Add delays and retry logic for SetOption verification

- Wait 0.5s after sending command before first verification
- Retry verification once with 0.5s delay if first attempt fails
- Increase delay between commands from 0.3s to 0.5s
- Add delay after enabling rules
- Prevents false verification failures by giving device time to process
- Avoids overwhelming device with rapid command sequences

console_settings.py

@@ -179,12 +179,22 @@ class ConsoleSettingsManager:
         if not success:
             self.logger.error(f"{device_name}: Failed to set {param_name} after 3 attempts")
             return False
-        
+
+        # Wait for device to process the command before verifying
+        time.sleep(0.5)
+
         # Verify the command was applied (if possible)
-        if not self._verify_command(device_ip, device_name, param_name, param_value):
-            self.logger.warning(f"{device_name}: Verification failed for {param_name}")
-            # Don't return False here - some commands can't be verified
-        
+        verified = self._verify_command(device_ip, device_name, param_name, param_value)
+
+        if not verified:
+            # Wait a bit longer and try verification again
+            time.sleep(0.5)
+            verified = self._verify_command(device_ip, device_name, param_name, param_value)
+
+            if not verified:
+                self.logger.warning(f"{device_name}: Verification failed for {param_name}")
+                # Don't return False here - some commands can't be verified
+
         # Check if this is a rule definition - if so, enable it
         if param_name.lower().startswith('rule'):
             rule_number = param_name.lower().replace('rule', '')
@@ -202,8 +212,10 @@ class ConsoleSettingsManager:
 
                 if not success:
                     self.logger.warning(f"{device_name}: Failed to enable rule{rule_number}")
-        
-        time.sleep(0.3)  # Brief delay between commands
+
+                time.sleep(0.5)  # Wait after enabling rule
+
+        time.sleep(0.5)  # Delay between commands to avoid overwhelming device
         return True
     
     def _verify_command(self, device_ip: str, device_name: str,