s-hadinger
18bdf07903
Reduced safeboot size by 2.9KB ( #21322 )
...
* Reduced safeboot size by 2.9KB
* remove leftover
2024-05-02 23:09:56 +02:00
s-hadinger
24c8f65cb5
Compilation of Ethernet when SPI drivers are disabled ( #21321 )
2024-05-02 22:07:37 +02:00
s-hadinger
d08bf78e24
Zigbee startup event triggered after plugins are loaded ( #21320 )
2024-05-02 21:54:44 +02:00
s-hadinger
f7e285ab11
Fixed EthType for Core3 ( #21317 )
2024-05-02 14:46:28 +02:00
Jason2866
dbafe1e167
PIO inspect for ESP32
2024-05-02 14:09:23 +02:00
Jason2866
a67f4f0c06
Make use of PIO Project Inspect possible
...
without the set option, Inspect tries to analyze every lib which does fail
2024-05-02 13:57:18 +02:00
Christian Baars
08c3416255
Berry example: wave file recorder ( #21315 )
2024-05-02 13:36:28 +02:00
Jason2866
fb78c3a796
Fix PIO Inspect
...
Solo1 framework does not support PSRAM
2024-05-02 13:31:34 +02:00
Jason2866
50979c328c
Fix upper lower case difference
2024-05-01 15:18:25 +02:00
Jason2866
117cee9e6e
Update esp32 platform to 2024.04.14 ( #21299 )
...
* use new HWCDC Arduino code
2024-04-30 17:58:30 +02:00
s-hadinger
fd148a8d12
Berry math.inf, math.isinf() and fixed json ouput for inf and nan ( #21304 )
2024-04-29 22:55:57 +02:00
Christian Baars
5b5fdb0afe
WIP: make I2S bridge compile with Core 3, untested on hardware ( #21301 )
...
* make I2S bridge compile with Core 3, untested on hardware
* typo USE_I2S_BRIDGE
* rm Core 2 version
2024-04-28 22:09:09 +02:00
legchenkov
ecf7d444c6
Add Support for AHT30 Temperature and Humidity Sensor ( #19922 )
...
* Update xsns_63_aht1x.ino
Support for AHT30 added. Fixed command for loading factory calibrated data and reset command, added needed delay after read command and increased measurement period to reduce heating of sensor.
* Update xsns_63_aht1x.ino
* Update xsns_63_aht1x.ino
The reset command is aligned with the AHT10/20/30 datasheet.
* Update ru_RU.h
Translated Dew Point to russian Точка росы for sensors
* Delete tasmota/language/ru_RU.h
Will go to separate PR
* Add files via upload
* Update ru_RU.h
Partial translation update
* Add files via upload
2024-04-28 21:34:36 +02:00
Jason2866
852ce100db
add USE_I2S_ALL ( #21298 )
...
Co-authored-by: Staars <baars@klinikum-brandenburg.de>
2024-04-28 18:09:43 +02:00
Jason2866
27d2a0a2d5
add target reset ( #21292 )
2024-04-27 21:52:39 +02:00
Christian Baars
b3c075c666
I2S changes for Core 3 ( #21291 )
...
* i2s fixes and refactoring
* DMA setting added, more refactoring
2024-04-27 20:50:03 +02:00
s-hadinger
5cc5e5ef45
HASPmota demo of Renaissance Watch for 480x480 displays ( #21290 )
...
* HASPmota demo of Renaissance Watch for 480x480 displays
* Put arrow in front of date
2024-04-27 19:05:24 +02:00
Jason2866
71c8748def
Revert "Platform 2024.04.13 ( #21264 )" ( #21288 )
...
This reverts commit 492c6bbda2
2024-04-27 18:56:11 +02:00
s-hadinger
bf01e5bb70
Fix async HMDI CEC ( #21287 )
2024-04-27 18:22:50 +02:00
sfromis
311a9f18e6
Wrong feature bit for USE_SPL06_007 ( #21286 )
...
Obvious "typo" in setting the feature bit for this recently added sensor. Already mentioned in https://github.com/arendst/Tasmota/pull/21185#issuecomment-2071122611
2024-04-27 16:30:57 +02:00
bovirus
4aa2da3eb2
Update Italian language ( #21283 )
2024-04-26 16:52:35 +02:00
fb-pilot
e2a08d5d01
Add files via upload ( #21262 )
...
fix display multiple devices and add more options
2024-04-26 16:52:06 +02:00
Jason2866
41970f7d62
Disable psram check to avoid "blinking" of GPIO 16/17 at startup ( #21282 )
...
* add `DISABLE_PSRAMCHECK`
* remove code before IDF 5
* add no psram env
2024-04-25 20:19:20 +02:00
Jason2866
eef4ff389f
Delete IDF 4.4 based i2s code ( #21188 )
...
* Delete tasmota/tasmota_xdrv_driver/xdrv_42_2_i2s_mp3stream.ino
* Delete tasmota/tasmota_xdrv_driver/xdrv_42_0_i2s_audio.ino
* Delete tasmota/tasmota_xdrv_driver/xdrv_42_1_i2s_mp3mic.ino
2024-04-25 13:41:47 +02:00
s-hadinger
1e64eaddf3
Berry webserver.content_close() ( #21276 )
2024-04-25 12:50:43 +02:00
s-hadinger
466652549a
Fix faulty printing of IPv4
2024-04-25 11:23:27 +02:00
s-hadinger
2a35f325b8
Put back wifi IPv6 workaround ( #21274 )
2024-04-25 10:28:42 +02:00
s-hadinger
469492a41a
Berry web_add_handler called before Webserver is initialized ( #21272 )
2024-04-25 09:08:24 +02:00
s-hadinger
582ca598f0
HDMI CEC synchronously sends messages ( #21270 )
2024-04-24 20:06:13 +02:00
s-hadinger
91dd120aa9
TCP Tx En GPIO type ( #21269 )
2024-04-24 19:53:01 +02:00
Norbert Richter
5a8d713d77
NeoPool prevent possible multiple bus requests ( #21267 )
...
* Update NeoPool register desc
* NeoPool prevent possible multiple bus requests
2024-04-24 17:44:26 +02:00
Jason2866
492c6bbda2
Platform 2024.04.13 ( #21264 )
2024-04-24 13:04:01 +02:00
s-hadinger
b9cd7bf04a
Add ESP32S3-4848S040 display.ini ( #21259 )
2024-04-23 22:12:27 +02:00
s-hadinger
546ed9d409
Add uTouch to WT32_SC01 display.ini ( #21258 )
2024-04-23 22:05:00 +02:00
s-hadinger
9970b9d947
uDisplay fast drawing on RGB displays ( #21257 )
2024-04-23 21:17:22 +02:00
s-hadinger
595b7f750d
LVGL fix memory allocation of flush buffers ( #21256 )
2024-04-23 20:11:01 +02:00
s-hadinger
157e1afb29
LVGL disabled vector graphics ( #21242 )
2024-04-22 09:18:26 +02:00
Jason2866
805ad32a30
typo
2024-04-21 23:07:51 +02:00
Jason2866
ef99b40578
add S3 env with 120Mhz / 8MB Flash
2024-04-21 23:07:01 +02:00
s-hadinger
f6cba1986b
esp32_partition_app3904k_fs3392k partition scheme for 8MB ESP32S3 ( #21241 )
2024-04-21 22:49:33 +02:00
s-hadinger
cb70ff7a77
uDisplay avoid crashing when no valid configuration ( #21239 )
2024-04-21 15:21:50 +02:00
s-hadinger
5ecd45e2da
Berry avoid crash when Berry is disabled after bootloop ( #21235 )
2024-04-21 10:03:55 +02:00
s-hadinger
c4431eb6fe
Fixed IPv6 support in safeboot ( #21233 )
2024-04-20 22:15:54 +02:00
s-hadinger
bf47a1e51c
LVGL restore lv_palette functions ( #21232 )
2024-04-20 18:57:49 +02:00
s-hadinger
fe34b5df3d
HASPmota align attribute and expand PNG cache ( #21228 )
2024-04-20 14:23:31 +02:00
Jason2866
0e273c18f6
add S3 QIO_QSPI 120M board manifest ( #21216 )
2024-04-18 19:36:55 +02:00
Jason2866
76970ddca9
restore config as it was before switch to core 3.0.0
2024-04-18 16:53:11 +02:00
Theo Arends
0f19dcdff8
Bump version v13.4.1.2
...
- ESP32-C3 OTA binary name from `tasmota32c3cdc.bin` to `tasmota32c3.bin` with USB HWCDC and fallback to serial (#21212 )
- ESP32-C6 OTA binary name from `tasmota32c6cdc.bin` to `tasmota32c6.bin` with USB HWCDC and fallback to serial (#21212 )
- ESP32-S3 OTA binary name from `tasmota32s3cdc.bin` to `tasmota32s3.bin` with USB HWCDC and fallback to serial (#21212 )
2024-04-18 14:01:27 +02:00
Jason2866
c7ff6342d8
remove extensiom cdc from C3,C6,S3 variants ( #21212 )
2024-04-18 13:08:31 +02:00
Theo Arends
7e14db4091
Add support for SPL06_007 pressure and temperature sensor ( #21185 )
2024-04-18 11:47:16 +02:00
