e08d96acc2
5.9.0 20171030 * Rewrite code (partly) using Google C++ Style Guide (https://google.github.io/styleguide/cppguide.html) * Rewrite code by using command lookup tables and javascript (client side) web page expansions * Change HTML/CSS to enable nicer form field entry * Change default PWM assignments for H801 RGB(CW) led controller to support optional Color/Dimmer control * GPIO04 (W2) from GPIO_PWM2 to GPIO_USER to be user configurable for GPIO_PWM5 (second White - Warm if W1 is Cold) * GPIO12 (Blue) GPIO_PWM3 no change * GPIO13 (Green) from GPIO_PWM4 to GPIO_PWM2 * GPIO14 (W1) from GPIO_PWM1 to GPIO_USER to be user configurable for GPIO_PWM4 (first White - Cold or Warm) * GPIO15 (Red) from GPIO_PWM5 to GPIO_PWM1 * Change default PWM assignments for MagicHome RGB(W) led controller to support optional Color/Dimmer control * GPIO05 (Green) from GPIO_PWM4 to GPIO_PWM2 * GPIO12 (Blue) from GPIO_PWM5 to GPIO_PWM3 * GPIO13 (White) GPIO_USER to be user configurable for GPIO_PWM4 (White - Cold or Warm) * GPIO14 (Red) from GPIO_PWM3 to GPIO_PWM1 * Change default PWM assignment for Witty Cloud to support optional Color/Dimmer control (#976) * GPIO12 (Green) from GPIO_PWM4 to GPIO_PWM2 * GPIO13 (Blue) from GPIO_PWM5 to GPIO_PWM3 * GPIO15 (Red) from GPIO_PWM3 to GPIO_PWM1 * Change when another module is selected now all GPIO user configuration is removed * Change command name IRRemote to IRSend (#956) * Remove Arduino IDE version too low warning as it interferes with platformio.ini platform = espressif8266_stage * Fix command FullTopic entry when using serial or console interface * Fix possible UDP syslog blocking * Fix minimum TelePeriod of 10 seconds set by web page * Fix command GPIOx JSON response (#897) * Fix inverted relay power on state (#909) * Fix compile error when DOMOTICZ_UPDATE_TIMER is not defined (#930) * Fix alignment of web page items in some browsers (#935) * Fix setting all saved power settings to Off when SetOption0 (SaveState) = 0 (#955) * Fix timezone range from -12/12 to -13/13 (#968) * Fix Southern Hemisphere TIME_STD/TIME_DST (#968) * Fix TLS MQTT SSL fingerprint test (#970, #808) * Fix virtual relay status message used with Color/Dimmer control (#989) * Fix command IRSend and IRHvac case sensitive parameter regression introduced with version 5.8.0 (#993) * Fix pressure calculation for some BMP versions regression introduced with version 5.8.0i (#974) * Fix Domoticz Dimmer set to same level not powering on (#945) * Fix Blocked Loop when erasing large flash using command reset 2 (#1002) * Fix relay power control when light power control is also configured as regression from 5.8.0 (#1016) * Fix Mqtt server mDNS lookup only when MqttHost name is empty (#1026) * Add debug information to MQTT subscribe * Add translations to I2Cscan * Add translation to BH1750 unit lx * Add light scheme options (Color cycle Up, Down, Random) and moving WS2812 schemes up by 3 * Add Domoticz counter sensor to IrReceive representing Received IR Protocol and Data * Add option 0 to MqttHost to allow empty Mqtt host name * Add support for Arilux AL-LC01 RGB Led controller (#370) * Add esp8266 de-blocking to PubSubClient library (#790) * Add Domoticz sensors for Voltage and Current (#903) * Add platformio OTA upload support (#928, #934) * Add warning to webpage when USE_MINIMAL is selected (#929) * Add smoother movement of hour hand in WS2812 led clock (#936) * Add support for Magic Home RGBW and some Arilux Led controllers (#940) * Add command SetOption15 0 (default) for command PWM control or SetOption15 1 for commands Color/Dimmer control to PWM RGB(CW) leds (#941) * Add Domoticz counter sensor to Sonoff Bridge representing Received RF code (#943) * Add support for Luani HVIO board (https://luani.de/projekte/esp8266-hvio/) (#953) * Add PWM initialization after restart (#955) * Add IR Receiver support. Disable in user_config.h (#956) * Add support for inverted PWM (#960) * Add Sea level pressure calculation and Provide command Altitude (#974) * Add support for up to 8 relays (#995) * Add commands RfSync, RfLow, RfHigh, RfHost and RfCode to allow sending custom RF codes (#1001) * Add retain to ENERGY messages controlled by command SensorRetain (#1013) * Add commands Color2, Color3, Color4, Width2, Width3, Width4 and SetOption16 to set Ws2812 Clock parameters (#1019) * Add German language file (#1022) * Add support for connecting to MQTT brokers without userid and/or password (#1023) * Add support for esp8266 core v2.4.0-rc2 (#1024) * Add commands PwmRange 1,255..1023 and PwmFrequency 1,100..4000 (#1025) * Add Polish language file (#1044, #1047) * Add support for KMC 70011 Power Monitoring Smart Plug (#1045) * Add support for VEML6070 I2C Ultra Violet level sensor (#1053) * Add light turn Off Fade (#925) * Add IrSend command option Panasonic as IrSend {"Protocol":"Panasonic", "Bits":16388, "Data":<Panasonic data>} * where 16388 is 0x4004 hexadecimal (#1014) * Add retry counter to DHT11/21/22 sensors (#1082)
44 lines
1.8 KiB
C
44 lines
1.8 KiB
C
/*
|
|
user_config_override.h - user configuration overrides user_config.h for Sonoff-Tasmota
|
|
|
|
Copyright (C) 2017 Theo Arends
|
|
|
|
This program is free software: you can redistribute it and/or modify
|
|
it under the terms of the GNU General Public License as published by
|
|
the Free Software Foundation, either version 3 of the License, or
|
|
(at your option) any later version.
|
|
|
|
This program is distributed in the hope that it will be useful,
|
|
but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
GNU General Public License for more details.
|
|
|
|
You should have received a copy of the GNU General Public License
|
|
along with this program. If not, see <http://www.gnu.org/licenses/>.
|
|
*/
|
|
|
|
#ifndef _USER_CONFIG_OVERRIDE_H_
|
|
#define _USER_CONFIG_OVERRIDE_H_
|
|
|
|
/*****************************************************************************************************\
|
|
* ATTENTION: - Changes to most PARAMETER defines will only override flash settings if you change
|
|
* define CFG_HOLDER.
|
|
* - Expect compiler warnings when no ifdef/undef/endif sequence is used.
|
|
* - You still need to update user_config.h for major defines MODULE and USE_MQTT_TLS.
|
|
* - Changing MODULE defines are not being tested for validity as they are in user_config.h.
|
|
* - Most parameters can be changed online using commands via MQTT, WebConsole or serial.
|
|
* - So I see no use in this but anyway, your on your own.
|
|
\*****************************************************************************************************/
|
|
|
|
// Examples
|
|
//#ifdef CFG_HOLDER
|
|
//#undef CFG_HOLDER
|
|
//#endif
|
|
//#define CFG_HOLDER 0x20161210
|
|
|
|
//#ifdef STA_SSID1
|
|
//#undef STA_SSID1
|
|
//#endif
|
|
//#define STA_SSID1 "yourssid1"
|
|
|
|
#endif // _USER_CONFIG_OVERRIDE_H_
|