CONFIG_BT_NIMBLE_ROLE_BROADCASTER_DISABLED
|
|
|
|
/** @brief Un-comment to change the number of devices allowed to store/bond with */
|
|
// #define CONFIG_BT_NIMBLE_MAX_BONDS 3
|
|
|
|
/** @brief Un-comment to change the maximum number of CCCD subscriptions to store */
|
|
// #define CONFIG_BT_NIMBLE_MAX_CCCDS 8
|
|
|
|
/** @brief Un-comment to change the random address refresh time (in seconds) */
|
|
// #define CONFIG_BT_NIMBLE_RPA_TIMEOUT 900
|
|
|
|
/**
|
|
* @brief Un-comment to change the number of MSYS buffers available.
|
|
* @details MSYS is a system level mbuf registry. For prepare write & prepare \n
|
|
* responses MBUFs are allocated out of msys_1 pool. This may need to be increased if\n
|
|
* you are sending large blocks of data with a low MTU. E.g: 512 bytes with 23 MTU will fail.
|
|
*/
|
|
// #define CONFIG_BT_NIMBLE_MSYS1_BLOCK_COUNT 12
|
|
|
|
/** @brief Un-comment to use external PSRAM for the NimBLE host */
|
|
// #define CONFIG_BT_NIMBLE_MEM_ALLOC_MODE_EXTERNAL 1
|
|
|
|
/** @brief Un-comment to change the core NimBLE host runs on */
|
|
// #define CONFIG_BT_NIMBLE_PINNED_TO_CORE 0
|
|
|
|
/** @brief Un-comment to change the stack size for the NimBLE host task */
|
|
// #define CONFIG_BT_NIMBLE_TASK_STACK_SIZE 4096
|
|
|
|
/**********************************
|
|
End Arduino user-config
|
|
**********************************/
|
|
|
|
/* This section should not be altered */
|
|
#ifndef CONFIG_BT_NIMBLE_ROLE_CENTRAL_DISABLED
|
|
#define CONFIG_BT_NIMBLE_ROLE_CENTRAL
|
|
#endif
|
|
|
|
#ifndef CONFIG_BT_NIMBLE_ROLE_OBSERVER_DISABLED
|
|
#define CONFIG_BT_NIMBLE_ROLE_OBSERVER
|
|
#endif
|
|
|
|
#ifndef CONFIG_BT_NIMBLE_ROLE_PERIPHERAL_DISABLED
|
|
#define CONFIG_BT_NIMBLE_ROLE_PERIPHERAL
|
|
#endif
|
|
|
|
#ifndef CONFIG_BT_NIMBLE_ROLE_BROADCASTER_DISABLED
|
|
#define CONFIG_BT_NIMBLE_ROLE_BROADCASTER
|
|
#endif
|
|
|
|
#ifndef CONFIG_BT_NIMBLE_PINNED_TO_CORE
|
|
#define CONFIG_BT_NIMBLE_PINNED_TO_CORE 0
|
|
#endif
|
|
|
|
#ifndef CONFIG_BT_NIMBLE_TASK_STACK_SIZE
|
|
#define CONFIG_BT_NIMBLE_TASK_STACK_SIZE 4096
|
|
#endif
|
|
|
|
#ifndef CONFIG_BT_NIMBLE_MEM_ALLOC_MODE_EXTERNAL
|
|
#define CONFIG_BT_NIMBLE_MEM_ALLOC_MODE_INTERNAL 1
|
|
#endif
|
|
|
|
#ifndef CONFIG_BT_NIMBLE_MAX_CONNECTIONS
|
|
#define CONFIG_BT_NIMBLE_MAX_CONNECTIONS 3
|
|
#endif
|
|
|
|
#ifndef CONFIG_BT_NIMBLE_MAX_BONDS
|
|
#define CONFIG_BT_NIMBLE_MAX_BONDS 3
|
|
#endif
|
|
|
|
#ifndef CONFIG_BT_NIMBLE_MAX_CCCDS
|
|
#define CONFIG_BT_NIMBLE_MAX_CCCDS 8
|
|
#endif
|
|
|
|
#ifndef CONFIG_BT_NIMBLE_SVC_GAP_DEVICE_NAME
|
|
#define CONFIG_BT_NIMBLE_SVC_GAP_DEVICE_NAME "nimble"
|
|
#endif
|
|
|
|
#ifndef CONFIG_BT_NIMBLE_ATT_PREFERRED_MTU
|
|
#define CONFIG_BT_NIMBLE_ATT_PREFERRED_MTU 255
|
|
#endif
|
|
|
|
#ifndef CONFIG_BT_NIMBLE_SVC_GAP_APPEARANCE
|
|
#define CONFIG_BT_NIMBLE_SVC_GAP_APPEARANCE 0x0
|
|
#endif
|
|
|
|
#ifndef CONFIG_BT_NIMBLE_MSYS1_BLOCK_COUNT
|
|
#define CONFIG_BT_NIMBLE_MSYS1_BLOCK_COUNT 12
|
|
#endif
|
|
|
|
#ifndef CONFIG_BT_NIMBLE_RPA_TIMEOUT
|
|
#define CONFIG_BT_NIMBLE_RPA_TIMEOUT 900
|
|
#endif
|
|
|
|
#ifndef CONFIG_BT_NIMBLE_LOG_LEVEL
|
|
#define CONFIG_BT_NIMBLE_LOG_LEVEL 5
|
|
#endif
|
|
|
|
|
|
/** @brief Set if CCCD's and bond data should be stored in NVS */
|
|
#define CONFIG_BT_NIMBLE_NVS_PERSIST 0
|
|
|
|
/** @brief Allow legacy paring */
|
|
#define CONFIG_BT_NIMBLE_SM_LEGACY 1
|
|
|
|
/** @brief Allow BLE secure connections */
|
|
#define CONFIG_BT_NIMBLE_SM_SC 1
|
|
|
|
/** @brief Max device name length (bytes) */
|
|
#define CONFIG_BT_NIMBLE_GAP_DEVICE_NAME_MAX_LEN 31
|
|
|
|
/** @brief ACL Buffer count */
|
|
#define CONFIG_BT_NIMBLE_ACL_BUF_COUNT 12
|
|
|
|
/** @brief ACL Buffer size */
|
|
#define CONFIG_BT_NIMBLE_ACL_BUF_SIZE 255
|
|
|
|
/** @brief HCI Event Buffer size */
|
|
#define CONFIG_BT_NIMBLE_HCI_EVT_BUF_SIZE 70
|
|
|
|
/** @brief Number of high priority HCI event buffers */
|
|
#define CONFIG_BT_NIMBLE_HCI_EVT_HI_BUF_COUNT 30
|
|
|
|
/** @brief Number of low priority HCI event buffers */
|
|
#define CONFIG_BT_NIMBLE_HCI_EVT_LO_BUF_COUNT 8
|
|
|
|
/** @brief Maximum number of connection oriented channels */
|
|
#define CONFIG_BT_NIMBLE_L2CAP_COC_MAX_NUM 0
|
|
|
|
#define CONFIG_BT_NIMBLE_HS_FLOW_CTRL 1
|
|
#define CONFIG_BT_NIMBLE_HS_FLOW_CTRL_ITVL 1000
|
|
#define CONFIG_BT_NIMBLE_HS_FLOW_CTRL_THRESH 2
|
|
#define CONFIG_BT_NIMBLE_HS_FLOW_CTRL_TX_ON_DISCONNECT 1
|
|
|
|
#define CONFIG_BT_NIMBLE_HS_STOP_TIMEOUT_MS 2000
|
|
|
|
#ifndef CONFIG_BT_ENABLED
|
|
#define CONFIG_BT_ENABLED
|
|
#endif
|
|
|
|
#ifdef ESP_PLATFORM
|
|
#ifndef CONFIG_BTDM_CONTROLLER_MODE_BLE_ONLY
|
|
#define CONFIG_BTDM_CONTROLLER_MODE_BLE_ONLY
|
|
#endif
|
|
|
|
#ifndef CONFIG_BTDM_SCAN_DUPL_TYPE_DEVICE
|
|
#define CONFIG_BTDM_SCAN_DUPL_TYPE_DEVICE 0
|
|
#endif
|
|
|
|
#ifndef CONFIG_BTDM_SCAN_DUPL_TYPE_DATA
|
|
#define CONFIG_BTDM_SCAN_DUPL_TYPE_DATA 1
|
|
#endif
|
|
|
|
#ifndef CONFIG_BTDM_SCAN_DUPL_TYPE_DATA_DEVICE
|
|
#define CONFIG_BTDM_SCAN_DUPL_TYPE_DATA_DEVICE 2
|
|
#endif
|
|
|
|
#if !defined(CONFIG_IDF_TARGET_ESP32) && !defined(CONFIG_IDF_TARGET_ESP32C3) && !defined(CONFIG_IDF_TARGET_ESP32S3)
|
|
#define CONFIG_IDF_TARGET_ESP32 1
|
|
#endif
|
|
#endif
|
|
|
|
/* Cannot use client without scan */
|
|
#if defined(CONFIG_BT_NIMBLE_ROLE_CENTRAL) && !defined(CONFIG_BT_NIMBLE_ROLE_OBSERVER)
|
|
#define CONFIG_BT_NIMBLE_ROLE_OBSERVER
|
|
#endif
|
|
|
|
/* Cannot use server without advertise */
|
|
#if defined(CONFIG_BT_NIMBLE_ROLE_PERIPHERAL) && !defined(CONFIG_BT_NIMBLE_ROLE_BROADCASTER)
|
|
#define CONFIG_BT_NIMBLE_ROLE_BROADCASTER
|
|
#endif
|
|
|
|
/* Enables the use of Arduino String class for attribute values */
|
|
#if defined __has_include
|
|
# if __has_include (<Arduino.h>)
|
|
# define NIMBLE_CPP_ARDUINO_STRING_AVAILABLE
|
|
# endif
|
|
#endif
|