5.9.0 20171030 * Rewrite code (partly) using Google C++ Style Guide (https://google.github.io/styleguide/cppguide.html) * Rewrite code by using command lookup tables and javascript (client side) web page expansions * Change HTML/CSS to enable nicer form field entry * Change default PWM assignments for H801 RGB(CW) led controller to support optional Color/Dimmer control * GPIO04 (W2) from GPIO_PWM2 to GPIO_USER to be user configurable for GPIO_PWM5 (second White - Warm if W1 is Cold) * GPIO12 (Blue) GPIO_PWM3 no change * GPIO13 (Green) from GPIO_PWM4 to GPIO_PWM2 * GPIO14 (W1) from GPIO_PWM1 to GPIO_USER to be user configurable for GPIO_PWM4 (first White - Cold or Warm) * GPIO15 (Red) from GPIO_PWM5 to GPIO_PWM1 * Change default PWM assignments for MagicHome RGB(W) led controller to support optional Color/Dimmer control * GPIO05 (Green) from GPIO_PWM4 to GPIO_PWM2 * GPIO12 (Blue) from GPIO_PWM5 to GPIO_PWM3 * GPIO13 (White) GPIO_USER to be user configurable for GPIO_PWM4 (White - Cold or Warm) * GPIO14 (Red) from GPIO_PWM3 to GPIO_PWM1 * Change default PWM assignment for Witty Cloud to support optional Color/Dimmer control (#976) * GPIO12 (Green) from GPIO_PWM4 to GPIO_PWM2 * GPIO13 (Blue) from GPIO_PWM5 to GPIO_PWM3 * GPIO15 (Red) from GPIO_PWM3 to GPIO_PWM1 * Change when another module is selected now all GPIO user configuration is removed * Change command name IRRemote to IRSend (#956) * Remove Arduino IDE version too low warning as it interferes with platformio.ini platform = espressif8266_stage * Fix command FullTopic entry when using serial or console interface * Fix possible UDP syslog blocking * Fix minimum TelePeriod of 10 seconds set by web page * Fix command GPIOx JSON response (#897) * Fix inverted relay power on state (#909) * Fix compile error when DOMOTICZ_UPDATE_TIMER is not defined (#930) * Fix alignment of web page items in some browsers (#935) * Fix setting all saved power settings to Off when SetOption0 (SaveState) = 0 (#955) * Fix timezone range from -12/12 to -13/13 (#968) * Fix Southern Hemisphere TIME_STD/TIME_DST (#968) * Fix TLS MQTT SSL fingerprint test (#970, #808) * Fix virtual relay status message used with Color/Dimmer control (#989) * Fix command IRSend and IRHvac case sensitive parameter regression introduced with version 5.8.0 (#993) * Fix pressure calculation for some BMP versions regression introduced with version 5.8.0i (#974) * Fix Domoticz Dimmer set to same level not powering on (#945) * Fix Blocked Loop when erasing large flash using command reset 2 (#1002) * Fix relay power control when light power control is also configured as regression from 5.8.0 (#1016) * Fix Mqtt server mDNS lookup only when MqttHost name is empty (#1026) * Add debug information to MQTT subscribe * Add translations to I2Cscan * Add translation to BH1750 unit lx * Add light scheme options (Color cycle Up, Down, Random) and moving WS2812 schemes up by 3 * Add Domoticz counter sensor to IrReceive representing Received IR Protocol and Data * Add option 0 to MqttHost to allow empty Mqtt host name * Add support for Arilux AL-LC01 RGB Led controller (#370) * Add esp8266 de-blocking to PubSubClient library (#790) * Add Domoticz sensors for Voltage and Current (#903) * Add platformio OTA upload support (#928, #934) * Add warning to webpage when USE_MINIMAL is selected (#929) * Add smoother movement of hour hand in WS2812 led clock (#936) * Add support for Magic Home RGBW and some Arilux Led controllers (#940) * Add command SetOption15 0 (default) for command PWM control or SetOption15 1 for commands Color/Dimmer control to PWM RGB(CW) leds (#941) * Add Domoticz counter sensor to Sonoff Bridge representing Received RF code (#943) * Add support for Luani HVIO board (https://luani.de/projekte/esp8266-hvio/) (#953) * Add PWM initialization after restart (#955) * Add IR Receiver support. Disable in user_config.h (#956) * Add support for inverted PWM (#960) * Add Sea level pressure calculation and Provide command Altitude (#974) * Add support for up to 8 relays (#995) * Add commands RfSync, RfLow, RfHigh, RfHost and RfCode to allow sending custom RF codes (#1001) * Add retain to ENERGY messages controlled by command SensorRetain (#1013) * Add commands Color2, Color3, Color4, Width2, Width3, Width4 and SetOption16 to set Ws2812 Clock parameters (#1019) * Add German language file (#1022) * Add support for connecting to MQTT brokers without userid and/or password (#1023) * Add support for esp8266 core v2.4.0-rc2 (#1024) * Add commands PwmRange 1,255..1023 and PwmFrequency 1,100..4000 (#1025) * Add Polish language file (#1044, #1047) * Add support for KMC 70011 Power Monitoring Smart Plug (#1045) * Add support for VEML6070 I2C Ultra Violet level sensor (#1053) * Add light turn Off Fade (#925) * Add IrSend command option Panasonic as IrSend {"Protocol":"Panasonic", "Bits":16388, "Data":<Panasonic data>} * where 16388 is 0x4004 hexadecimal (#1014) * Add retry counter to DHT11/21/22 sensors (#1082)
114 lines
3.0 KiB
C++
114 lines
3.0 KiB
C++
/*
|
|
xsns_veml6070.ino - VEML6070 ultra violet light sensor support for Sonoff-Tasmota
|
|
|
|
Copyright (C) 2017 Theo Arends
|
|
|
|
This program is free software: you can redistribute it and/or modify
|
|
it under the terms of the GNU General Public License as published by
|
|
the Free Software Foundation, either version 3 of the License, or
|
|
(at your option) any later version.
|
|
|
|
This program is distributed in the hope that it will be useful,
|
|
but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
GNU General Public License for more details.
|
|
|
|
You should have received a copy of the GNU General Public License
|
|
along with this program. If not, see <http://www.gnu.org/licenses/>.
|
|
*/
|
|
|
|
#ifdef USE_I2C
|
|
#ifdef USE_VEML6070
|
|
/*********************************************************************************************\
|
|
* VEML6070 - Ultra Violet Light Intensity
|
|
\*********************************************************************************************/
|
|
|
|
#define VEML6070_ADDR_H 0x39
|
|
#define VEML6070_ADDR_L 0x38
|
|
|
|
#define VEML6070_INTEGRATION_TIME 3 // 500msec integration time
|
|
|
|
uint8_t veml6070_address;
|
|
uint8_t veml6070_type = 0;
|
|
char veml6070_types[9];
|
|
|
|
uint16_t Veml6070ReadUv()
|
|
{
|
|
if (Wire.requestFrom(VEML6070_ADDR_H, 1) != 1) {
|
|
return -1;
|
|
}
|
|
uint16_t uvi = Wire.read();
|
|
uvi <<= 8;
|
|
if (Wire.requestFrom(VEML6070_ADDR_L, 1) != 1) {
|
|
return -1;
|
|
}
|
|
uvi |= Wire.read();
|
|
|
|
return uvi;
|
|
}
|
|
|
|
boolean Veml6070Detect()
|
|
{
|
|
if (veml6070_type) {
|
|
return true;
|
|
}
|
|
|
|
uint8_t status;
|
|
uint8_t itime = VEML6070_INTEGRATION_TIME;
|
|
boolean success = false;
|
|
|
|
veml6070_address = VEML6070_ADDR_L;
|
|
Wire.beginTransmission(veml6070_address);
|
|
Wire.write((itime << 2) | 0x02);
|
|
status = Wire.endTransmission();
|
|
if (!status) {
|
|
success = true;
|
|
veml6070_type = 1;
|
|
strcpy_P(veml6070_types, PSTR("VEML6070"));
|
|
}
|
|
if (success) {
|
|
snprintf_P(log_data, sizeof(log_data), PSTR(D_LOG_I2C "%s " D_FOUND_AT " 0x%x"), veml6070_types, veml6070_address);
|
|
AddLog(LOG_LEVEL_DEBUG);
|
|
} else {
|
|
veml6070_type = 0;
|
|
}
|
|
return success;
|
|
}
|
|
|
|
/*********************************************************************************************\
|
|
* Presentation
|
|
\*********************************************************************************************/
|
|
|
|
void MqttShowVeml6070(uint8_t* djson)
|
|
{
|
|
if (!veml6070_type) {
|
|
return;
|
|
}
|
|
|
|
uint16_t uv = Veml6070ReadUv();
|
|
snprintf_P(mqtt_data, sizeof(mqtt_data), PSTR("%s, \"%s\":{\"" D_UV_LEVEL "\":%d}"), mqtt_data, veml6070_types, uv);
|
|
*djson = 1;
|
|
#ifdef USE_DOMOTICZ
|
|
DomoticzSensor(DZ_ILLUMINANCE, uv);
|
|
#endif // USE_DOMOTICZ
|
|
}
|
|
|
|
#ifdef USE_WEBSERVER
|
|
const char HTTP_SNS_ULTRAVIOLET[] PROGMEM =
|
|
"<tr><th>VEML6070 " D_UV_LEVEL "</th><td>%d</td></tr>";
|
|
|
|
String WebShowVeml6070()
|
|
{
|
|
String page = "";
|
|
if (veml6070_type) {
|
|
char sensor[80];
|
|
snprintf_P(sensor, sizeof(sensor), HTTP_SNS_ULTRAVIOLET, Veml6070ReadUv());
|
|
page += sensor;
|
|
}
|
|
return page;
|
|
}
|
|
#endif // USE_WEBSERVER
|
|
#endif // USE_VEML6070
|
|
#endif // USE_I2C
|
|
|