Tasmota/sonoff/i18n.h
arendst e08d96acc2 v5.9.0
5.9.0 20171030
* Rewrite code (partly) using Google C++ Style Guide
(https://google.github.io/styleguide/cppguide.html)
* Rewrite code by using command lookup tables and javascript (client
side) web page expansions
* Change HTML/CSS to enable nicer form field entry
* Change default PWM assignments for H801 RGB(CW) led controller to
support optional Color/Dimmer control
*   GPIO04 (W2)    from GPIO_PWM2 to GPIO_USER to be user configurable
for GPIO_PWM5 (second White - Warm if W1 is Cold)
*   GPIO12 (Blue)  GPIO_PWM3 no change
*   GPIO13 (Green) from GPIO_PWM4 to GPIO_PWM2
*   GPIO14 (W1)    from GPIO_PWM1 to GPIO_USER to be user configurable
for GPIO_PWM4 (first White - Cold or Warm)
*   GPIO15 (Red)   from GPIO_PWM5 to GPIO_PWM1
* Change default PWM assignments for MagicHome RGB(W) led controller to
support optional Color/Dimmer control
*   GPIO05 (Green) from GPIO_PWM4 to GPIO_PWM2
*   GPIO12 (Blue)  from GPIO_PWM5 to GPIO_PWM3
*   GPIO13 (White) GPIO_USER to be user configurable for GPIO_PWM4
(White - Cold or Warm)
*   GPIO14 (Red)   from GPIO_PWM3 to GPIO_PWM1
* Change default PWM assignment for Witty Cloud to support optional
Color/Dimmer control (#976)
*   GPIO12 (Green) from GPIO_PWM4 to GPIO_PWM2
*   GPIO13 (Blue)  from GPIO_PWM5 to GPIO_PWM3
*   GPIO15 (Red)   from GPIO_PWM3 to GPIO_PWM1
* Change when another module is selected now all GPIO user configuration
is removed
* Change command name IRRemote to IRSend (#956)
* Remove Arduino IDE version too low warning as it interferes with
platformio.ini platform = espressif8266_stage
* Fix command FullTopic entry when using serial or console interface
* Fix possible UDP syslog blocking
* Fix minimum TelePeriod of 10 seconds set by web page
* Fix command GPIOx JSON response (#897)
* Fix inverted relay power on state (#909)
* Fix compile error when DOMOTICZ_UPDATE_TIMER is not defined (#930)
* Fix alignment of web page items in some browsers (#935)
* Fix setting all saved power settings to Off when SetOption0
(SaveState) = 0 (#955)
* Fix timezone range from -12/12 to -13/13 (#968)
* Fix Southern Hemisphere TIME_STD/TIME_DST (#968)
* Fix TLS MQTT SSL fingerprint test (#970, #808)
* Fix virtual relay status message used with Color/Dimmer control (#989)
* Fix command IRSend and IRHvac case sensitive parameter regression
introduced with version 5.8.0 (#993)
* Fix pressure calculation for some BMP versions regression introduced
with version 5.8.0i (#974)
* Fix Domoticz Dimmer set to same level not powering on (#945)
* Fix Blocked Loop when erasing large flash using command reset 2
(#1002)
* Fix relay power control when light power control is also configured as
regression from 5.8.0 (#1016)
* Fix Mqtt server mDNS lookup only when MqttHost name is empty (#1026)
* Add debug information to MQTT subscribe
* Add translations to I2Cscan
* Add translation to BH1750 unit lx
* Add light scheme options (Color cycle Up, Down, Random) and moving
WS2812 schemes up by 3
* Add Domoticz counter sensor to IrReceive representing Received IR
Protocol and Data
* Add option 0 to MqttHost to allow empty Mqtt host name
* Add support for Arilux AL-LC01 RGB Led controller (#370)
* Add esp8266 de-blocking to PubSubClient library (#790)
* Add Domoticz sensors for Voltage and Current (#903)
* Add platformio OTA upload support (#928, #934)
* Add warning to webpage when USE_MINIMAL is selected (#929)
* Add smoother movement of hour hand in WS2812 led clock (#936)
* Add support for Magic Home RGBW and some Arilux Led controllers (#940)
* Add command SetOption15 0 (default) for command PWM control or
SetOption15 1 for commands Color/Dimmer control to PWM RGB(CW) leds
(#941)
* Add Domoticz counter sensor to Sonoff Bridge representing Received RF
code (#943)
* Add support for Luani HVIO board
(https://luani.de/projekte/esp8266-hvio/) (#953)
* Add PWM initialization after restart (#955)
* Add IR Receiver support. Disable in user_config.h (#956)
* Add support for inverted PWM (#960)
* Add Sea level pressure calculation and Provide command Altitude (#974)
* Add support for up to 8 relays (#995)
* Add commands RfSync, RfLow, RfHigh, RfHost and RfCode to allow sending
custom RF codes (#1001)
* Add retain to ENERGY messages controlled by command SensorRetain
(#1013)
* Add commands Color2, Color3, Color4, Width2, Width3, Width4 and
SetOption16 to set Ws2812 Clock parameters (#1019)
* Add German language file (#1022)
* Add support for connecting to MQTT brokers without userid and/or
password (#1023)
* Add support for esp8266 core v2.4.0-rc2 (#1024)
* Add commands PwmRange 1,255..1023 and PwmFrequency 1,100..4000 (#1025)
* Add Polish language file (#1044, #1047)
* Add support for KMC 70011 Power Monitoring Smart Plug (#1045)
* Add support for VEML6070 I2C Ultra Violet level sensor (#1053)
* Add light turn Off Fade (#925)
* Add IrSend command option Panasonic as IrSend {"Protocol":"Panasonic",
"Bits":16388, "Data":<Panasonic data>}
*   where 16388 is 0x4004 hexadecimal (#1014)
* Add retry counter to DHT11/21/22 sensors (#1082)
2017-10-30 15:43:39 +01:00

132 lines
4.7 KiB
C

/*
i18n.h - internationalization for Sonoff-Tasmota
Copyright (C) 2017 Theo Arends
This program is free software: you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation, either version 3 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#ifndef _I18N_H_
#define _I18N_H_
#ifndef MY_LANGUAGE
#include "language/en-GB.h"
#else
#define QUOTEME(x) QUOTEME_1(x)
#define QUOTEME_1(x) #x
#define INCLUDE_FILE(x) QUOTEME(language/x.h)
#include INCLUDE_FILE(MY_LANGUAGE)
#endif
// Common
enum UnitNames {
UNIT_AMPERE,
UNIT_HOUR,
UNIT_KILOWATTHOUR,
UNIT_LUX,
UNIT_MICROSECOND,
UNIT_MILLIAMPERE,
UNIT_MILLISECOND,
UNIT_MINUTE,
UNIT_PRESSURE,
UNIT_SECOND,
UNIT_SECTORS,
UNIT_VOLT,
UNIT_WATT,
UNIT_WATTHOUR };
const char kUnitNames[] PROGMEM =
D_UNIT_AMPERE "|"
D_UNIT_HOUR "|"
D_UNIT_KILOWATTHOUR "|"
D_UNIT_LUX "|"
D_UNIT_MICROSECOND "|"
D_UNIT_MILLIAMPERE "|"
D_UNIT_MILLISECOND "|"
D_UNIT_MINUTE "|"
D_UNIT_PRESSURE "|"
D_UNIT_SECOND "|"
D_UNIT_SECTORS "|"
D_UNIT_VOLT "|"
D_UNIT_WATT "|"
D_UNIT_WATTHOUR ;
const char S_JSON_COMMAND_NVALUE_SPACE_UNIT[] PROGMEM = "{\"%s\":\"%d %s\"}";
const char S_JSON_COMMAND_SVALUE_SPACE_UNIT[] PROGMEM = "{\"%s\":\"%s %s\"}";
const char S_JSON_COMMAND_NVALUE_UNIT[] PROGMEM = "{\"%s\":\"%d%s\"}";
const char S_JSON_COMMAND_NVALUE_UNIT_NVALUE_UNIT[] PROGMEM = "{\"%s\":\"%d%s (%d%s)\"}";
const char S_JSON_COMMAND_NVALUE_SVALUE[] PROGMEM = "{\"%s\":\"%d (%s)\"}";
const char S_JSON_COMMAND_NVALUE_ACTIVE_NVALUE[] PROGMEM = "{\"%s\":\"%d (" D_ACTIVE " %d)\"}";
const char S_JSON_COMMAND_NVALUE[] PROGMEM = "{\"%s\":%d}";
const char S_JSON_COMMAND_SVALUE[] PROGMEM = "{\"%s\":\"%s\"}";
const char S_JSON_COMMAND_XVALUE[] PROGMEM = "{\"%s\":%s}"; // %s must provide quotes on non-number
const char S_JSON_COMMAND_INDEX_NVALUE[] PROGMEM = "{\"%s%d\":%d}";
const char S_JSON_COMMAND_INDEX_SVALUE[] PROGMEM = "{\"%s%d\":\"%s\"}";
const char S_JSON_COMMAND_INDEX_SVALUE_SVALUE[] PROGMEM = "{\"%s%d\":\"%s%s\"}";
const char JSON_SNS_TEMPHUM[] PROGMEM =
"%s, \"%s\":{\"" D_TEMPERATURE "\":%s, \"" D_HUMIDITY "\":%s}";
const char S_LOG_HTTP[] PROGMEM = D_LOG_HTTP;
const char S_LOG_WIFI[] PROGMEM = D_LOG_WIFI;
const char S_LOG_MQTT[] PROGMEM = D_LOG_MQTT;
const char S_RSLT_POWER[] PROGMEM = D_RSLT_POWER;
const char S_RSLT_RESULT[] PROGMEM = D_RSLT_RESULT;
const char S_RSLT_WARNING[] PROGMEM = D_RSLT_WARNING;
const char S_LWT[] PROGMEM = D_LWT;
const char S_OFFLINE[] PROGMEM = D_OFFLINE;
// sonoff.ino
#define MAX_BUTTON_COMMANDS 5 // Max number of button commands supported
const char kCommands[MAX_BUTTON_COMMANDS][14] PROGMEM = {
D_CMND_WIFICONFIG " 1", // Press button three times
D_CMND_WIFICONFIG " 2", // Press button four times
D_CMND_WIFICONFIG " 3", // Press button five times
D_CMND_RESTART " 1", // Press button six times
D_CMND_UPGRADE " 1" }; // Press button seven times
const char kWifiConfig[MAX_WIFI_OPTION][WCFG_MAX_STRING_LENGTH] PROGMEM = {
D_WCFG_0_RESTART,
D_WCFG_1_SMARTCONFIG,
D_WCFG_2_WIFIMANAGER,
D_WCFG_3_WPSCONFIG,
D_WCFG_4_RETRY,
D_WCFG_5_WAIT };
const char kPrefixes[3][PRFX_MAX_STRING_LENGTH] PROGMEM = {
D_CMND,
D_STAT,
D_TELE };
// support.ino
static const char kMonthNames[] = D_MONTH3LIST;
// webserver.ino
const char S_MAIN_MENU[] PROGMEM = D_MAIN_MENU;
const char S_CONFIGURATION[] PROGMEM = D_CONFIGURATION;
const char S_CONFIGURE_MODULE[] PROGMEM = D_CONFIGURE_MODULE;
const char S_CONFIGURE_WIFI[] PROGMEM = D_CONFIGURE_WIFI;
const char S_NO_NETWORKS_FOUND[] PROGMEM = D_NO_NETWORKS_FOUND;
const char S_CONFIGURE_MQTT[] PROGMEM = D_CONFIGURE_MQTT;
const char S_CONFIGURE_LOGGING[] PROGMEM = D_CONFIGURE_LOGGING;
const char S_CONFIGURE_OTHER[] PROGMEM = D_CONFIGURE_OTHER;
const char S_SAVE_CONFIGURATION[] PROGMEM = D_SAVE_CONFIGURATION;
const char S_RESET_CONFIGURATION[] PROGMEM = D_RESET_CONFIGURATION;
const char S_RESTORE_CONFIGURATION[] PROGMEM = D_RESTORE_CONFIGURATION;
const char S_FIRMWARE_UPGRADE[] PROGMEM = D_FIRMWARE_UPGRADE;
const char S_CONSOLE[] PROGMEM = D_CONSOLE;
const char S_INFORMATION[] PROGMEM = D_INFORMATION;
const char S_RESTART[] PROGMEM = D_RESTART;
#endif // _I18N_H_