3403ca1e0a
5.10.0 20171201 * Upgrade library ArduinoJson to 5.11.2 * Upgrade library IRRemoteEsp8266 to 2.2.1 + 2 commits but disabled some protocols (code size reduction) * Upgrade library NeoPixelBus to 2.2.9 * Upgrade library OneWire to 2.3.3 + 6 commits and disabled CRC lookup-table (#define ONEWIRE_CRC8_TABLE 0) (code size reduction) * Update library PubSubClient to 2.6 + 9 commits and additional delay (#790) * Update core_esp8266_wiring_digital.c to latest (staged) level * Patch library I2Cdevlib-Core for esp8266-core 2.4.0-rc2 compatibility * Remove command EnergyReset 1..3 now replaced by ENergyReset1 to EnergyReset3 * Remove spaces in JSON messages (code size reduction) * Renamed xsns_05_ds18x20.ino to xsns_05_ds18x20_legacy.ino still using library OneWire and providing dynamic sensor scan * Fix possible iram1_0_seg compile error by shrinking ICACHE_RAM_ATTR code usage * Fix PWM watchdog timeout if Dimmer is set to 100 or Color set to 0xFF (#1146) * Fix Sonoff Bridge Learn Mode hang caused by unrecognised RF code (#1181) * Fix blank console log window by using XML character encoding (#1187) * Fix wrong response name for command HlwISet (#1214) * Fix DHT type sensor timeout recognition by distinguish "signal already there" from "timeout" (#1233) * Add fixed color options 1..12 to command Color * Add + (plus) and - (minus) to commands Dimmer (+10/-10), Speed and Scheme * Add + (plus) and - (minus) to command Color to select 1 out of 12 preset colors * Add + (plus) and - (minus) to command Ct to control ColdWarm led ColorTemperature (+34/-34) * Add commands EnergyReset1 0..42500, EnergyReset2 0..42500 and EnergyReset3 0..42500000 * to (Re)set Energy Today, Yesterday or Total respectively in Wh (#406, #685, #1202) * Add optional ADS1115 driver as alternative for unsupported I2Cdevlib in esp8266-core 2.4.0-rc2 * Add support for INA219 Voltage and Current sensor to be enabled in user_config.h with define USE_INA219 * Add support for Arilux LC11 (Clearing RF home code when selecting no Arilux module) * Add support for WS2812 RGBW ledstrips to be enabled in user_config.h with define USE_WS2812_CTYPE (#1156) * Add SettingsSaveAll routine to command SaveData to be used before controlled power down (#1202) * Add option PUSHBUTTON_TOGGLE (SwitchMode 7) to allow toggling on any switch change (#1221) * Add new xdrv_05_ds18x20.ino free from library OneWire and add the following features: * Add support for DS1822 * Add forced setting of 12-bit resolution for selected device types (#1222) * Add read temperature retry counter (#1215) * Fix lost sensors by performing sensor probe at restart only thereby removing dynamic sensor probe (#1215) * Fix sensor address sorting using ascending sort on sensor type followed by sensor address * Rewrite JSON resulting in shorter message allowing more sensors in default firmware image: * "DS18B20-1":{"Id":"00000483C23A","Temperature":19.5},"DS18B20-2":{"Id":"0000048EC44C","Temperature":19.6} * Add additional define in user_config.h to select either single sensor (defines disabled), new multi sensor (USE_DS18X20) or legacy multi sensor (USE_DS18X20_LEGACY) * Add clock support for more different pixel counts (#1226) * Add support for Sonoff Dual R2 (#1249) * Add FriendlyName to web page tab and add program information to web page footer (#1275)
69 lines
3.0 KiB
C++
69 lines
3.0 KiB
C++
// Copyright 2017 David Conran
|
|
|
|
#include "IRsend.h"
|
|
#include "IRsend_test.h"
|
|
#include "gtest/gtest.h"
|
|
|
|
// Tests for sendGlobalCache().
|
|
|
|
// Test sending a typical command wihtout a repeat.
|
|
TEST(TestSendGlobalCache, NonRepeatingCode) {
|
|
IRsendTest irsend(4);
|
|
IRrecv irrecv(4);
|
|
irsend.begin();
|
|
irsend.reset();
|
|
|
|
// Modified NEC TV "Power On" from Global Cache with no repeats
|
|
uint16_t gc_test[71] = {38000, 1, 1, 342, 172, 21, 22, 21, 21, 21, 65, 21, 21,
|
|
21, 22, 21, 22, 21, 21, 21, 22, 21, 65, 21, 65, 21,
|
|
22, 21, 65, 21, 65, 21, 65, 21, 65, 21, 65, 21, 65,
|
|
21, 22, 21, 22, 21, 21, 21, 22, 21, 22, 21, 65, 21,
|
|
22, 21, 21, 21, 65, 21, 65, 21, 65, 21, 64, 22, 65,
|
|
21, 22, 21, 65, 21, 1519};
|
|
irsend.sendGC(gc_test, 71);
|
|
irsend.makeDecodeResult();
|
|
EXPECT_EQ("m8892s4472m546s572m546s546m546s1690m546s546m546s572m546s572"
|
|
"m546s546m546s572m546s1690m546s1690m546s572m546s1690m546s1690"
|
|
"m546s1690m546s1690m546s1690m546s1690m546s572m546s572m546s546"
|
|
"m546s572m546s572m546s1690m546s572m546s546m546s1690m546s1690"
|
|
"m546s1690m546s1664m572s1690m546s572m546s1690m546s39494",
|
|
irsend.outputStr());
|
|
EXPECT_TRUE(irrecv.decodeNEC(&irsend.capture));
|
|
EXPECT_EQ(NEC, irsend.capture.decode_type);
|
|
EXPECT_EQ(NEC_BITS, irsend.capture.bits);
|
|
EXPECT_EQ(0x20DF827D, irsend.capture.value);
|
|
EXPECT_EQ(0x4, irsend.capture.address);
|
|
EXPECT_EQ(0x41, irsend.capture.command);
|
|
}
|
|
|
|
// Test sending typical command with repeats.
|
|
TEST(TestSendGlobalCache, RepeatCode) {
|
|
IRsendTest irsend(4);
|
|
IRrecv irrecv(4);
|
|
irsend.begin();
|
|
irsend.reset();
|
|
|
|
// Sherwood (NEC-like) "Power On" from Global Cache with 2 repeats
|
|
uint16_t gc_test[75] = {38000, 2, 69, 341, 171, 21, 64, 21, 64, 21, 21, 21,
|
|
21, 21, 21, 21, 21, 21, 21, 21, 64, 21, 64, 21, 21,
|
|
21, 64, 21, 21, 21, 21, 21, 21, 21, 64, 21, 21, 21,
|
|
64, 21, 21, 21, 21, 21, 21, 21, 64, 21, 21, 21, 21,
|
|
21, 21, 21, 21, 21, 64, 21, 64, 21, 64, 21, 21, 21,
|
|
64, 21, 64, 21, 64, 21, 1600, 341, 85, 21, 3647};
|
|
irsend.sendGC(gc_test, 75);
|
|
irsend.makeDecodeResult();
|
|
EXPECT_EQ("m8866s4446m546s1664m546s1664m546s546m546s546m546s546m546s546"
|
|
"m546s546m546s1664m546s1664m546s546m546s1664m546s546m546s546"
|
|
"m546s546m546s1664m546s546m546s1664m546s546m546s546m546s546"
|
|
"m546s1664m546s546m546s546m546s546m546s546m546s1664m546s1664"
|
|
"m546s1664m546s546m546s1664m546s1664m546s1664m546s41600"
|
|
"m8866s2210m546s94822"
|
|
"m8866s2210m546s94822", irsend.outputStr());
|
|
EXPECT_TRUE(irrecv.decodeNEC(&irsend.capture));
|
|
EXPECT_EQ(NEC, irsend.capture.decode_type);
|
|
EXPECT_EQ(NEC_BITS, irsend.capture.bits);
|
|
EXPECT_EQ(0xC1A28877, irsend.capture.value);
|
|
EXPECT_EQ(0x4583, irsend.capture.address);
|
|
EXPECT_EQ(0x11, irsend.capture.command);
|
|
}
|