3174 lines
107 KiB
C++
3174 lines
107 KiB
C++
/*
|
|
An Arduino sketch to emulate IR Daikin ARC433** & ARC477A1 remote control unit
|
|
Read more at:
|
|
http://harizanov.com/2012/02/control-daikin-air-conditioner-over-the-internet/
|
|
|
|
Copyright 2016 sillyfrog
|
|
Copyright 2017 sillyfrog, crankyoldgit
|
|
Copyright 2018-2019 crankyoldgit
|
|
Copyright 2019 pasna (IRDaikin160 class / Daikin176 class)
|
|
*/
|
|
|
|
#include "ir_Daikin.h"
|
|
#include <algorithm>
|
|
#include <cstring>
|
|
#ifndef ARDUINO
|
|
#include <string>
|
|
#endif
|
|
#include "IRrecv.h"
|
|
#include "IRremoteESP8266.h"
|
|
#include "IRsend.h"
|
|
#ifdef UNIT_TEST
|
|
#include "IRsend_test.h"
|
|
#endif
|
|
#include "IRtext.h"
|
|
#include "IRutils.h"
|
|
|
|
// Constants
|
|
// Ref:
|
|
// https://github.com/mharizanov/Daikin-AC-remote-control-over-the-Internet/tree/master/IRremote
|
|
// http://rdlab.cdmt.vn/project-2013/daikin-ir-protocol
|
|
// https://github.com/crankyoldgit/IRremoteESP8266/issues/582
|
|
|
|
using irutils::addBoolToString;
|
|
using irutils::addDayToString;
|
|
using irutils::addIntToString;
|
|
using irutils::addLabeledString;
|
|
using irutils::addModeToString;
|
|
using irutils::addTempToString;
|
|
using irutils::addFanToString;
|
|
using irutils::bcdToUint8;
|
|
using irutils::minsToString;
|
|
using irutils::setBit;
|
|
using irutils::setBits;
|
|
using irutils::sumNibbles;
|
|
using irutils::uint8ToBcd;
|
|
|
|
|
|
#if SEND_DAIKIN
|
|
// Send a Daikin A/C message.
|
|
//
|
|
// Args:
|
|
// data: An array of kDaikinStateLength bytes containing the IR command.
|
|
//
|
|
// Status: STABLE
|
|
//
|
|
// Ref:
|
|
// IRDaikinESP.cpp
|
|
// https://github.com/mharizanov/Daikin-AC-remote-control-over-the-Internet/tree/master/IRremote
|
|
// https://github.com/blafois/Daikin-IR-Reverse
|
|
void IRsend::sendDaikin(const unsigned char data[], const uint16_t nbytes,
|
|
const uint16_t repeat) {
|
|
if (nbytes < kDaikinStateLengthShort)
|
|
return; // Not enough bytes to send a proper message.
|
|
|
|
for (uint16_t r = 0; r <= repeat; r++) {
|
|
uint16_t offset = 0;
|
|
// Send the header, 0b00000
|
|
sendGeneric(0, 0, // No header for the header
|
|
kDaikinBitMark, kDaikinOneSpace, kDaikinBitMark,
|
|
kDaikinZeroSpace, kDaikinBitMark, kDaikinZeroSpace + kDaikinGap,
|
|
(uint64_t)0b00000, kDaikinHeaderLength, 38, false, 0, 50);
|
|
// Data #1
|
|
if (nbytes < kDaikinStateLength) { // Are we using the legacy size?
|
|
// Do this as a constant to save RAM and keep in flash memory
|
|
sendGeneric(kDaikinHdrMark, kDaikinHdrSpace, kDaikinBitMark,
|
|
kDaikinOneSpace, kDaikinBitMark, kDaikinZeroSpace,
|
|
kDaikinBitMark, kDaikinZeroSpace + kDaikinGap,
|
|
kDaikinFirstHeader64, 64, 38, false, 0, 50);
|
|
} else { // We are using the newer/more correct size.
|
|
sendGeneric(kDaikinHdrMark, kDaikinHdrSpace, kDaikinBitMark,
|
|
kDaikinOneSpace, kDaikinBitMark, kDaikinZeroSpace,
|
|
kDaikinBitMark, kDaikinZeroSpace + kDaikinGap,
|
|
data, kDaikinSection1Length, 38, false, 0, 50);
|
|
offset += kDaikinSection1Length;
|
|
}
|
|
// Data #2
|
|
sendGeneric(kDaikinHdrMark, kDaikinHdrSpace, kDaikinBitMark,
|
|
kDaikinOneSpace, kDaikinBitMark, kDaikinZeroSpace,
|
|
kDaikinBitMark, kDaikinZeroSpace + kDaikinGap,
|
|
data + offset, kDaikinSection2Length, 38, false, 0, 50);
|
|
offset += kDaikinSection2Length;
|
|
// Data #3
|
|
sendGeneric(kDaikinHdrMark, kDaikinHdrSpace, kDaikinBitMark,
|
|
kDaikinOneSpace, kDaikinBitMark, kDaikinZeroSpace,
|
|
kDaikinBitMark, kDaikinZeroSpace + kDaikinGap,
|
|
data + offset, nbytes - offset, 38, false, 0, 50);
|
|
}
|
|
}
|
|
#endif // SEND_DAIKIN
|
|
|
|
IRDaikinESP::IRDaikinESP(const uint16_t pin, const bool inverted,
|
|
const bool use_modulation)
|
|
: _irsend(pin, inverted, use_modulation) { stateReset(); }
|
|
|
|
void IRDaikinESP::begin(void) { _irsend.begin(); }
|
|
|
|
#if SEND_DAIKIN
|
|
void IRDaikinESP::send(const uint16_t repeat) {
|
|
_irsend.sendDaikin(getRaw(), kDaikinStateLength, repeat);
|
|
}
|
|
#endif // SEND_DAIKIN
|
|
|
|
// Verify the checksums are valid for a given state.
|
|
// Args:
|
|
// state: The array to verify the checksums of.
|
|
// length: The size of the state.
|
|
// Returns:
|
|
// A boolean.
|
|
bool IRDaikinESP::validChecksum(uint8_t state[], const uint16_t length) {
|
|
// Data #1
|
|
if (length < kDaikinSection1Length ||
|
|
state[kDaikinByteChecksum1] != sumBytes(state, kDaikinSection1Length - 1))
|
|
return false;
|
|
// Data #2
|
|
if (length < kDaikinSection1Length + kDaikinSection2Length ||
|
|
state[kDaikinByteChecksum2] != sumBytes(state + kDaikinSection1Length,
|
|
kDaikinSection2Length - 1))
|
|
return false;
|
|
// Data #3
|
|
if (length < kDaikinSection1Length + kDaikinSection2Length + 2 ||
|
|
state[length - 1] != sumBytes(state + kDaikinSection1Length +
|
|
kDaikinSection2Length,
|
|
length - (kDaikinSection1Length +
|
|
kDaikinSection2Length) - 1))
|
|
return false;
|
|
return true;
|
|
}
|
|
|
|
// Calculate and set the checksum values for the internal state.
|
|
void IRDaikinESP::checksum(void) {
|
|
remote[kDaikinByteChecksum1] = sumBytes(remote, kDaikinSection1Length - 1);
|
|
remote[kDaikinByteChecksum2] = sumBytes(remote + kDaikinSection1Length,
|
|
kDaikinSection2Length - 1);
|
|
remote[kDaikinByteChecksum3] = sumBytes(remote + kDaikinSection1Length +
|
|
kDaikinSection2Length,
|
|
kDaikinSection3Length - 1);
|
|
}
|
|
|
|
void IRDaikinESP::stateReset(void) {
|
|
for (uint8_t i = 0; i < kDaikinStateLength; i++) remote[i] = 0x0;
|
|
|
|
remote[0] = 0x11;
|
|
remote[1] = 0xDA;
|
|
remote[2] = 0x27;
|
|
remote[4] = 0xC5;
|
|
// remote[7] is a checksum byte, it will be set by checksum().
|
|
|
|
remote[8] = 0x11;
|
|
remote[9] = 0xDA;
|
|
remote[10] = 0x27;
|
|
remote[12] = 0x42;
|
|
// remote[15] is a checksum byte, it will be set by checksum().
|
|
remote[16] = 0x11;
|
|
remote[17] = 0xDA;
|
|
remote[18] = 0x27;
|
|
remote[21] = 0x49;
|
|
remote[22] = 0x1E;
|
|
remote[24] = 0xB0;
|
|
remote[27] = 0x06;
|
|
remote[28] = 0x60;
|
|
remote[31] = 0xC0;
|
|
// remote[34] is a checksum byte, it will be set by checksum().
|
|
this->checksum();
|
|
}
|
|
|
|
uint8_t *IRDaikinESP::getRaw(void) {
|
|
this->checksum(); // Ensure correct settings before sending.
|
|
return remote;
|
|
}
|
|
|
|
void IRDaikinESP::setRaw(const uint8_t new_code[], const uint16_t length) {
|
|
uint8_t offset = 0;
|
|
if (length == kDaikinStateLengthShort) { // Handle the "short" length case.
|
|
offset = kDaikinStateLength - kDaikinStateLengthShort;
|
|
this->stateReset();
|
|
}
|
|
for (uint8_t i = 0; i < length && i < kDaikinStateLength; i++)
|
|
remote[i + offset] = new_code[i];
|
|
}
|
|
|
|
void IRDaikinESP::on(void) { setPower(true); }
|
|
|
|
void IRDaikinESP::off(void) { setPower(false); }
|
|
|
|
void IRDaikinESP::setPower(const bool on) {
|
|
setBit(&remote[kDaikinBytePower], kDaikinBitPowerOffset, on);
|
|
}
|
|
|
|
bool IRDaikinESP::getPower(void) {
|
|
return GETBIT8(remote[kDaikinBytePower], kDaikinBitPowerOffset);
|
|
}
|
|
|
|
// Set the temp in deg C
|
|
void IRDaikinESP::setTemp(const uint8_t temp) {
|
|
uint8_t degrees = std::max(temp, kDaikinMinTemp);
|
|
degrees = std::min(degrees, kDaikinMaxTemp);
|
|
remote[kDaikinByteTemp] = degrees << 1;
|
|
}
|
|
|
|
uint8_t IRDaikinESP::getTemp(void) { return remote[kDaikinByteTemp] >> 1; }
|
|
|
|
// Set the speed of the fan, 1-5 or kDaikinFanAuto or kDaikinFanQuiet
|
|
void IRDaikinESP::setFan(const uint8_t fan) {
|
|
// Set the fan speed bits, leave low 4 bits alone
|
|
uint8_t fanset;
|
|
if (fan == kDaikinFanQuiet || fan == kDaikinFanAuto)
|
|
fanset = fan;
|
|
else if (fan < kDaikinFanMin || fan > kDaikinFanMax)
|
|
fanset = kDaikinFanAuto;
|
|
else
|
|
fanset = 2 + fan;
|
|
setBits(&remote[kDaikinByteFan], kDaikinFanOffset, kDaikinFanSize, fanset);
|
|
}
|
|
|
|
uint8_t IRDaikinESP::getFan(void) {
|
|
uint8_t fan = GETBITS8(remote[kDaikinByteFan], kDaikinFanOffset,
|
|
kDaikinFanSize);
|
|
if (fan != kDaikinFanQuiet && fan != kDaikinFanAuto) fan -= 2;
|
|
return fan;
|
|
}
|
|
|
|
uint8_t IRDaikinESP::getMode(void) {
|
|
return GETBITS8(remote[kDaikinBytePower], kDaikinModeOffset, kDaikinModeSize);
|
|
}
|
|
|
|
void IRDaikinESP::setMode(const uint8_t mode) {
|
|
switch (mode) {
|
|
case kDaikinAuto:
|
|
case kDaikinCool:
|
|
case kDaikinHeat:
|
|
case kDaikinFan:
|
|
case kDaikinDry:
|
|
setBits(&remote[kDaikinBytePower], kDaikinModeOffset, kDaikinModeSize,
|
|
mode);
|
|
break;
|
|
default:
|
|
this->setMode(kDaikinAuto);
|
|
}
|
|
}
|
|
|
|
void IRDaikinESP::setSwingVertical(const bool on) {
|
|
setBits(&remote[kDaikinByteFan], kDaikinSwingOffset, kDaikinSwingSize,
|
|
on ? kDaikinSwingOn : kDaikinSwingOff);
|
|
}
|
|
|
|
bool IRDaikinESP::getSwingVertical(void) {
|
|
return GETBITS8(remote[kDaikinByteFan], kDaikinSwingOffset, kDaikinSwingSize);
|
|
}
|
|
|
|
void IRDaikinESP::setSwingHorizontal(const bool on) {
|
|
setBits(&remote[kDaikinByteSwingH], kDaikinSwingOffset, kDaikinSwingSize,
|
|
on ? kDaikinSwingOn : kDaikinSwingOff);
|
|
}
|
|
|
|
bool IRDaikinESP::getSwingHorizontal(void) {
|
|
return GETBITS8(remote[kDaikinByteSwingH], kDaikinSwingOffset,
|
|
kDaikinSwingSize);
|
|
}
|
|
|
|
void IRDaikinESP::setQuiet(const bool on) {
|
|
setBit(&remote[kDaikinByteSilent], kDaikinBitSilentOffset, on);
|
|
// Powerful & Quiet mode being on are mutually exclusive.
|
|
if (on) this->setPowerful(false);
|
|
}
|
|
|
|
bool IRDaikinESP::getQuiet(void) {
|
|
return GETBIT8(remote[kDaikinByteSilent], kDaikinBitSilentOffset);
|
|
}
|
|
|
|
void IRDaikinESP::setPowerful(const bool on) {
|
|
setBit(&remote[kDaikinBytePowerful], kDaikinBitPowerfulOffset, on);
|
|
if (on) {
|
|
// Powerful, Quiet, & Econo mode being on are mutually exclusive.
|
|
this->setQuiet(false);
|
|
this->setEcono(false);
|
|
}
|
|
}
|
|
|
|
bool IRDaikinESP::getPowerful(void) {
|
|
return GETBIT8(remote[kDaikinBytePowerful], kDaikinBitPowerfulOffset);
|
|
}
|
|
|
|
void IRDaikinESP::setSensor(const bool on) {
|
|
setBit(&remote[kDaikinByteSensor], kDaikinBitSensorOffset, on);
|
|
}
|
|
|
|
bool IRDaikinESP::getSensor(void) {
|
|
return GETBIT8(remote[kDaikinByteSensor], kDaikinBitSensorOffset);
|
|
}
|
|
|
|
void IRDaikinESP::setEcono(const bool on) {
|
|
setBit(&remote[kDaikinByteEcono], kDaikinBitEconoOffset, on);
|
|
// Powerful & Econo mode being on are mutually exclusive.
|
|
if (on) this->setPowerful(false);
|
|
}
|
|
|
|
bool IRDaikinESP::getEcono(void) {
|
|
return GETBIT8(remote[kDaikinByteEcono], kDaikinBitEconoOffset);
|
|
}
|
|
|
|
void IRDaikinESP::setMold(const bool on) {
|
|
setBit(&remote[kDaikinByteMold], kDaikinBitMoldOffset, on);
|
|
}
|
|
|
|
bool IRDaikinESP::getMold(void) {
|
|
return GETBIT8(remote[kDaikinByteMold], kDaikinBitMoldOffset);
|
|
}
|
|
|
|
void IRDaikinESP::setComfort(const bool on) {
|
|
setBit(&remote[kDaikinByteComfort], kDaikinBitComfortOffset, on);
|
|
}
|
|
|
|
bool IRDaikinESP::getComfort(void) {
|
|
return GETBIT8(remote[kDaikinByteComfort], kDaikinBitComfortOffset);
|
|
}
|
|
|
|
// starttime: Number of minutes after midnight.
|
|
void IRDaikinESP::enableOnTimer(const uint16_t starttime) {
|
|
setBit(&remote[kDaikinByteOnTimer], kDaikinBitOnTimerOffset);
|
|
remote[kDaikinByteOnTimerMinsLow] = starttime;
|
|
// only keep 4 bits
|
|
setBits(&remote[kDaikinByteOnTimerMinsHigh], kDaikinOnTimerMinsHighOffset,
|
|
kDaikinOnTimerMinsHighSize, starttime >> 8);
|
|
}
|
|
|
|
void IRDaikinESP::disableOnTimer(void) {
|
|
this->enableOnTimer(kDaikinUnusedTime);
|
|
setBit(&remote[kDaikinByteOnTimer], kDaikinBitOnTimerOffset, false);
|
|
}
|
|
|
|
uint16_t IRDaikinESP::getOnTime(void) {
|
|
return (GETBITS8(remote[kDaikinByteOnTimerMinsHigh],
|
|
kDaikinOnTimerMinsHighOffset,
|
|
kDaikinOnTimerMinsHighSize) << 8) +
|
|
remote[kDaikinByteOnTimerMinsLow];
|
|
}
|
|
|
|
bool IRDaikinESP::getOnTimerEnabled(void) {
|
|
return GETBIT8(remote[kDaikinByteOnTimer], kDaikinBitOnTimerOffset);
|
|
}
|
|
|
|
// endtime: Number of minutes after midnight.
|
|
void IRDaikinESP::enableOffTimer(const uint16_t endtime) {
|
|
setBit(&remote[kDaikinByteOffTimer], kDaikinBitOffTimerOffset);
|
|
remote[kDaikinByteOffTimerMinsHigh] = endtime >> kNibbleSize;
|
|
setBits(&remote[kDaikinByteOffTimerMinsLow], kHighNibble, kNibbleSize,
|
|
endtime);
|
|
}
|
|
|
|
void IRDaikinESP::disableOffTimer(void) {
|
|
this->enableOffTimer(kDaikinUnusedTime);
|
|
setBit(&remote[kDaikinByteOffTimer], kDaikinBitOffTimerOffset, false);
|
|
}
|
|
|
|
uint16_t IRDaikinESP::getOffTime(void) {
|
|
return (remote[kDaikinByteOffTimerMinsHigh] << kNibbleSize) +
|
|
GETBITS8(remote[kDaikinByteOffTimerMinsLow], kHighNibble, kNibbleSize);
|
|
}
|
|
|
|
bool IRDaikinESP::getOffTimerEnabled(void) {
|
|
return GETBIT8(remote[kDaikinByteOffTimer], kDaikinBitOffTimerOffset);
|
|
}
|
|
|
|
void IRDaikinESP::setCurrentTime(const uint16_t mins_since_midnight) {
|
|
uint16_t mins = mins_since_midnight;
|
|
if (mins > 24 * 60) mins = 0; // If > 23:59, set to 00:00
|
|
remote[kDaikinByteClockMinsLow] = mins;
|
|
// only keep 3 bits
|
|
setBits(&remote[kDaikinByteClockMinsHigh], kDaikinClockMinsHighOffset,
|
|
kDaikinClockMinsHighSize, mins >> 8);
|
|
}
|
|
|
|
uint16_t IRDaikinESP::getCurrentTime(void) {
|
|
return (GETBITS8(remote[kDaikinByteClockMinsHigh], kDaikinClockMinsHighOffset,
|
|
kDaikinClockMinsHighSize) << 8) +
|
|
remote[kDaikinByteClockMinsLow];
|
|
}
|
|
|
|
void IRDaikinESP::setCurrentDay(const uint8_t day_of_week) {
|
|
// 1 is SUN, 2 is MON, ..., 7 is SAT
|
|
setBits(&remote[kDaikinByteClockMinsHigh], kDaikinDoWOffset, kDaikinDoWSize,
|
|
day_of_week);
|
|
}
|
|
|
|
uint8_t IRDaikinESP::getCurrentDay(void) {
|
|
return GETBITS8(remote[kDaikinByteClockMinsHigh], kDaikinDoWOffset,
|
|
kDaikinDoWSize);
|
|
}
|
|
|
|
void IRDaikinESP::setWeeklyTimerEnable(const bool on) {
|
|
// Bit is cleared for `on`.
|
|
setBit(&remote[kDaikinByteWeeklyTimer], kDaikinBitWeeklyTimerOffset, !on);
|
|
}
|
|
|
|
bool IRDaikinESP::getWeeklyTimerEnable(void) {
|
|
return !GETBIT8(remote[kDaikinByteWeeklyTimer], kDaikinBitWeeklyTimerOffset);
|
|
}
|
|
|
|
// Convert a standard A/C mode into its native mode.
|
|
uint8_t IRDaikinESP::convertMode(const stdAc::opmode_t mode) {
|
|
switch (mode) {
|
|
case stdAc::opmode_t::kCool: return kDaikinCool;
|
|
case stdAc::opmode_t::kHeat: return kDaikinHeat;
|
|
case stdAc::opmode_t::kDry: return kDaikinDry;
|
|
case stdAc::opmode_t::kFan: return kDaikinFan;
|
|
default: return kDaikinAuto;
|
|
}
|
|
}
|
|
|
|
// Convert a standard A/C Fan speed into its native fan speed.
|
|
uint8_t IRDaikinESP::convertFan(const stdAc::fanspeed_t speed) {
|
|
switch (speed) {
|
|
case stdAc::fanspeed_t::kMin: return kDaikinFanQuiet;
|
|
case stdAc::fanspeed_t::kLow: return kDaikinFanMin;
|
|
case stdAc::fanspeed_t::kMedium: return kDaikinFanMed;
|
|
case stdAc::fanspeed_t::kHigh: return kDaikinFanMax - 1;
|
|
case stdAc::fanspeed_t::kMax: return kDaikinFanMax;
|
|
default: return kDaikinFanAuto;
|
|
}
|
|
}
|
|
|
|
// Convert a native mode to it's common equivalent.
|
|
stdAc::opmode_t IRDaikinESP::toCommonMode(const uint8_t mode) {
|
|
switch (mode) {
|
|
case kDaikinCool: return stdAc::opmode_t::kCool;
|
|
case kDaikinHeat: return stdAc::opmode_t::kHeat;
|
|
case kDaikinDry: return stdAc::opmode_t::kDry;
|
|
case kDaikinFan: return stdAc::opmode_t::kFan;
|
|
default: return stdAc::opmode_t::kAuto;
|
|
}
|
|
}
|
|
|
|
// Convert a native fan speed to it's common equivalent.
|
|
stdAc::fanspeed_t IRDaikinESP::toCommonFanSpeed(const uint8_t speed) {
|
|
switch (speed) {
|
|
case kDaikinFanMax: return stdAc::fanspeed_t::kMax;
|
|
case kDaikinFanMax - 1: return stdAc::fanspeed_t::kHigh;
|
|
case kDaikinFanMed:
|
|
case kDaikinFanMin + 1: return stdAc::fanspeed_t::kMedium;
|
|
case kDaikinFanMin: return stdAc::fanspeed_t::kLow;
|
|
case kDaikinFanQuiet: return stdAc::fanspeed_t::kMin;
|
|
default: return stdAc::fanspeed_t::kAuto;
|
|
}
|
|
}
|
|
|
|
// Convert the A/C state to it's common equivalent.
|
|
stdAc::state_t IRDaikinESP::toCommon(void) {
|
|
stdAc::state_t result;
|
|
result.protocol = decode_type_t::DAIKIN;
|
|
result.model = -1; // No models used.
|
|
result.power = this->getPower();
|
|
result.mode = this->toCommonMode(this->getMode());
|
|
result.celsius = true;
|
|
result.degrees = this->getTemp();
|
|
result.fanspeed = this->toCommonFanSpeed(this->getFan());
|
|
result.swingv = this->getSwingVertical() ? stdAc::swingv_t::kAuto :
|
|
stdAc::swingv_t::kOff;
|
|
result.swingh = this->getSwingHorizontal() ? stdAc::swingh_t::kAuto :
|
|
stdAc::swingh_t::kOff;
|
|
result.quiet = this->getQuiet();
|
|
result.turbo = this->getPowerful();
|
|
result.clean = this->getMold();
|
|
result.econo = this->getEcono();
|
|
// Not supported.
|
|
result.filter = false;
|
|
result.light = false;
|
|
result.beep = false;
|
|
result.sleep = -1;
|
|
result.clock = -1;
|
|
return result;
|
|
}
|
|
|
|
// Convert the internal state into a human readable string.
|
|
String IRDaikinESP::toString(void) {
|
|
String result = "";
|
|
result.reserve(230); // Reserve some heap for the string to reduce fragging.
|
|
result += addBoolToString(getPower(), kPowerStr, false);
|
|
result += addModeToString(getMode(), kDaikinAuto, kDaikinCool, kDaikinHeat,
|
|
kDaikinDry, kDaikinFan);
|
|
result += addTempToString(getTemp());
|
|
result += addFanToString(getFan(), kDaikinFanMax, kDaikinFanMin,
|
|
kDaikinFanAuto, kDaikinFanQuiet, kDaikinFanMed);
|
|
result += addBoolToString(getPowerful(), kPowerfulStr);
|
|
result += addBoolToString(getQuiet(), kQuietStr);
|
|
result += addBoolToString(getSensor(), kSensorStr);
|
|
result += addBoolToString(getMold(), kMouldStr);
|
|
result += addBoolToString(getComfort(), kComfortStr);
|
|
result += addBoolToString(getSwingHorizontal(), kSwingHStr);
|
|
result += addBoolToString(getSwingVertical(), kSwingVStr);
|
|
result += addLabeledString(minsToString(this->getCurrentTime()), kClockStr);
|
|
result += addDayToString(getCurrentDay(), -1);
|
|
result += addLabeledString(getOnTimerEnabled()
|
|
? minsToString(this->getOnTime()) : kOffStr,
|
|
kOnTimerStr);
|
|
result += addLabeledString(getOffTimerEnabled()
|
|
? minsToString(this->getOffTime()) : kOffStr,
|
|
kOffTimerStr);
|
|
result += addBoolToString(getWeeklyTimerEnable(), kWeeklyTimerStr);
|
|
return result;
|
|
}
|
|
|
|
#if DECODE_DAIKIN
|
|
// Decode the supplied Daikin A/C message.
|
|
// Args:
|
|
// results: Ptr to the data to decode and where to store the decode result.
|
|
// nbits: Nr. of bits to expect in the data portion. (kDaikinBits)
|
|
// strict: Flag to indicate if we strictly adhere to the specification.
|
|
// Returns:
|
|
// boolean: True if it can decode it, false if it can't.
|
|
//
|
|
// Status: STABLE / Reported as working.
|
|
//
|
|
// Ref:
|
|
// https://github.com/mharizanov/Daikin-AC-remote-control-over-the-Internet/tree/master/IRremote
|
|
bool IRrecv::decodeDaikin(decode_results *results, const uint16_t nbits,
|
|
const bool strict) {
|
|
// Is there enough data to match successfully?
|
|
if (results->rawlen < (2 * (nbits + kDaikinHeaderLength) +
|
|
kDaikinSections * (kHeader + kFooter) + kFooter - 1))
|
|
return false;
|
|
|
|
// Compliance
|
|
if (strict && nbits != kDaikinBits) return false;
|
|
|
|
uint16_t offset = kStartOffset;
|
|
match_result_t data_result;
|
|
|
|
// Header #1 - Doesn't count as data.
|
|
data_result = matchData(&(results->rawbuf[offset]), kDaikinHeaderLength,
|
|
kDaikinBitMark, kDaikinOneSpace,
|
|
kDaikinBitMark, kDaikinZeroSpace,
|
|
kDaikinTolerance, kDaikinMarkExcess, false);
|
|
offset += data_result.used;
|
|
if (data_result.success == false) return false; // Fail
|
|
if (data_result.data) return false; // The header bits should be zero.
|
|
// Footer
|
|
if (!matchMark(results->rawbuf[offset++], kDaikinBitMark,
|
|
kDaikinTolerance, kDaikinMarkExcess)) return false;
|
|
if (!matchSpace(results->rawbuf[offset++], kDaikinZeroSpace + kDaikinGap,
|
|
kDaikinTolerance, kDaikinMarkExcess)) return false;
|
|
// Sections
|
|
const uint8_t ksectionSize[kDaikinSections] = {
|
|
kDaikinSection1Length, kDaikinSection2Length, kDaikinSection3Length};
|
|
uint16_t pos = 0;
|
|
for (uint8_t section = 0; section < kDaikinSections; section++) {
|
|
uint16_t used;
|
|
// Section Header + Section Data (7 bytes) + Section Footer
|
|
used = matchGeneric(results->rawbuf + offset, results->state + pos,
|
|
results->rawlen - offset, ksectionSize[section] * 8,
|
|
kDaikinHdrMark, kDaikinHdrSpace,
|
|
kDaikinBitMark, kDaikinOneSpace,
|
|
kDaikinBitMark, kDaikinZeroSpace,
|
|
kDaikinBitMark, kDaikinZeroSpace + kDaikinGap,
|
|
section >= kDaikinSections - 1,
|
|
kDaikinTolerance, kDaikinMarkExcess, false);
|
|
if (used == 0) return false;
|
|
offset += used;
|
|
pos += ksectionSize[section];
|
|
}
|
|
// Compliance
|
|
if (strict) {
|
|
// Re-check we got the correct size/length due to the way we read the data.
|
|
if (pos * 8 != kDaikinBits) return false;
|
|
// Validate the checksum.
|
|
if (!IRDaikinESP::validChecksum(results->state)) return false;
|
|
}
|
|
|
|
// Success
|
|
results->decode_type = DAIKIN;
|
|
results->bits = nbits;
|
|
// No need to record the state as we stored it as we decoded it.
|
|
// As we use result->state, we don't record value, address, or command as it
|
|
// is a union data type.
|
|
return true;
|
|
}
|
|
#endif // DECODE_DAIKIN
|
|
|
|
#if SEND_DAIKIN2
|
|
// Send a Daikin2 A/C message.
|
|
//
|
|
// Args:
|
|
// data: An array of kDaikin2StateLength bytes containing the IR command.
|
|
//
|
|
// Status: BETA/Appears to work.
|
|
//
|
|
// Ref:
|
|
// https://github.com/crankyoldgit/IRremoteESP8266/issues/582
|
|
void IRsend::sendDaikin2(const unsigned char data[], const uint16_t nbytes,
|
|
const uint16_t repeat) {
|
|
if (nbytes < kDaikin2Section1Length)
|
|
return; // Not enough bytes to send a partial message.
|
|
|
|
for (uint16_t r = 0; r <= repeat; r++) {
|
|
// Leader
|
|
sendGeneric(kDaikin2LeaderMark, kDaikin2LeaderSpace,
|
|
0, 0, 0, 0, 0, 0, (uint64_t) 0, // No data payload.
|
|
0, kDaikin2Freq, false, 0, 50);
|
|
// Section #1
|
|
sendGeneric(kDaikin2HdrMark, kDaikin2HdrSpace, kDaikin2BitMark,
|
|
kDaikin2OneSpace, kDaikin2BitMark, kDaikin2ZeroSpace,
|
|
kDaikin2BitMark, kDaikin2Gap, data, kDaikin2Section1Length,
|
|
kDaikin2Freq, false, 0, 50);
|
|
// Section #2
|
|
sendGeneric(kDaikin2HdrMark, kDaikin2HdrSpace, kDaikin2BitMark,
|
|
kDaikin2OneSpace, kDaikin2BitMark, kDaikin2ZeroSpace,
|
|
kDaikin2BitMark, kDaikin2Gap, data + kDaikin2Section1Length,
|
|
nbytes - kDaikin2Section1Length,
|
|
kDaikin2Freq, false, 0, 50);
|
|
}
|
|
}
|
|
#endif // SEND_DAIKIN2
|
|
|
|
// Class for handling Daikin2 A/C messages.
|
|
//
|
|
// Code by crankyoldgit, Reverse engineering analysis by sheppy99
|
|
//
|
|
// Supported Remotes: Daikin ARC477A1 remote
|
|
//
|
|
// Ref:
|
|
// https://github.com/crankyoldgit/IRremoteESP8266/issues/582
|
|
// https://docs.google.com/spreadsheets/d/1f8EGfIbBUo2B-CzUFdrgKQprWakoYNKM80IKZN4KXQE/edit?usp=sharing
|
|
// https://www.daikin.co.nz/sites/default/files/daikin-split-system-US7-FTXZ25-50NV1B.pdf
|
|
IRDaikin2::IRDaikin2(const uint16_t pin, const bool inverted,
|
|
const bool use_modulation)
|
|
: _irsend(pin, inverted, use_modulation) { stateReset(); }
|
|
|
|
void IRDaikin2::begin(void) { _irsend.begin(); }
|
|
|
|
#if SEND_DAIKIN2
|
|
void IRDaikin2::send(const uint16_t repeat) {
|
|
_irsend.sendDaikin2(getRaw(), kDaikin2StateLength, repeat);
|
|
}
|
|
#endif // SEND_DAIKIN2
|
|
|
|
// Verify the checksum is valid for a given state.
|
|
// Args:
|
|
// state: The array to verify the checksum of.
|
|
// length: The size of the state.
|
|
// Returns:
|
|
// A boolean.
|
|
bool IRDaikin2::validChecksum(uint8_t state[], const uint16_t length) {
|
|
// Validate the checksum of section #1.
|
|
if (length <= kDaikin2Section1Length - 1 ||
|
|
state[kDaikin2Section1Length - 1] != sumBytes(state,
|
|
kDaikin2Section1Length - 1))
|
|
return false;
|
|
// Validate the checksum of section #2 (a.k.a. the rest)
|
|
if (length <= kDaikin2Section1Length + 1 ||
|
|
state[length - 1] != sumBytes(state + kDaikin2Section1Length,
|
|
length - kDaikin2Section1Length - 1))
|
|
return false;
|
|
return true;
|
|
}
|
|
|
|
// Calculate and set the checksum values for the internal state.
|
|
void IRDaikin2::checksum(void) {
|
|
remote_state[kDaikin2Section1Length - 1] = sumBytes(
|
|
remote_state, kDaikin2Section1Length - 1);
|
|
remote_state[kDaikin2StateLength -1 ] = sumBytes(
|
|
remote_state + kDaikin2Section1Length, kDaikin2Section2Length - 1);
|
|
}
|
|
|
|
void IRDaikin2::stateReset(void) {
|
|
for (uint8_t i = 0; i < kDaikin2StateLength; i++) remote_state[i] = 0x0;
|
|
|
|
remote_state[0] = 0x11;
|
|
remote_state[1] = 0xDA;
|
|
remote_state[2] = 0x27;
|
|
remote_state[4] = 0x01;
|
|
remote_state[6] = 0xC0;
|
|
remote_state[7] = 0x70;
|
|
remote_state[8] = 0x08;
|
|
remote_state[9] = 0x0C;
|
|
remote_state[10] = 0x80;
|
|
remote_state[11] = 0x04;
|
|
remote_state[12] = 0xB0;
|
|
remote_state[13] = 0x16;
|
|
remote_state[14] = 0x24;
|
|
remote_state[17] = 0xBE;
|
|
remote_state[18] = 0xD0;
|
|
// remote_state[19] is a checksum byte, it will be set by checksum().
|
|
remote_state[20] = 0x11;
|
|
remote_state[21] = 0xDA;
|
|
remote_state[22] = 0x27;
|
|
remote_state[25] = 0x08;
|
|
remote_state[28] = 0xA0;
|
|
remote_state[35] = 0xC1;
|
|
remote_state[36] = 0x80;
|
|
remote_state[37] = 0x60;
|
|
// remote_state[38] is a checksum byte, it will be set by checksum().
|
|
disableOnTimer();
|
|
disableOffTimer();
|
|
disableSleepTimer();
|
|
checksum();
|
|
}
|
|
|
|
uint8_t *IRDaikin2::getRaw(void) {
|
|
checksum(); // Ensure correct settings before sending.
|
|
return remote_state;
|
|
}
|
|
|
|
void IRDaikin2::setRaw(const uint8_t new_code[]) {
|
|
memcpy(remote_state, new_code, kDaikin2StateLength);
|
|
}
|
|
|
|
void IRDaikin2::on(void) { setPower(true); }
|
|
|
|
void IRDaikin2::off(void) { setPower(false); }
|
|
|
|
void IRDaikin2::setPower(const bool on) {
|
|
setBit(&remote_state[25], kDaikinBitPowerOffset, on);
|
|
setBit(&remote_state[6], kDaikin2BitPowerOffset, !on);
|
|
}
|
|
|
|
bool IRDaikin2::getPower(void) {
|
|
return GETBIT8(remote_state[25], kDaikinBitPowerOffset) &&
|
|
!GETBIT8(remote_state[6], kDaikin2BitPowerOffset);
|
|
}
|
|
|
|
uint8_t IRDaikin2::getMode(void) {
|
|
return GETBITS8(remote_state[25], kHighNibble, kModeBitsSize);
|
|
}
|
|
|
|
void IRDaikin2::setMode(const uint8_t desired_mode) {
|
|
uint8_t mode = desired_mode;
|
|
switch (mode) {
|
|
case kDaikinCool:
|
|
case kDaikinHeat:
|
|
case kDaikinFan:
|
|
case kDaikinDry: break;
|
|
default: mode = kDaikinAuto;
|
|
}
|
|
setBits(&remote_state[25], kHighNibble, kModeBitsSize, mode);
|
|
// Redo the temp setting as Cool mode has a different min temp.
|
|
if (mode == kDaikinCool) this->setTemp(this->getTemp());
|
|
}
|
|
|
|
// Set the temp in deg C
|
|
void IRDaikin2::setTemp(const uint8_t desired) {
|
|
// The A/C has a different min temp if in cool mode.
|
|
uint8_t temp = std::max(
|
|
(this->getMode() == kDaikinCool) ? kDaikin2MinCoolTemp : kDaikinMinTemp,
|
|
desired);
|
|
remote_state[26] = std::min(kDaikinMaxTemp, temp) << 1;
|
|
}
|
|
|
|
// Set the speed of the fan, 1-5 or kDaikinFanAuto or kDaikinFanQuiet
|
|
void IRDaikin2::setFan(const uint8_t fan) {
|
|
// Set the fan speed bits, leave low 4 bits alone
|
|
uint8_t fanset;
|
|
if (fan == kDaikinFanQuiet || fan == kDaikinFanAuto)
|
|
fanset = fan;
|
|
else if (fan < kDaikinFanMin || fan > kDaikinFanMax)
|
|
fanset = kDaikinFanAuto;
|
|
else
|
|
fanset = 2 + fan;
|
|
setBits(&remote_state[kDaikin2FanByte], kHighNibble, kNibbleSize, fanset);
|
|
}
|
|
|
|
uint8_t IRDaikin2::getFan(void) {
|
|
const uint8_t fan = GETBITS8(remote_state[kDaikin2FanByte], kHighNibble,
|
|
kNibbleSize);
|
|
switch (fan) {
|
|
case kDaikinFanAuto:
|
|
case kDaikinFanQuiet: return fan;
|
|
default: return fan - 2;
|
|
}
|
|
}
|
|
|
|
uint8_t IRDaikin2::getTemp(void) { return remote_state[26] >> 1; }
|
|
|
|
void IRDaikin2::setSwingVertical(const uint8_t position) {
|
|
switch (position) {
|
|
case kDaikin2SwingVHigh:
|
|
case 2:
|
|
case 3:
|
|
case 4:
|
|
case 5:
|
|
case kDaikin2SwingVLow:
|
|
case kDaikin2SwingVSwing:
|
|
case kDaikin2SwingVBreeze:
|
|
case kDaikin2SwingVCirculate:
|
|
case kDaikin2SwingVAuto:
|
|
setBits(&remote_state[18], kLowNibble, kNibbleSize, position);
|
|
}
|
|
}
|
|
|
|
uint8_t IRDaikin2::getSwingVertical(void) {
|
|
return GETBITS8(remote_state[18], kLowNibble, kNibbleSize);
|
|
}
|
|
|
|
// Convert a standard A/C vertical swing into its native version.
|
|
uint8_t IRDaikin2::convertSwingV(const stdAc::swingv_t position) {
|
|
switch (position) {
|
|
case stdAc::swingv_t::kHighest:
|
|
case stdAc::swingv_t::kHigh:
|
|
case stdAc::swingv_t::kMiddle:
|
|
case stdAc::swingv_t::kLow:
|
|
case stdAc::swingv_t::kLowest:
|
|
return (uint8_t)position + kDaikin2SwingVHigh;
|
|
case stdAc::swingv_t::kAuto: return kDaikin2SwingVSwing;
|
|
default: return kDaikin2SwingVAuto;
|
|
}
|
|
}
|
|
|
|
// Convert a native vertical swing to it's common equivalent.
|
|
stdAc::swingv_t IRDaikin2::toCommonSwingV(const uint8_t setting) {
|
|
switch (setting) {
|
|
case kDaikin2SwingVHigh: return stdAc::swingv_t::kHighest;
|
|
case kDaikin2SwingVHigh + 1: return stdAc::swingv_t::kHigh;
|
|
case kDaikin2SwingVHigh + 2:
|
|
case kDaikin2SwingVHigh + 3: return stdAc::swingv_t::kMiddle;
|
|
case kDaikin2SwingVLow - 1: return stdAc::swingv_t::kLow;
|
|
case kDaikin2SwingVLow: return stdAc::swingv_t::kLowest;
|
|
case kDaikin2SwingVAuto: return stdAc::swingv_t::kOff;
|
|
default: return stdAc::swingv_t::kAuto;
|
|
}
|
|
}
|
|
|
|
void IRDaikin2::setSwingHorizontal(const uint8_t position) {
|
|
remote_state[17] = position;
|
|
}
|
|
|
|
uint8_t IRDaikin2::getSwingHorizontal(void) { return remote_state[17]; }
|
|
|
|
void IRDaikin2::setCurrentTime(const uint16_t numMins) {
|
|
uint16_t mins = numMins;
|
|
if (numMins > 24 * 60) mins = 0; // If > 23:59, set to 00:00
|
|
remote_state[5] = mins;
|
|
setBits(&remote_state[6], kLowNibble, kNibbleSize, mins >> 8);
|
|
}
|
|
|
|
uint16_t IRDaikin2::getCurrentTime(void) {
|
|
return (GETBITS8(remote_state[6], kLowNibble, kNibbleSize) << 8) |
|
|
remote_state[5];
|
|
}
|
|
|
|
// starttime: Number of minutes after midnight.
|
|
// Note: Timer location is shared with sleep timer.
|
|
void IRDaikin2::enableOnTimer(const uint16_t starttime) {
|
|
clearSleepTimerFlag();
|
|
setBit(&remote_state[25], kDaikinBitOnTimerOffset); // Set the On Timer flag.
|
|
remote_state[30] = starttime;
|
|
setBits(&remote_state[31], kLowNibble, kNibbleSize, starttime >> 8);
|
|
}
|
|
|
|
void IRDaikin2::clearOnTimerFlag(void) {
|
|
setBit(&remote_state[25], kDaikinBitOnTimerOffset, false);
|
|
}
|
|
|
|
void IRDaikin2::disableOnTimer(void) {
|
|
enableOnTimer(kDaikinUnusedTime);
|
|
clearOnTimerFlag();
|
|
clearSleepTimerFlag();
|
|
}
|
|
|
|
uint16_t IRDaikin2::getOnTime(void) {
|
|
return (GETBITS8(remote_state[31], kLowNibble, kNibbleSize) << 8) +
|
|
remote_state[30];
|
|
}
|
|
|
|
bool IRDaikin2::getOnTimerEnabled(void) {
|
|
return GETBIT8(remote_state[25], kDaikinBitOnTimerOffset);
|
|
}
|
|
|
|
// endtime: Number of minutes after midnight.
|
|
void IRDaikin2::enableOffTimer(const uint16_t endtime) {
|
|
// Set the Off Timer flag.
|
|
setBit(&remote_state[25], kDaikinBitOffTimerOffset);
|
|
remote_state[32] = endtime >> 4;
|
|
setBits(&remote_state[31], kHighNibble, kNibbleSize, endtime);
|
|
}
|
|
|
|
void IRDaikin2::disableOffTimer(void) {
|
|
enableOffTimer(kDaikinUnusedTime);
|
|
// Clear the Off Timer flag.
|
|
setBit(&remote_state[25], kDaikinBitOffTimerOffset, false);
|
|
}
|
|
|
|
uint16_t IRDaikin2::getOffTime(void) {
|
|
return (remote_state[32] << 4) + GETBITS8(remote_state[31], kHighNibble,
|
|
kNibbleSize);
|
|
}
|
|
|
|
bool IRDaikin2::getOffTimerEnabled(void) {
|
|
return GETBIT8(remote_state[25], kDaikinBitOffTimerOffset);
|
|
}
|
|
|
|
uint8_t IRDaikin2::getBeep(void) {
|
|
return GETBITS8(remote_state[7], kDaikin2BeepOffset, kDaikin2BeepSize);
|
|
}
|
|
|
|
void IRDaikin2::setBeep(const uint8_t beep) {
|
|
setBits(&remote_state[7], kDaikin2BeepOffset, kDaikin2BeepSize, beep);
|
|
}
|
|
|
|
uint8_t IRDaikin2::getLight(void) {
|
|
return GETBITS8(remote_state[7], kDaikin2LightOffset, kDaikin2LightSize);
|
|
}
|
|
|
|
void IRDaikin2::setLight(const uint8_t light) {
|
|
setBits(&remote_state[7], kDaikin2LightOffset, kDaikin2LightSize, light);
|
|
}
|
|
|
|
void IRDaikin2::setMold(const bool on) {
|
|
setBit(&remote_state[8], kDaikin2BitMoldOffset, on);
|
|
}
|
|
|
|
bool IRDaikin2::getMold(void) {
|
|
return GETBIT8(remote_state[8], kDaikin2BitMoldOffset);
|
|
}
|
|
|
|
// Auto clean setting.
|
|
void IRDaikin2::setClean(const bool on) {
|
|
setBit(&remote_state[8], kDaikin2BitCleanOffset, on);
|
|
}
|
|
|
|
bool IRDaikin2::getClean(void) {
|
|
return GETBIT8(remote_state[8], kDaikin2BitCleanOffset);
|
|
}
|
|
|
|
// Fresh Air settings.
|
|
void IRDaikin2::setFreshAir(const bool on) {
|
|
setBit(&remote_state[8], kDaikin2BitFreshAirOffset, on);
|
|
}
|
|
|
|
bool IRDaikin2::getFreshAir(void) {
|
|
return GETBIT8(remote_state[8], kDaikin2BitFreshAirOffset);
|
|
}
|
|
|
|
void IRDaikin2::setFreshAirHigh(const bool on) {
|
|
setBit(&remote_state[8], kDaikin2BitFreshAirHighOffset, on);
|
|
}
|
|
|
|
bool IRDaikin2::getFreshAirHigh(void) {
|
|
return GETBIT8(remote_state[8], kDaikin2BitFreshAirHighOffset);
|
|
}
|
|
|
|
void IRDaikin2::setEyeAuto(bool on) {
|
|
setBit(&remote_state[13], kDaikin2BitEyeAutoOffset, on);
|
|
}
|
|
|
|
bool IRDaikin2::getEyeAuto(void) {
|
|
return GETBIT8(remote_state[13], kDaikin2BitEyeAutoOffset);
|
|
}
|
|
|
|
void IRDaikin2::setEye(bool on) {
|
|
setBit(&remote_state[36], kDaikin2BitEyeOffset, on);
|
|
}
|
|
|
|
bool IRDaikin2::getEye(void) {
|
|
return GETBIT8(remote_state[36], kDaikin2BitEyeOffset);
|
|
}
|
|
|
|
void IRDaikin2::setEcono(bool on) {
|
|
setBit(&remote_state[36], kDaikinBitEconoOffset, on);
|
|
}
|
|
|
|
bool IRDaikin2::getEcono(void) {
|
|
return GETBIT8(remote_state[36], kDaikinBitEconoOffset);
|
|
}
|
|
|
|
// sleeptime: Number of minutes.
|
|
// Note: Timer location is shared with On Timer.
|
|
void IRDaikin2::enableSleepTimer(const uint16_t sleeptime) {
|
|
enableOnTimer(sleeptime);
|
|
clearOnTimerFlag();
|
|
// Set the Sleep Timer flag.
|
|
setBit(&remote_state[36], kDaikin2BitSleepTimerOffset);
|
|
}
|
|
|
|
void IRDaikin2::clearSleepTimerFlag(void) {
|
|
setBit(&remote_state[36], kDaikin2BitSleepTimerOffset, false);
|
|
}
|
|
|
|
void IRDaikin2::disableSleepTimer(void) {
|
|
disableOnTimer();
|
|
}
|
|
|
|
uint16_t IRDaikin2::getSleepTime(void) {
|
|
return getOnTime();
|
|
}
|
|
|
|
bool IRDaikin2::getSleepTimerEnabled(void) {
|
|
return GETBIT8(remote_state[36], kDaikin2BitSleepTimerOffset);
|
|
}
|
|
|
|
void IRDaikin2::setQuiet(const bool on) {
|
|
setBit(&remote_state[33], kDaikinBitSilentOffset, on);
|
|
// Powerful & Quiet mode being on are mutually exclusive.
|
|
if (on) setPowerful(false);
|
|
}
|
|
|
|
bool IRDaikin2::getQuiet(void) {
|
|
return GETBIT8(remote_state[33], kDaikinBitSilentOffset);
|
|
}
|
|
|
|
void IRDaikin2::setPowerful(const bool on) {
|
|
setBit(&remote_state[33], kDaikinBitPowerfulOffset, on);
|
|
// Powerful & Quiet mode being on are mutually exclusive.
|
|
if (on) setQuiet(false);
|
|
}
|
|
|
|
bool IRDaikin2::getPowerful(void) {
|
|
return GETBIT8(remote_state[33], kDaikinBitPowerfulOffset);
|
|
}
|
|
|
|
void IRDaikin2::setPurify(const bool on) {
|
|
setBit(&remote_state[36], kDaikin2BitPurifyOffset, on);
|
|
}
|
|
|
|
bool IRDaikin2::getPurify(void) {
|
|
return GETBIT8(remote_state[36], kDaikin2BitPurifyOffset);
|
|
}
|
|
|
|
// Convert a standard A/C mode into its native mode.
|
|
uint8_t IRDaikin2::convertMode(const stdAc::opmode_t mode) {
|
|
return IRDaikinESP::convertMode(mode);
|
|
}
|
|
|
|
// Convert a standard A/C Fan speed into its native fan speed.
|
|
uint8_t IRDaikin2::convertFan(const stdAc::fanspeed_t speed) {
|
|
return IRDaikinESP::convertFan(speed);
|
|
}
|
|
|
|
// Convert a standard A/C horizontal swing into its native version.
|
|
uint8_t IRDaikin2::convertSwingH(const stdAc::swingh_t position) {
|
|
switch (position) {
|
|
case stdAc::swingh_t::kAuto: return kDaikin2SwingHSwing;
|
|
case stdAc::swingh_t::kLeftMax: return kDaikin2SwingHLeftMax;
|
|
case stdAc::swingh_t::kLeft: return kDaikin2SwingHLeft;
|
|
case stdAc::swingh_t::kMiddle: return kDaikin2SwingHMiddle;
|
|
case stdAc::swingh_t::kRight: return kDaikin2SwingHRight;
|
|
case stdAc::swingh_t::kRightMax: return kDaikin2SwingHRightMax;
|
|
case stdAc::swingh_t::kWide: return kDaikin2SwingHWide;
|
|
default: return kDaikin2SwingHAuto;
|
|
}
|
|
}
|
|
|
|
// Convert a native horizontal swing to it's common equivalent.
|
|
stdAc::swingh_t IRDaikin2::toCommonSwingH(const uint8_t setting) {
|
|
switch (setting) {
|
|
case kDaikin2SwingHSwing: return stdAc::swingh_t::kAuto;
|
|
case kDaikin2SwingHLeftMax: return stdAc::swingh_t::kLeftMax;
|
|
case kDaikin2SwingHLeft: return stdAc::swingh_t::kLeft;
|
|
case kDaikin2SwingHMiddle: return stdAc::swingh_t::kMiddle;
|
|
case kDaikin2SwingHRight: return stdAc::swingh_t::kRight;
|
|
case kDaikin2SwingHRightMax: return stdAc::swingh_t::kRightMax;
|
|
case kDaikin2SwingHWide: return stdAc::swingh_t::kWide;
|
|
default: return stdAc::swingh_t::kOff;
|
|
}
|
|
}
|
|
|
|
// Convert the A/C state to it's common equivalent.
|
|
stdAc::state_t IRDaikin2::toCommon(void) {
|
|
stdAc::state_t result;
|
|
result.protocol = decode_type_t::DAIKIN2;
|
|
result.model = -1; // No models used.
|
|
result.power = this->getPower();
|
|
result.mode = IRDaikinESP::toCommonMode(this->getMode());
|
|
result.celsius = true;
|
|
result.degrees = this->getTemp();
|
|
result.fanspeed = IRDaikinESP::toCommonFanSpeed(this->getFan());
|
|
result.swingv = this->toCommonSwingV(this->getSwingVertical());
|
|
result.swingh = this->toCommonSwingH(this->getSwingHorizontal());
|
|
result.quiet = this->getQuiet();
|
|
result.light = this->getLight() != 3; // 3 is Off, everything else is On.
|
|
result.turbo = this->getPowerful();
|
|
result.clean = this->getMold();
|
|
result.econo = this->getEcono();
|
|
result.filter = this->getPurify();
|
|
result.beep = this->getBeep() != 3; // 3 is Off, everything else is On.
|
|
result.sleep = this->getSleepTimerEnabled() ? this->getSleepTime() : -1;
|
|
// Not supported.
|
|
result.clock = -1;
|
|
return result;
|
|
}
|
|
|
|
// Convert the internal state into a human readable string.
|
|
String IRDaikin2::toString(void) {
|
|
String result = "";
|
|
result.reserve(310); // Reserve some heap for the string to reduce fragging.
|
|
result += addBoolToString(getPower(), kPowerStr, false);
|
|
result += addModeToString(getMode(), kDaikinAuto, kDaikinCool, kDaikinHeat,
|
|
kDaikinDry, kDaikinFan);
|
|
result += addTempToString(getTemp());
|
|
result += addFanToString(getFan(), kDaikinFanMax, kDaikinFanMin,
|
|
kDaikinFanAuto, kDaikinFanQuiet, kDaikinFanMed);
|
|
result += addIntToString(getSwingVertical(), kSwingVStr);
|
|
result += kSpaceLBraceStr;
|
|
switch (getSwingVertical()) {
|
|
case kDaikin2SwingVHigh:
|
|
result += kHighestStr;
|
|
break;
|
|
case 2: result += kHighStr; break;
|
|
case 3: result += kUpperStr + kMiddleStr; break;
|
|
case 4: result += kLowerStr + kMiddleStr; break;
|
|
case 5: result += kLowStr; break;
|
|
break;
|
|
case kDaikin2SwingVLow:
|
|
result += kLowestStr;
|
|
break;
|
|
case kDaikin2SwingVBreeze:
|
|
result += kBreezeStr;
|
|
break;
|
|
case kDaikin2SwingVCirculate:
|
|
result += kCirculateStr;
|
|
break;
|
|
case kDaikin2SwingVAuto:
|
|
result += kAutoStr;
|
|
break;
|
|
case kDaikin2SwingVSwing:
|
|
result += kSwingStr;
|
|
break;
|
|
default:
|
|
result += kUnknownStr;
|
|
}
|
|
result += ')';
|
|
result += addIntToString(getSwingHorizontal(), kSwingHStr);
|
|
result += kSpaceLBraceStr;
|
|
switch (getSwingHorizontal()) {
|
|
case kDaikin2SwingHAuto:
|
|
result += kAutoStr;
|
|
break;
|
|
case kDaikin2SwingHSwing:
|
|
result += kSwingStr;
|
|
break;
|
|
default: result += kUnknownStr;
|
|
}
|
|
result += ')';
|
|
result += addLabeledString(minsToString(getCurrentTime()), kClockStr);
|
|
result += addLabeledString(
|
|
getOnTimerEnabled() ? minsToString(getOnTime()) : kOffStr, kOnTimerStr);
|
|
result += addLabeledString(
|
|
getOffTimerEnabled() ? minsToString(getOffTime()) : kOffStr,
|
|
kOffTimerStr);
|
|
result += addLabeledString(
|
|
getSleepTimerEnabled() ? minsToString(getSleepTime()) : kOffStr,
|
|
kSleepStr + ' ' + kTimerStr);
|
|
result += addIntToString(getBeep(), kBeepStr);
|
|
result += kSpaceLBraceStr;
|
|
switch (getBeep()) {
|
|
case kDaikinBeepLoud:
|
|
result += kLoudStr;
|
|
break;
|
|
case kDaikinBeepQuiet:
|
|
result += kQuietStr;
|
|
break;
|
|
case kDaikinBeepOff:
|
|
result += kOffStr;
|
|
break;
|
|
default:
|
|
result += kUnknownStr;
|
|
}
|
|
result += ')';
|
|
result += addIntToString(getLight(), kLightStr);
|
|
result += kSpaceLBraceStr;
|
|
switch (getLight()) {
|
|
case kDaikinLightBright:
|
|
result += kHighStr;
|
|
break;
|
|
case kDaikinLightDim:
|
|
result += kLowStr;
|
|
break;
|
|
case kDaikinLightOff:
|
|
result += kOffStr;
|
|
break;
|
|
default:
|
|
result += kUnknownStr;
|
|
}
|
|
result += ')';
|
|
result += addBoolToString(getMold(), kMouldStr);
|
|
result += addBoolToString(getClean(), kCleanStr);
|
|
result += addLabeledString(
|
|
getFreshAir() ? (getFreshAirHigh() ? kHighStr : kOnStr) : kOffStr,
|
|
kFreshStr);
|
|
result += addBoolToString(getEye(), kEyeStr);
|
|
result += addBoolToString(getEyeAuto(), kEyeStr + ' ' + kAutoStr);
|
|
result += addBoolToString(getQuiet(), kQuietStr);
|
|
result += addBoolToString(getPowerful(), kPowerfulStr);
|
|
result += addBoolToString(getPurify(), kPurifyStr);
|
|
result += addBoolToString(getEcono(), kEconoStr);
|
|
return result;
|
|
}
|
|
|
|
#if DECODE_DAIKIN2
|
|
// Decode the supplied Daikin2 A/C message.
|
|
// Args:
|
|
// results: Ptr to the data to decode and where to store the decode result.
|
|
// nbits: Nr. of bits to expect in the data portion. (kDaikin2Bits)
|
|
// strict: Flag to indicate if we strictly adhere to the specification.
|
|
// Returns:
|
|
// boolean: True if it can decode it, false if it can't.
|
|
//
|
|
// Supported devices:
|
|
// - Daikin FTXZ25NV1B, FTXZ35NV1B, FTXZ50NV1B Aircon
|
|
// - Daikin ARC477A1 remote
|
|
//
|
|
// Status: BETA / Work as expected.
|
|
//
|
|
// Ref:
|
|
// https://github.com/mharizanov/Daikin-AC-remote-control-over-the-Internet/tree/master/IRremote
|
|
bool IRrecv::decodeDaikin2(decode_results *results, uint16_t nbits,
|
|
bool strict) {
|
|
if (results->rawlen < 2 * (nbits + kHeader + kFooter) + kHeader - 1)
|
|
return false;
|
|
|
|
// Compliance
|
|
if (strict && nbits != kDaikin2Bits) return false;
|
|
|
|
uint16_t offset = kStartOffset;
|
|
const uint8_t ksectionSize[kDaikin2Sections] = {kDaikin2Section1Length,
|
|
kDaikin2Section2Length};
|
|
|
|
// Leader
|
|
if (!matchMark(results->rawbuf[offset++], kDaikin2LeaderMark,
|
|
_tolerance + kDaikin2Tolerance)) return false;
|
|
if (!matchSpace(results->rawbuf[offset++], kDaikin2LeaderSpace,
|
|
_tolerance + kDaikin2Tolerance)) return false;
|
|
|
|
// Sections
|
|
uint16_t pos = 0;
|
|
for (uint8_t section = 0; section < kDaikin2Sections; section++) {
|
|
uint16_t used;
|
|
// Section Header + Section Data + Section Footer
|
|
used = matchGeneric(results->rawbuf + offset, results->state + pos,
|
|
results->rawlen - offset, ksectionSize[section] * 8,
|
|
kDaikin2HdrMark, kDaikin2HdrSpace,
|
|
kDaikin2BitMark, kDaikin2OneSpace,
|
|
kDaikin2BitMark, kDaikin2ZeroSpace,
|
|
kDaikin2BitMark, kDaikin2Gap,
|
|
section >= kDaikin2Sections - 1,
|
|
_tolerance + kDaikin2Tolerance, kDaikinMarkExcess,
|
|
false);
|
|
if (used == 0) return false;
|
|
offset += used;
|
|
pos += ksectionSize[section];
|
|
}
|
|
// Compliance
|
|
if (strict) {
|
|
// Re-check we got the correct size/length due to the way we read the data.
|
|
if (pos * 8 != kDaikin2Bits) return false;
|
|
// Validate the checksum.
|
|
if (!IRDaikin2::validChecksum(results->state)) return false;
|
|
}
|
|
|
|
// Success
|
|
results->decode_type = DAIKIN2;
|
|
results->bits = nbits;
|
|
// No need to record the state as we stored it as we decoded it.
|
|
// As we use result->state, we don't record value, address, or command as it
|
|
// is a union data type.
|
|
return true;
|
|
}
|
|
#endif // DECODE_DAIKIN2
|
|
|
|
#if SEND_DAIKIN216
|
|
// Send a Daikin 216 bit A/C message.
|
|
//
|
|
// Args:
|
|
// data: An array of kDaikin216StateLength bytes containing the IR command.
|
|
//
|
|
// Status: Alpha/Untested on a real device.
|
|
//
|
|
// Supported devices:
|
|
// - Daikin ARC433B69 remote.
|
|
//
|
|
// Ref:
|
|
// https://github.com/crankyoldgit/IRremoteESP8266/issues/689
|
|
// https://github.com/danny-source/Arduino_DY_IRDaikin
|
|
void IRsend::sendDaikin216(const unsigned char data[], const uint16_t nbytes,
|
|
const uint16_t repeat) {
|
|
if (nbytes < kDaikin216Section1Length)
|
|
return; // Not enough bytes to send a partial message.
|
|
|
|
for (uint16_t r = 0; r <= repeat; r++) {
|
|
// Section #1
|
|
sendGeneric(kDaikin216HdrMark, kDaikin216HdrSpace, kDaikin216BitMark,
|
|
kDaikin216OneSpace, kDaikin216BitMark, kDaikin216ZeroSpace,
|
|
kDaikin216BitMark, kDaikin216Gap, data,
|
|
kDaikin216Section1Length,
|
|
kDaikin216Freq, false, 0, kDutyDefault);
|
|
// Section #2
|
|
sendGeneric(kDaikin216HdrMark, kDaikin216HdrSpace, kDaikin216BitMark,
|
|
kDaikin216OneSpace, kDaikin216BitMark, kDaikin216ZeroSpace,
|
|
kDaikin216BitMark, kDaikin216Gap,
|
|
data + kDaikin216Section1Length,
|
|
nbytes - kDaikin216Section1Length,
|
|
kDaikin216Freq, false, 0, kDutyDefault);
|
|
}
|
|
}
|
|
#endif // SEND_DAIKIN216
|
|
|
|
// Class for handling Daikin 216 bit / 27 byte A/C messages.
|
|
//
|
|
// Code by crankyoldgit.
|
|
//
|
|
// Supported Remotes: Daikin ARC433B69 remote
|
|
//
|
|
// Ref:
|
|
// https://github.com/crankyoldgit/IRremoteESP8266/issues/689
|
|
// https://github.com/danny-source/Arduino_DY_IRDaikin
|
|
IRDaikin216::IRDaikin216(const uint16_t pin, const bool inverted,
|
|
const bool use_modulation)
|
|
: _irsend(pin, inverted, use_modulation) { stateReset(); }
|
|
|
|
void IRDaikin216::begin(void) { _irsend.begin(); }
|
|
|
|
#if SEND_DAIKIN216
|
|
void IRDaikin216::send(const uint16_t repeat) {
|
|
_irsend.sendDaikin216(getRaw(), kDaikin216StateLength, repeat);
|
|
}
|
|
#endif // SEND_DAIKIN216
|
|
|
|
// Verify the checksum is valid for a given state.
|
|
// Args:
|
|
// state: The array to verify the checksum of.
|
|
// length: The size of the state.
|
|
// Returns:
|
|
// A boolean.
|
|
bool IRDaikin216::validChecksum(uint8_t state[], const uint16_t length) {
|
|
// Validate the checksum of section #1.
|
|
if (length <= kDaikin216Section1Length - 1 ||
|
|
state[kDaikin216Section1Length - 1] != sumBytes(
|
|
state, kDaikin216Section1Length - 1))
|
|
return false;
|
|
// Validate the checksum of section #2 (a.k.a. the rest)
|
|
if (length <= kDaikin216Section1Length + 1 ||
|
|
state[length - 1] != sumBytes(state + kDaikin216Section1Length,
|
|
length - kDaikin216Section1Length - 1))
|
|
return false;
|
|
return true;
|
|
}
|
|
|
|
// Calculate and set the checksum values for the internal state.
|
|
void IRDaikin216::checksum(void) {
|
|
remote_state[kDaikin216Section1Length - 1] = sumBytes(
|
|
remote_state, kDaikin216Section1Length - 1);
|
|
remote_state[kDaikin216StateLength - 1] = sumBytes(
|
|
remote_state + kDaikin216Section1Length, kDaikin216Section2Length - 1);
|
|
}
|
|
|
|
void IRDaikin216::stateReset(void) {
|
|
for (uint8_t i = 0; i < kDaikin216StateLength; i++) remote_state[i] = 0x00;
|
|
remote_state[0] = 0x11;
|
|
remote_state[1] = 0xDA;
|
|
remote_state[2] = 0x27;
|
|
remote_state[3] = 0xF0;
|
|
// remote_state[7] is a checksum byte, it will be set by checksum().
|
|
remote_state[8] = 0x11;
|
|
remote_state[9] = 0xDA;
|
|
remote_state[10] = 0x27;
|
|
remote_state[23] = 0xC0;
|
|
// remote_state[26] is a checksum byte, it will be set by checksum().
|
|
}
|
|
|
|
uint8_t *IRDaikin216::getRaw(void) {
|
|
checksum(); // Ensure correct settings before sending.
|
|
return remote_state;
|
|
}
|
|
|
|
void IRDaikin216::setRaw(const uint8_t new_code[]) {
|
|
memcpy(remote_state, new_code, kDaikin216StateLength);
|
|
}
|
|
|
|
void IRDaikin216::on(void) { setPower(true); }
|
|
|
|
void IRDaikin216::off(void) { setPower(false); }
|
|
|
|
void IRDaikin216::setPower(const bool on) {
|
|
setBit(&remote_state[kDaikin216BytePower], kDaikinBitPowerOffset, on);
|
|
}
|
|
|
|
bool IRDaikin216::getPower(void) {
|
|
return GETBIT8(remote_state[kDaikin216BytePower], kDaikinBitPowerOffset);
|
|
}
|
|
|
|
uint8_t IRDaikin216::getMode(void) {
|
|
return GETBITS8(remote_state[kDaikin216ByteMode], kHighNibble, kModeBitsSize);
|
|
}
|
|
|
|
void IRDaikin216::setMode(const uint8_t mode) {
|
|
switch (mode) {
|
|
case kDaikinAuto:
|
|
case kDaikinCool:
|
|
case kDaikinHeat:
|
|
case kDaikinFan:
|
|
case kDaikinDry:
|
|
setBits(&remote_state[kDaikin216ByteMode], kHighNibble, kModeBitsSize,
|
|
mode);
|
|
break;
|
|
default:
|
|
this->setMode(kDaikinAuto);
|
|
}
|
|
}
|
|
|
|
// Convert a standard A/C mode into its native mode.
|
|
uint8_t IRDaikin216::convertMode(const stdAc::opmode_t mode) {
|
|
return IRDaikinESP::convertMode(mode);
|
|
}
|
|
|
|
// Set the temp in deg C
|
|
void IRDaikin216::setTemp(const uint8_t temp) {
|
|
uint8_t degrees = std::max(temp, kDaikinMinTemp);
|
|
degrees = std::min(degrees, kDaikinMaxTemp);
|
|
setBits(&remote_state[kDaikin216ByteTemp], kDaikin216TempOffset,
|
|
kDaikin216TempSize, degrees);
|
|
}
|
|
|
|
uint8_t IRDaikin216::getTemp(void) {
|
|
return GETBITS8(remote_state[kDaikin216ByteTemp], kDaikin216TempOffset,
|
|
kDaikin216TempSize);
|
|
}
|
|
|
|
// Set the speed of the fan, 1-5 or kDaikinFanAuto or kDaikinFanQuiet
|
|
void IRDaikin216::setFan(const uint8_t fan) {
|
|
// Set the fan speed bits, leave low 4 bits alone
|
|
uint8_t fanset;
|
|
if (fan == kDaikinFanQuiet || fan == kDaikinFanAuto)
|
|
fanset = fan;
|
|
else if (fan < kDaikinFanMin || fan > kDaikinFanMax)
|
|
fanset = kDaikinFanAuto;
|
|
else
|
|
fanset = 2 + fan;
|
|
setBits(&remote_state[kDaikin216ByteFan], kHighNibble, kDaikinFanSize,
|
|
fanset);
|
|
}
|
|
|
|
uint8_t IRDaikin216::getFan(void) {
|
|
uint8_t fan = GETBITS8(remote_state[kDaikin216ByteFan], kHighNibble,
|
|
kDaikinFanSize);
|
|
if (fan != kDaikinFanQuiet && fan != kDaikinFanAuto) fan -= 2;
|
|
return fan;
|
|
}
|
|
|
|
// Convert a standard A/C Fan speed into its native fan speed.
|
|
uint8_t IRDaikin216::convertFan(const stdAc::fanspeed_t speed) {
|
|
return IRDaikinESP::convertFan(speed);
|
|
}
|
|
|
|
void IRDaikin216::setSwingVertical(const bool on) {
|
|
setBits(&remote_state[kDaikin216ByteSwingV], kLowNibble, kDaikin216SwingSize,
|
|
on ? kDaikin216SwingOn : kDaikin216SwingOff);
|
|
}
|
|
|
|
bool IRDaikin216::getSwingVertical(void) {
|
|
return GETBITS8(remote_state[kDaikin216ByteSwingV], kLowNibble,
|
|
kDaikin216SwingSize);
|
|
}
|
|
|
|
void IRDaikin216::setSwingHorizontal(const bool on) {
|
|
setBits(&remote_state[kDaikin216ByteSwingH], kLowNibble, kDaikin216SwingSize,
|
|
on ? kDaikin216SwingOn : kDaikin216SwingOff);
|
|
}
|
|
|
|
bool IRDaikin216::getSwingHorizontal(void) {
|
|
return GETBITS8(remote_state[kDaikin216ByteSwingH], kLowNibble,
|
|
kDaikin216SwingSize);
|
|
}
|
|
|
|
// This is a horrible hack till someone works out the quiet mode bit.
|
|
void IRDaikin216::setQuiet(const bool on) {
|
|
if (on) {
|
|
this->setFan(kDaikinFanQuiet);
|
|
// Powerful & Quiet mode being on are mutually exclusive.
|
|
this->setPowerful(false);
|
|
} else if (this->getFan() == kDaikinFanQuiet) {
|
|
this->setFan(kDaikinFanAuto);
|
|
}
|
|
}
|
|
|
|
// This is a horrible hack till someone works out the quiet mode bit.
|
|
bool IRDaikin216::getQuiet(void) {
|
|
return this->getFan() == kDaikinFanQuiet;
|
|
}
|
|
|
|
void IRDaikin216::setPowerful(const bool on) {
|
|
setBit(&remote_state[kDaikin216BytePowerful], kDaikinBitPowerfulOffset, on);
|
|
// Powerful & Quiet mode being on are mutually exclusive.
|
|
if (on) this->setQuiet(false);
|
|
}
|
|
|
|
bool IRDaikin216::getPowerful(void) {
|
|
return GETBIT8(remote_state[kDaikin216BytePowerful],
|
|
kDaikinBitPowerfulOffset);
|
|
}
|
|
|
|
// Convert the A/C state to it's common equivalent.
|
|
stdAc::state_t IRDaikin216::toCommon(void) {
|
|
stdAc::state_t result;
|
|
result.protocol = decode_type_t::DAIKIN216;
|
|
result.model = -1; // No models used.
|
|
result.power = this->getPower();
|
|
result.mode = IRDaikinESP::toCommonMode(this->getMode());
|
|
result.celsius = true;
|
|
result.degrees = this->getTemp();
|
|
result.fanspeed = IRDaikinESP::toCommonFanSpeed(this->getFan());
|
|
result.swingv = this->getSwingVertical() ? stdAc::swingv_t::kAuto :
|
|
stdAc::swingv_t::kOff;
|
|
result.swingh = this->getSwingHorizontal() ? stdAc::swingh_t::kAuto :
|
|
stdAc::swingh_t::kOff;
|
|
result.quiet = this->getQuiet();
|
|
result.turbo = this->getPowerful();
|
|
// Not supported.
|
|
result.light = false;
|
|
result.clean = false;
|
|
result.econo = false;
|
|
result.filter = false;
|
|
result.beep = false;
|
|
result.sleep = -1;
|
|
result.clock = -1;
|
|
return result;
|
|
}
|
|
|
|
// Convert the internal state into a human readable string.
|
|
String IRDaikin216::toString(void) {
|
|
String result = "";
|
|
result.reserve(120); // Reserve some heap for the string to reduce fragging.
|
|
result += addBoolToString(getPower(), kPowerStr, false);
|
|
result += addModeToString(getMode(), kDaikinAuto, kDaikinCool, kDaikinHeat,
|
|
kDaikinDry, kDaikinFan);
|
|
result += addTempToString(getTemp());
|
|
result += addFanToString(getFan(), kDaikinFanMax, kDaikinFanMin,
|
|
kDaikinFanAuto, kDaikinFanQuiet, kDaikinFanMed);
|
|
result += addBoolToString(getSwingHorizontal(), kSwingHStr);
|
|
result += addBoolToString(getSwingVertical(), kSwingVStr);
|
|
result += addBoolToString(getQuiet(), kQuietStr);
|
|
result += addBoolToString(getPowerful(), kPowerfulStr);
|
|
return result;
|
|
}
|
|
|
|
#if DECODE_DAIKIN216
|
|
// Decode the supplied Daikin 216 bit A/C message.
|
|
// Args:
|
|
// results: Ptr to the data to decode and where to store the decode result.
|
|
// nbits: Nr. of bits to expect in the data portion. (kDaikin216Bits)
|
|
// strict: Flag to indicate if we strictly adhere to the specification.
|
|
// Returns:
|
|
// boolean: True if it can decode it, false if it can't.
|
|
//
|
|
// Supported devices:
|
|
// - Daikin ARC433B69 remote.
|
|
//
|
|
// Status: BETA / Should be working.
|
|
//
|
|
// Ref:
|
|
// https://github.com/crankyoldgit/IRremoteESP8266/issues/689
|
|
// https://github.com/danny-source/Arduino_DY_IRDaikin
|
|
bool IRrecv::decodeDaikin216(decode_results *results, const uint16_t nbits,
|
|
const bool strict) {
|
|
if (results->rawlen < 2 * (nbits + kHeader + kFooter) - 1)
|
|
return false;
|
|
|
|
// Compliance
|
|
if (strict && nbits != kDaikin216Bits) return false;
|
|
|
|
uint16_t offset = kStartOffset;
|
|
const uint8_t ksectionSize[kDaikin216Sections] = {kDaikin216Section1Length,
|
|
kDaikin216Section2Length};
|
|
// Sections
|
|
uint16_t pos = 0;
|
|
for (uint8_t section = 0; section < kDaikin216Sections; section++) {
|
|
uint16_t used;
|
|
// Section Header + Section Data + Section Footer
|
|
used = matchGeneric(results->rawbuf + offset, results->state + pos,
|
|
results->rawlen - offset, ksectionSize[section] * 8,
|
|
kDaikin216HdrMark, kDaikin216HdrSpace,
|
|
kDaikin216BitMark, kDaikin216OneSpace,
|
|
kDaikin216BitMark, kDaikin216ZeroSpace,
|
|
kDaikin216BitMark, kDaikin216Gap,
|
|
section >= kDaikin216Sections - 1,
|
|
kDaikinTolerance, kDaikinMarkExcess, false);
|
|
if (used == 0) return false;
|
|
offset += used;
|
|
pos += ksectionSize[section];
|
|
}
|
|
// Compliance
|
|
if (strict) {
|
|
if (pos * 8 != kDaikin216Bits) return false;
|
|
// Validate the checksum.
|
|
if (!IRDaikin216::validChecksum(results->state)) return false;
|
|
}
|
|
|
|
// Success
|
|
results->decode_type = decode_type_t::DAIKIN216;
|
|
results->bits = nbits;
|
|
// No need to record the state as we stored it as we decoded it.
|
|
// As we use result->state, we don't record value, address, or command as it
|
|
// is a union data type.
|
|
return true;
|
|
}
|
|
#endif // DECODE_DAIKIN216
|
|
|
|
#if SEND_DAIKIN160
|
|
// Send a Daikin 160 bit A/C message.
|
|
//
|
|
// Args:
|
|
// data: An array of kDaikin160StateLength bytes containing the IR command.
|
|
//
|
|
// Status: STABLE / Confirmed working.
|
|
//
|
|
// Supported devices:
|
|
// - Daikin ARC423A5 remote.
|
|
//
|
|
// Ref:
|
|
// https://github.com/crankyoldgit/IRremoteESP8266/issues/731
|
|
void IRsend::sendDaikin160(const unsigned char data[], const uint16_t nbytes,
|
|
const uint16_t repeat) {
|
|
if (nbytes < kDaikin160Section1Length)
|
|
return; // Not enough bytes to send a partial message.
|
|
|
|
for (uint16_t r = 0; r <= repeat; r++) {
|
|
// Section #1
|
|
sendGeneric(kDaikin160HdrMark, kDaikin160HdrSpace, kDaikin160BitMark,
|
|
kDaikin160OneSpace, kDaikin160BitMark, kDaikin160ZeroSpace,
|
|
kDaikin160BitMark, kDaikin160Gap, data,
|
|
kDaikin160Section1Length,
|
|
kDaikin160Freq, false, 0, kDutyDefault);
|
|
// Section #2
|
|
sendGeneric(kDaikin160HdrMark, kDaikin160HdrSpace, kDaikin160BitMark,
|
|
kDaikin160OneSpace, kDaikin160BitMark, kDaikin160ZeroSpace,
|
|
kDaikin160BitMark, kDaikin160Gap,
|
|
data + kDaikin160Section1Length,
|
|
nbytes - kDaikin160Section1Length,
|
|
kDaikin160Freq, false, 0, kDutyDefault);
|
|
}
|
|
}
|
|
#endif // SEND_DAIKIN160
|
|
|
|
// Class for handling Daikin 160 bit / 20 byte A/C messages.
|
|
//
|
|
// Code by crankyoldgit.
|
|
//
|
|
// Supported Remotes: Daikin ARC423A5 remote
|
|
//
|
|
// Ref:
|
|
// https://github.com/crankyoldgit/IRremoteESP8266/issues/731
|
|
IRDaikin160::IRDaikin160(const uint16_t pin, const bool inverted,
|
|
const bool use_modulation)
|
|
: _irsend(pin, inverted, use_modulation) { stateReset(); }
|
|
|
|
void IRDaikin160::begin(void) { _irsend.begin(); }
|
|
|
|
// Verify the checksum is valid for a given state.
|
|
// Args:
|
|
// state: The array to verify the checksum of.
|
|
// length: The size of the state.
|
|
// Returns:
|
|
// A boolean.
|
|
bool IRDaikin160::validChecksum(uint8_t state[], const uint16_t length) {
|
|
// Validate the checksum of section #1.
|
|
if (length <= kDaikin160Section1Length - 1 ||
|
|
state[kDaikin160Section1Length - 1] != sumBytes(
|
|
state, kDaikin160Section1Length - 1))
|
|
return false;
|
|
// Validate the checksum of section #2 (a.k.a. the rest)
|
|
if (length <= kDaikin160Section1Length + 1 ||
|
|
state[length - 1] != sumBytes(state + kDaikin160Section1Length,
|
|
length - kDaikin160Section1Length - 1))
|
|
return false;
|
|
return true;
|
|
}
|
|
|
|
// Calculate and set the checksum values for the internal state.
|
|
void IRDaikin160::checksum(void) {
|
|
remote_state[kDaikin160Section1Length - 1] = sumBytes(
|
|
remote_state, kDaikin160Section1Length - 1);
|
|
remote_state[kDaikin160StateLength - 1] = sumBytes(
|
|
remote_state + kDaikin160Section1Length, kDaikin160Section2Length - 1);
|
|
}
|
|
|
|
void IRDaikin160::stateReset(void) {
|
|
for (uint8_t i = 0; i < kDaikin160StateLength; i++) remote_state[i] = 0x00;
|
|
remote_state[0] = 0x11;
|
|
remote_state[1] = 0xDA;
|
|
remote_state[2] = 0x27;
|
|
remote_state[3] = 0xF0;
|
|
remote_state[4] = 0x0D;
|
|
// remote_state[6] is a checksum byte, it will be set by checksum().
|
|
remote_state[7] = 0x11;
|
|
remote_state[8] = 0xDA;
|
|
remote_state[9] = 0x27;
|
|
remote_state[11] = 0xD3;
|
|
remote_state[12] = 0x30;
|
|
remote_state[13] = 0x11;
|
|
remote_state[16] = 0x1E;
|
|
remote_state[17] = 0x0A;
|
|
remote_state[18] = 0x08;
|
|
// remote_state[19] is a checksum byte, it will be set by checksum().
|
|
}
|
|
|
|
uint8_t *IRDaikin160::getRaw(void) {
|
|
checksum(); // Ensure correct settings before sending.
|
|
return remote_state;
|
|
}
|
|
|
|
void IRDaikin160::setRaw(const uint8_t new_code[]) {
|
|
memcpy(remote_state, new_code, kDaikin160StateLength);
|
|
}
|
|
|
|
#if SEND_DAIKIN160
|
|
void IRDaikin160::send(const uint16_t repeat) {
|
|
_irsend.sendDaikin160(getRaw(), kDaikin160StateLength, repeat);
|
|
}
|
|
#endif // SEND_DAIKIN160
|
|
|
|
void IRDaikin160::on(void) { setPower(true); }
|
|
|
|
void IRDaikin160::off(void) { setPower(false); }
|
|
|
|
void IRDaikin160::setPower(const bool on) {
|
|
setBit(&remote_state[kDaikin160BytePower], kDaikinBitPowerOffset, on);
|
|
}
|
|
|
|
bool IRDaikin160::getPower(void) {
|
|
return GETBIT8(remote_state[kDaikin160BytePower], kDaikinBitPowerOffset);
|
|
}
|
|
|
|
uint8_t IRDaikin160::getMode(void) {
|
|
return GETBITS8(remote_state[kDaikin160ByteMode], kHighNibble, kModeBitsSize);
|
|
}
|
|
|
|
void IRDaikin160::setMode(const uint8_t mode) {
|
|
switch (mode) {
|
|
case kDaikinAuto:
|
|
case kDaikinCool:
|
|
case kDaikinHeat:
|
|
case kDaikinFan:
|
|
case kDaikinDry:
|
|
setBits(&remote_state[kDaikin160ByteMode], kHighNibble, kModeBitsSize,
|
|
mode);
|
|
break;
|
|
default: this->setMode(kDaikinAuto);
|
|
}
|
|
}
|
|
|
|
// Convert a standard A/C mode into its native mode.
|
|
uint8_t IRDaikin160::convertMode(const stdAc::opmode_t mode) {
|
|
return IRDaikinESP::convertMode(mode);
|
|
}
|
|
|
|
// Set the temp in deg C
|
|
void IRDaikin160::setTemp(const uint8_t temp) {
|
|
uint8_t degrees = std::max(temp, kDaikinMinTemp);
|
|
degrees = std::min(degrees, kDaikinMaxTemp) - 10;
|
|
setBits(&remote_state[kDaikin160ByteTemp], kDaikin160TempOffset,
|
|
kDaikin160TempSize, degrees);
|
|
}
|
|
|
|
uint8_t IRDaikin160::getTemp(void) {
|
|
return GETBITS8(remote_state[kDaikin160ByteTemp], kDaikin160TempOffset,
|
|
kDaikin160TempSize) + 10;
|
|
}
|
|
|
|
// Set the speed of the fan, 1-5 or kDaikinFanAuto or kDaikinFanQuiet
|
|
void IRDaikin160::setFan(const uint8_t fan) {
|
|
uint8_t fanset;
|
|
if (fan == kDaikinFanQuiet || fan == kDaikinFanAuto)
|
|
fanset = fan;
|
|
else if (fan < kDaikinFanMin || fan > kDaikinFanMax)
|
|
fanset = kDaikinFanAuto;
|
|
else
|
|
fanset = 2 + fan;
|
|
// Set the fan speed bits, leave *upper* 4 bits alone
|
|
setBits(&remote_state[kDaikin160ByteFan], kLowNibble, kDaikinFanSize, fanset);
|
|
}
|
|
|
|
uint8_t IRDaikin160::getFan(void) {
|
|
uint8_t fan = GETBITS8(remote_state[kDaikin160ByteFan], kLowNibble,
|
|
kDaikinFanSize);
|
|
if (fan != kDaikinFanQuiet && fan != kDaikinFanAuto) fan -= 2;
|
|
return fan;
|
|
}
|
|
|
|
// Convert a standard A/C Fan speed into its native fan speed.
|
|
uint8_t IRDaikin160::convertFan(const stdAc::fanspeed_t speed) {
|
|
switch (speed) {
|
|
case stdAc::fanspeed_t::kMin: return kDaikinFanMin;
|
|
case stdAc::fanspeed_t::kLow: return kDaikinFanMin + 1;
|
|
case stdAc::fanspeed_t::kMedium: return kDaikinFanMin + 2;
|
|
case stdAc::fanspeed_t::kHigh: return kDaikinFanMax - 1;
|
|
case stdAc::fanspeed_t::kMax: return kDaikinFanMax;
|
|
default:
|
|
return kDaikinFanAuto;
|
|
}
|
|
}
|
|
|
|
void IRDaikin160::setSwingVertical(const uint8_t position) {
|
|
switch (position) {
|
|
case kDaikin160SwingVLowest:
|
|
case kDaikin160SwingVLow:
|
|
case kDaikin160SwingVMiddle:
|
|
case kDaikin160SwingVHigh:
|
|
case kDaikin160SwingVHighest:
|
|
case kDaikin160SwingVAuto:
|
|
setBits(&remote_state[kDaikin160ByteSwingV], kHighNibble,
|
|
kDaikinSwingSize, position);
|
|
break;
|
|
default: setSwingVertical(kDaikin160SwingVAuto);
|
|
}
|
|
}
|
|
|
|
uint8_t IRDaikin160::getSwingVertical(void) {
|
|
return GETBITS8(remote_state[kDaikin160ByteSwingV], kHighNibble,
|
|
kDaikinSwingSize);
|
|
}
|
|
|
|
// Convert a standard A/C vertical swing into its native version.
|
|
uint8_t IRDaikin160::convertSwingV(const stdAc::swingv_t position) {
|
|
switch (position) {
|
|
case stdAc::swingv_t::kHighest:
|
|
case stdAc::swingv_t::kHigh:
|
|
case stdAc::swingv_t::kMiddle:
|
|
case stdAc::swingv_t::kLow:
|
|
case stdAc::swingv_t::kLowest:
|
|
return kDaikin160SwingVHighest + 1 - (uint8_t)position;
|
|
default:
|
|
return kDaikin160SwingVAuto;
|
|
}
|
|
}
|
|
|
|
// Convert a native vertical swing to it's common equivalent.
|
|
stdAc::swingv_t IRDaikin160::toCommonSwingV(const uint8_t setting) {
|
|
switch (setting) {
|
|
case kDaikin160SwingVHighest: return stdAc::swingv_t::kHighest;
|
|
case kDaikin160SwingVHigh: return stdAc::swingv_t::kHigh;
|
|
case kDaikin160SwingVMiddle: return stdAc::swingv_t::kMiddle;
|
|
case kDaikin160SwingVLow: return stdAc::swingv_t::kLow;
|
|
case kDaikin160SwingVLowest: return stdAc::swingv_t::kLowest;
|
|
default:
|
|
return stdAc::swingv_t::kAuto;
|
|
}
|
|
}
|
|
|
|
// Convert the A/C state to it's common equivalent.
|
|
stdAc::state_t IRDaikin160::toCommon(void) {
|
|
stdAc::state_t result;
|
|
result.protocol = decode_type_t::DAIKIN160;
|
|
result.model = -1; // No models used.
|
|
result.power = this->getPower();
|
|
result.mode = IRDaikinESP::toCommonMode(this->getMode());
|
|
result.celsius = true;
|
|
result.degrees = this->getTemp();
|
|
result.fanspeed = IRDaikinESP::toCommonFanSpeed(this->getFan());
|
|
result.swingv = this->toCommonSwingV(this->getSwingVertical());
|
|
// Not supported.
|
|
result.swingh = stdAc::swingh_t::kOff;
|
|
result.quiet = false;
|
|
result.turbo = false;
|
|
result.light = false;
|
|
result.clean = false;
|
|
result.econo = false;
|
|
result.filter = false;
|
|
result.beep = false;
|
|
result.sleep = -1;
|
|
result.clock = -1;
|
|
return result;
|
|
}
|
|
|
|
// Convert the internal state into a human readable string.
|
|
String IRDaikin160::toString(void) {
|
|
String result = "";
|
|
result.reserve(150); // Reserve some heap for the string to reduce fragging.
|
|
result += addBoolToString(getPower(), kPowerStr, false);
|
|
result += addModeToString(getMode(), kDaikinAuto, kDaikinCool, kDaikinHeat,
|
|
kDaikinDry, kDaikinFan);
|
|
result += addTempToString(getTemp());
|
|
result += addFanToString(getFan(), kDaikinFanMax, kDaikinFanMin,
|
|
kDaikinFanAuto, kDaikinFanQuiet, kDaikinFanMed);
|
|
result += addIntToString(getSwingVertical(), kSwingVStr);
|
|
result += kSpaceLBraceStr;
|
|
switch (getSwingVertical()) {
|
|
case kDaikin160SwingVHighest: result += kHighestStr; break;
|
|
case kDaikin160SwingVHigh: result += kHighStr; break;
|
|
case kDaikin160SwingVMiddle: result += kMiddleStr; break;
|
|
case kDaikin160SwingVLow: result += kLowStr; break;
|
|
case kDaikin160SwingVLowest: result += kLowestStr; break;
|
|
case kDaikin160SwingVAuto: result += kAutoStr; break;
|
|
default: result += kUnknownStr;
|
|
}
|
|
result += ')';
|
|
return result;
|
|
}
|
|
|
|
#if DECODE_DAIKIN160
|
|
// Decode the supplied Daikin 160 bit A/C message.
|
|
// Args:
|
|
// results: Ptr to the data to decode and where to store the decode result.
|
|
// nbits: Nr. of bits to expect in the data portion. (kDaikin160Bits)
|
|
// strict: Flag to indicate if we strictly adhere to the specification.
|
|
// Returns:
|
|
// boolean: True if it can decode it, false if it can't.
|
|
//
|
|
// Supported devices:
|
|
// - Daikin ARC423A5 remote.
|
|
//
|
|
// Status: STABLE / Confirmed working.
|
|
//
|
|
// Ref:
|
|
// https://github.com/crankyoldgit/IRremoteESP8266/issues/731
|
|
bool IRrecv::decodeDaikin160(decode_results *results, const uint16_t nbits,
|
|
const bool strict) {
|
|
if (results->rawlen < 2 * (nbits + kHeader + kFooter) - 1)
|
|
return false;
|
|
|
|
// Compliance
|
|
if (strict && nbits != kDaikin160Bits) return false;
|
|
|
|
uint16_t offset = kStartOffset;
|
|
const uint8_t ksectionSize[kDaikin160Sections] = {kDaikin160Section1Length,
|
|
kDaikin160Section2Length};
|
|
|
|
// Sections
|
|
uint16_t pos = 0;
|
|
for (uint8_t section = 0; section < kDaikin160Sections; section++) {
|
|
uint16_t used;
|
|
// Section Header + Section Data (7 bytes) + Section Footer
|
|
used = matchGeneric(results->rawbuf + offset, results->state + pos,
|
|
results->rawlen - offset, ksectionSize[section] * 8,
|
|
kDaikin160HdrMark, kDaikin160HdrSpace,
|
|
kDaikin160BitMark, kDaikin160OneSpace,
|
|
kDaikin160BitMark, kDaikin160ZeroSpace,
|
|
kDaikin160BitMark, kDaikin160Gap,
|
|
section >= kDaikin160Sections - 1,
|
|
kDaikinTolerance, kDaikinMarkExcess, false);
|
|
if (used == 0) return false;
|
|
offset += used;
|
|
pos += ksectionSize[section];
|
|
}
|
|
// Compliance
|
|
if (strict) {
|
|
// Validate the checksum.
|
|
if (!IRDaikin160::validChecksum(results->state)) return false;
|
|
}
|
|
|
|
// Success
|
|
results->decode_type = decode_type_t::DAIKIN160;
|
|
results->bits = nbits;
|
|
// No need to record the state as we stored it as we decoded it.
|
|
// As we use result->state, we don't record value, address, or command as it
|
|
// is a union data type.
|
|
return true;
|
|
}
|
|
#endif // DECODE_DAIKIN160
|
|
|
|
#if SEND_DAIKIN176
|
|
// Send a Daikin 176 bit A/C message.
|
|
//
|
|
// Args:
|
|
// data: An array of kDaikin176StateLength bytes containing the IR command.
|
|
//
|
|
// Status: Alpha/Untested on a real device.
|
|
//
|
|
// Supported devices:
|
|
// - Daikin BRC4C153 remote.
|
|
//
|
|
void IRsend::sendDaikin176(const unsigned char data[], const uint16_t nbytes,
|
|
const uint16_t repeat) {
|
|
if (nbytes < kDaikin176Section1Length)
|
|
return; // Not enough bytes to send a partial message.
|
|
|
|
for (uint16_t r = 0; r <= repeat; r++) {
|
|
// Section #1
|
|
sendGeneric(kDaikin176HdrMark, kDaikin176HdrSpace, kDaikin176BitMark,
|
|
kDaikin176OneSpace, kDaikin176BitMark, kDaikin176ZeroSpace,
|
|
kDaikin176BitMark, kDaikin176Gap, data,
|
|
kDaikin176Section1Length,
|
|
kDaikin176Freq, false, 0, kDutyDefault);
|
|
// Section #2
|
|
sendGeneric(kDaikin176HdrMark, kDaikin176HdrSpace, kDaikin176BitMark,
|
|
kDaikin176OneSpace, kDaikin176BitMark, kDaikin176ZeroSpace,
|
|
kDaikin176BitMark, kDaikin176Gap,
|
|
data + kDaikin176Section1Length,
|
|
nbytes - kDaikin176Section1Length,
|
|
kDaikin176Freq, false, 0, kDutyDefault);
|
|
}
|
|
}
|
|
#endif // SEND_DAIKIN176
|
|
|
|
// Class for handling Daikin 176 bit / 22 byte A/C messages.
|
|
//
|
|
// Code by crankyoldgit.
|
|
//
|
|
// Supported Remotes: Daikin BRC4C153 remote
|
|
//
|
|
IRDaikin176::IRDaikin176(const uint16_t pin, const bool inverted,
|
|
const bool use_modulation)
|
|
: _irsend(pin, inverted, use_modulation) { stateReset(); }
|
|
|
|
void IRDaikin176::begin(void) { _irsend.begin(); }
|
|
|
|
// Verify the checksum is valid for a given state.
|
|
// Args:
|
|
// state: The array to verify the checksum of.
|
|
// length: The size of the state.
|
|
// Returns:
|
|
// A boolean.
|
|
bool IRDaikin176::validChecksum(uint8_t state[], const uint16_t length) {
|
|
// Validate the checksum of section #1.
|
|
if (length <= kDaikin176Section1Length - 1 ||
|
|
state[kDaikin176Section1Length - 1] != sumBytes(
|
|
state, kDaikin176Section1Length - 1))
|
|
return false;
|
|
// Validate the checksum of section #2 (a.k.a. the rest)
|
|
if (length <= kDaikin176Section1Length + 1 ||
|
|
state[length - 1] != sumBytes(state + kDaikin176Section1Length,
|
|
length - kDaikin176Section1Length - 1))
|
|
return false;
|
|
return true;
|
|
}
|
|
|
|
// Calculate and set the checksum values for the internal state.
|
|
void IRDaikin176::checksum(void) {
|
|
remote_state[kDaikin176Section1Length - 1] = sumBytes(
|
|
remote_state, kDaikin176Section1Length - 1);
|
|
remote_state[kDaikin176StateLength - 1] = sumBytes(
|
|
remote_state + kDaikin176Section1Length, kDaikin176Section2Length - 1);
|
|
}
|
|
|
|
void IRDaikin176::stateReset(void) {
|
|
for (uint8_t i = 0; i < kDaikin176StateLength; i++) remote_state[i] = 0x00;
|
|
remote_state[0] = 0x11;
|
|
remote_state[1] = 0xDA;
|
|
remote_state[2] = 0x17;
|
|
remote_state[3] = 0x18;
|
|
remote_state[4] = 0x04;
|
|
// remote_state[6] is a checksum byte, it will be set by checksum().
|
|
remote_state[7] = 0x11;
|
|
remote_state[8] = 0xDA;
|
|
remote_state[9] = 0x17;
|
|
remote_state[10] = 0x18;
|
|
remote_state[12] = 0x73;
|
|
remote_state[14] = 0x20;
|
|
remote_state[18] = 0x16; // Fan speed and swing
|
|
remote_state[20] = 0x20;
|
|
// remote_state[21] is a checksum byte, it will be set by checksum().
|
|
_saved_temp = getTemp();
|
|
}
|
|
|
|
uint8_t *IRDaikin176::getRaw(void) {
|
|
checksum(); // Ensure correct settings before sending.
|
|
return remote_state;
|
|
}
|
|
|
|
void IRDaikin176::setRaw(const uint8_t new_code[]) {
|
|
memcpy(remote_state, new_code, kDaikin176StateLength);
|
|
_saved_temp = getTemp();
|
|
}
|
|
|
|
#if SEND_DAIKIN176
|
|
void IRDaikin176::send(const uint16_t repeat) {
|
|
_irsend.sendDaikin176(getRaw(), kDaikin176StateLength, repeat);
|
|
}
|
|
#endif // SEND_DAIKIN176
|
|
|
|
void IRDaikin176::on(void) { setPower(true); }
|
|
|
|
void IRDaikin176::off(void) { setPower(false); }
|
|
|
|
void IRDaikin176::setPower(const bool on) {
|
|
remote_state[kDaikin176ByteModeButton] = 0;
|
|
setBit(&remote_state[kDaikin176BytePower], kDaikinBitPowerOffset, on);
|
|
}
|
|
|
|
bool IRDaikin176::getPower(void) {
|
|
return GETBIT8(remote_state[kDaikin176BytePower], kDaikinBitPowerOffset);
|
|
}
|
|
|
|
uint8_t IRDaikin176::getMode(void) {
|
|
return GETBITS8(remote_state[kDaikin176ByteMode], kHighNibble, kModeBitsSize);
|
|
}
|
|
|
|
void IRDaikin176::setMode(const uint8_t mode) {
|
|
uint8_t altmode = 0;
|
|
switch (mode) {
|
|
case kDaikinFan: altmode = 0; break;
|
|
case kDaikinDry: altmode = 7; break;
|
|
case kDaikin176Cool: altmode = 2; break;
|
|
default: this->setMode(kDaikin176Cool); return;
|
|
}
|
|
// Set the mode.
|
|
setBits(&remote_state[kDaikin176ByteMode], kHighNibble, kModeBitsSize, mode);
|
|
setBits(&remote_state[kDaikin176BytePower], kHighNibble, kModeBitsSize,
|
|
altmode);
|
|
setTemp(_saved_temp);
|
|
// Needs to happen after setTemp() as it will clear it.
|
|
remote_state[kDaikin176ByteModeButton] = kDaikin176ModeButton;
|
|
}
|
|
|
|
// Convert a standard A/C mode into its native mode.
|
|
uint8_t IRDaikin176::convertMode(const stdAc::opmode_t mode) {
|
|
switch (mode) {
|
|
case stdAc::opmode_t::kDry: return kDaikinDry;
|
|
case stdAc::opmode_t::kHeat: // Heat not supported, but fan is the closest.
|
|
case stdAc::opmode_t::kFan: return kDaikinFan;
|
|
default: return kDaikin176Cool;
|
|
}
|
|
}
|
|
|
|
// Convert a native mode to it's common equivalent.
|
|
stdAc::opmode_t IRDaikin176::toCommonMode(const uint8_t mode) {
|
|
switch (mode) {
|
|
case kDaikinDry: return stdAc::opmode_t::kDry;
|
|
case kDaikinHeat: // There is no heat mode, but fan is the closest.
|
|
case kDaikinFan: return stdAc::opmode_t::kFan;
|
|
default: return stdAc::opmode_t::kCool;
|
|
}
|
|
}
|
|
|
|
// Set the temp in deg C
|
|
void IRDaikin176::setTemp(const uint8_t temp) {
|
|
uint8_t degrees = std::min(kDaikinMaxTemp, std::max(temp, kDaikinMinTemp));
|
|
_saved_temp = degrees;
|
|
switch (getMode()) {
|
|
case kDaikinDry:
|
|
case kDaikinFan:
|
|
degrees = kDaikin176DryFanTemp;
|
|
}
|
|
setBits(&remote_state[kDaikin176ByteTemp], kDaikin176TempOffset,
|
|
kDaikin176TempSize, degrees - 9);
|
|
remote_state[kDaikin176ByteModeButton] = 0;
|
|
}
|
|
|
|
uint8_t IRDaikin176::getTemp(void) {
|
|
return GETBITS8(remote_state[kDaikin176ByteTemp], kDaikin176TempOffset,
|
|
kDaikin176TempSize) + 9;
|
|
}
|
|
|
|
// Set the speed of the fan, 1 for Min or 3 for Max
|
|
void IRDaikin176::setFan(const uint8_t fan) {
|
|
switch (fan) {
|
|
case kDaikinFanMin:
|
|
case kDaikin176FanMax:
|
|
setBits(&remote_state[kDaikin176ByteFan], kHighNibble, kDaikinFanSize,
|
|
fan);
|
|
remote_state[kDaikin176ByteModeButton] = 0;
|
|
break;
|
|
default:
|
|
setFan(kDaikin176FanMax);
|
|
}
|
|
}
|
|
|
|
uint8_t IRDaikin176::getFan(void) {
|
|
return GETBITS8(remote_state[kDaikin176ByteFan], kHighNibble, kDaikinFanSize);
|
|
}
|
|
|
|
// Convert a standard A/C Fan speed into its native fan speed.
|
|
uint8_t IRDaikin176::convertFan(const stdAc::fanspeed_t speed) {
|
|
switch (speed) {
|
|
case stdAc::fanspeed_t::kMin:
|
|
case stdAc::fanspeed_t::kLow: return kDaikinFanMin;
|
|
default: return kDaikin176FanMax;
|
|
}
|
|
}
|
|
|
|
void IRDaikin176::setSwingHorizontal(const uint8_t position) {
|
|
switch (position) {
|
|
case kDaikin176SwingHOff:
|
|
case kDaikin176SwingHAuto:
|
|
setBits(&remote_state[kDaikin176ByteSwingH], kLowNibble, kDaikinSwingSize,
|
|
position);
|
|
break;
|
|
default: setSwingHorizontal(kDaikin176SwingHAuto);
|
|
}
|
|
}
|
|
|
|
uint8_t IRDaikin176::getSwingHorizontal(void) {
|
|
return GETBITS8(remote_state[kDaikin176ByteSwingH], kLowNibble,
|
|
kDaikinSwingSize);
|
|
}
|
|
|
|
// Convert a standard A/C horizontal swing into its native version.
|
|
uint8_t IRDaikin176::convertSwingH(const stdAc::swingh_t position) {
|
|
switch (position) {
|
|
case stdAc::swingh_t::kOff: return kDaikin176SwingHOff;
|
|
case stdAc::swingh_t::kAuto: return kDaikin176SwingHAuto;
|
|
default: return kDaikin176SwingHAuto;
|
|
}
|
|
}
|
|
// Convert a native horizontal swing to it's common equivalent.
|
|
stdAc::swingh_t IRDaikin176::toCommonSwingH(const uint8_t setting) {
|
|
switch (setting) {
|
|
case kDaikin176SwingHOff: return stdAc::swingh_t::kOff;
|
|
case kDaikin176SwingHAuto: return stdAc::swingh_t::kAuto;
|
|
default:
|
|
return stdAc::swingh_t::kAuto;
|
|
}
|
|
}
|
|
|
|
// Convert a native fan speed to it's common equivalent.
|
|
stdAc::fanspeed_t IRDaikin176::toCommonFanSpeed(const uint8_t speed) {
|
|
return (speed == kDaikinFanMin) ? stdAc::fanspeed_t::kMin
|
|
: stdAc::fanspeed_t::kMax;
|
|
}
|
|
|
|
// Convert the A/C state to it's common equivalent.
|
|
stdAc::state_t IRDaikin176::toCommon(void) {
|
|
stdAc::state_t result;
|
|
result.protocol = decode_type_t::DAIKIN176;
|
|
result.model = -1; // No models used.
|
|
result.power = this->getPower();
|
|
result.mode = IRDaikin176::toCommonMode(this->getMode());
|
|
result.celsius = true;
|
|
result.degrees = this->getTemp();
|
|
result.fanspeed = this->toCommonFanSpeed(this->getFan());
|
|
result.swingh = this->toCommonSwingH(this->getSwingHorizontal());
|
|
|
|
// Not supported.
|
|
result.swingv = stdAc::swingv_t::kOff;
|
|
result.quiet = false;
|
|
result.turbo = false;
|
|
result.light = false;
|
|
result.clean = false;
|
|
result.econo = false;
|
|
result.filter = false;
|
|
result.beep = false;
|
|
result.sleep = -1;
|
|
result.clock = -1;
|
|
return result;
|
|
}
|
|
|
|
// Convert the internal state into a human readable string.
|
|
String IRDaikin176::toString(void) {
|
|
String result = "";
|
|
result.reserve(80); // Reserve some heap for the string to reduce fragging.
|
|
result += addBoolToString(getPower(), kPowerStr, false);
|
|
result += addModeToString(getMode(), kDaikinAuto, kDaikin176Cool, kDaikinHeat,
|
|
kDaikinDry, kDaikinFan);
|
|
result += addTempToString(getTemp());
|
|
result += addFanToString(getFan(), kDaikin176FanMax, kDaikinFanMin,
|
|
kDaikinFanMin, kDaikinFanMin, kDaikinFanMin);
|
|
result += addIntToString(getSwingHorizontal(), kSwingHStr);
|
|
result += kSpaceLBraceStr;
|
|
switch (getSwingHorizontal()) {
|
|
case kDaikin176SwingHAuto:
|
|
result += kAutoStr;
|
|
break;
|
|
case kDaikin176SwingHOff:
|
|
result += kOffStr;
|
|
break;
|
|
default:
|
|
result += kUnknownStr;
|
|
}
|
|
result += ')';
|
|
return result;
|
|
}
|
|
|
|
#if DECODE_DAIKIN176
|
|
// Decode the supplied Daikin 176 bit A/C message.
|
|
// Args:
|
|
// results: Ptr to the data to decode and where to store the decode result.
|
|
// nbits: Nr. of bits to expect in the data portion. (kDaikin176Bits)
|
|
// strict: Flag to indicate if we strictly adhere to the specification.
|
|
// Returns:
|
|
// boolean: True if it can decode it, false if it can't.
|
|
//
|
|
// Supported devices:
|
|
// - Daikin BRC4C153 remote.
|
|
//
|
|
// Status: BETA / Probably works.
|
|
//
|
|
|
|
bool IRrecv::decodeDaikin176(decode_results *results, const uint16_t nbits,
|
|
const bool strict) {
|
|
if (results->rawlen < 2 * (nbits + kHeader + kFooter) - 1)
|
|
return false;
|
|
|
|
// Compliance
|
|
if (strict && nbits != kDaikin176Bits) return false;
|
|
|
|
uint16_t offset = kStartOffset;
|
|
const uint8_t ksectionSize[kDaikin176Sections] = {kDaikin176Section1Length,
|
|
kDaikin176Section2Length};
|
|
|
|
// Sections
|
|
uint16_t pos = 0;
|
|
for (uint8_t section = 0; section < kDaikin176Sections; section++) {
|
|
uint16_t used;
|
|
// Section Header + Section Data (7 bytes) + Section Footer
|
|
used = matchGeneric(results->rawbuf + offset, results->state + pos,
|
|
results->rawlen - offset, ksectionSize[section] * 8,
|
|
kDaikin176HdrMark, kDaikin176HdrSpace,
|
|
kDaikin176BitMark, kDaikin176OneSpace,
|
|
kDaikin176BitMark, kDaikin176ZeroSpace,
|
|
kDaikin176BitMark, kDaikin176Gap,
|
|
section >= kDaikin176Sections - 1,
|
|
kDaikinTolerance, kDaikinMarkExcess, false);
|
|
if (used == 0) return false;
|
|
offset += used;
|
|
pos += ksectionSize[section];
|
|
}
|
|
// Compliance
|
|
if (strict) {
|
|
// Validate the checksum.
|
|
if (!IRDaikin176::validChecksum(results->state)) return false;
|
|
}
|
|
|
|
// Success
|
|
results->decode_type = decode_type_t::DAIKIN176;
|
|
results->bits = nbits;
|
|
// No need to record the state as we stored it as we decoded it.
|
|
// As we use result->state, we don't record value, address, or command as it
|
|
// is a union data type.
|
|
return true;
|
|
}
|
|
#endif // DECODE_DAIKIN176
|
|
|
|
#if SEND_DAIKIN128
|
|
// Send a Daikin 128 bit A/C message.
|
|
//
|
|
// Args:
|
|
// data: An array of kDaikin128StateLength bytes containing the IR command.
|
|
//
|
|
// Status: STABLE / Known Working.
|
|
//
|
|
// Supported devices:
|
|
// - Daikin BRC52B63 remote.
|
|
//
|
|
// Ref: https://github.com/crankyoldgit/IRremoteESP8266/issues/827
|
|
void IRsend::sendDaikin128(const unsigned char data[], const uint16_t nbytes,
|
|
const uint16_t repeat) {
|
|
if (nbytes < kDaikin128SectionLength)
|
|
return; // Not enough bytes to send a partial message.
|
|
|
|
for (uint16_t r = 0; r <= repeat; r++) {
|
|
enableIROut(kDaikin128Freq);
|
|
// Leader
|
|
for (uint8_t i = 0; i < 2; i++) {
|
|
mark(kDaikin128LeaderMark);
|
|
space(kDaikin128LeaderSpace);
|
|
}
|
|
// Section #1 (Header + Data)
|
|
sendGeneric(kDaikin128HdrMark, kDaikin128HdrSpace, kDaikin128BitMark,
|
|
kDaikin128OneSpace, kDaikin128BitMark, kDaikin128ZeroSpace,
|
|
kDaikin128BitMark, kDaikin128Gap, data,
|
|
kDaikin128SectionLength,
|
|
kDaikin128Freq, false, 0, kDutyDefault);
|
|
// Section #2 (Data + Footer)
|
|
sendGeneric(0, 0, kDaikin128BitMark,
|
|
kDaikin128OneSpace, kDaikin128BitMark, kDaikin128ZeroSpace,
|
|
kDaikin128FooterMark, kDaikin128Gap,
|
|
data + kDaikin128SectionLength,
|
|
nbytes - kDaikin128SectionLength,
|
|
kDaikin128Freq, false, 0, kDutyDefault);
|
|
}
|
|
}
|
|
#endif // SEND_DAIKIN128
|
|
|
|
// Class for handling Daikin 128 bit / 16 byte A/C messages.
|
|
//
|
|
// Code by crankyoldgit.
|
|
// Analysis by Daniel Vena
|
|
//
|
|
// Status: STABLE / Known Working.
|
|
//
|
|
// Supported Remotes: Daikin BRC52B63 remote
|
|
//
|
|
IRDaikin128::IRDaikin128(const uint16_t pin, const bool inverted,
|
|
const bool use_modulation)
|
|
: _irsend(pin, inverted, use_modulation) { stateReset(); }
|
|
|
|
void IRDaikin128::begin(void) { _irsend.begin(); }
|
|
|
|
uint8_t IRDaikin128::calcFirstChecksum(const uint8_t state[]) {
|
|
return sumNibbles(state, kDaikin128SectionLength - 1,
|
|
state[kDaikin128SectionLength - 1] & 0x0F) & 0x0F;
|
|
}
|
|
|
|
uint8_t IRDaikin128::calcSecondChecksum(const uint8_t state[]) {
|
|
return sumNibbles(state + kDaikin128SectionLength,
|
|
kDaikin128SectionLength - 1);
|
|
}
|
|
|
|
// Verify the checksum is valid for a given state.
|
|
// Args:
|
|
// state: The array to verify the checksum of.
|
|
// Returns:
|
|
// A boolean.
|
|
bool IRDaikin128::validChecksum(uint8_t state[]) {
|
|
// Validate the checksum of section #1.
|
|
if (state[kDaikin128SectionLength - 1] >> 4 != calcFirstChecksum(state))
|
|
return false;
|
|
// Validate the checksum of section #2
|
|
if (state[kDaikin128StateLength - 1] != calcSecondChecksum(state))
|
|
return false;
|
|
return true;
|
|
}
|
|
|
|
// Calculate and set the checksum values for the internal state.
|
|
void IRDaikin128::checksum(void) {
|
|
remote_state[kDaikin128SectionLength - 1] &= 0x0F; // Clear upper half.
|
|
remote_state[kDaikin128SectionLength - 1] |=
|
|
(calcFirstChecksum(remote_state) << 4);
|
|
remote_state[kDaikin128StateLength - 1] = calcSecondChecksum(remote_state);
|
|
}
|
|
|
|
void IRDaikin128::stateReset(void) {
|
|
for (uint8_t i = 0; i < kDaikin128StateLength; i++) remote_state[i] = 0x00;
|
|
remote_state[0] = 0x16;
|
|
remote_state[7] = 0x04; // Most significant nibble is a checksum.
|
|
remote_state[8] = 0xA1;
|
|
// remote_state[15] is a checksum byte, it will be set by checksum().
|
|
}
|
|
|
|
uint8_t *IRDaikin128::getRaw(void) {
|
|
checksum(); // Ensure correct settings before sending.
|
|
return remote_state;
|
|
}
|
|
|
|
void IRDaikin128::setRaw(const uint8_t new_code[]) {
|
|
memcpy(remote_state, new_code, kDaikin128StateLength);
|
|
}
|
|
|
|
#if SEND_DAIKIN128
|
|
void IRDaikin128::send(const uint16_t repeat) {
|
|
_irsend.sendDaikin128(getRaw(), kDaikin128StateLength, repeat);
|
|
}
|
|
#endif // SEND_DAIKIN128
|
|
|
|
void IRDaikin128::setPowerToggle(const bool toggle) {
|
|
setBit(&remote_state[kDaikin128BytePowerSwingSleep],
|
|
kDaikin128BitPowerToggleOffset, toggle);
|
|
}
|
|
|
|
bool IRDaikin128::getPowerToggle(void) {
|
|
return GETBIT8(remote_state[kDaikin128BytePowerSwingSleep],
|
|
kDaikin128BitPowerToggleOffset);
|
|
}
|
|
|
|
uint8_t IRDaikin128::getMode(void) {
|
|
return GETBITS8(remote_state[kDaikin128ByteModeFan], kLowNibble,
|
|
kDaikin128ModeSize);
|
|
}
|
|
|
|
void IRDaikin128::setMode(const uint8_t mode) {
|
|
switch (mode) {
|
|
case kDaikin128Auto:
|
|
case kDaikin128Cool:
|
|
case kDaikin128Heat:
|
|
case kDaikin128Fan:
|
|
case kDaikin128Dry:
|
|
setBits(&remote_state[kDaikin128ByteModeFan], kLowNibble,
|
|
kDaikin128ModeSize, mode);
|
|
break;
|
|
default:
|
|
this->setMode(kDaikin128Auto);
|
|
return;
|
|
}
|
|
// Force a reset of mode dependant things.
|
|
setFan(getFan()); // Covers Quiet & Powerful too.
|
|
setEcono(getEcono());
|
|
}
|
|
|
|
// Convert a standard A/C mode into its native mode.
|
|
uint8_t IRDaikin128::convertMode(const stdAc::opmode_t mode) {
|
|
switch (mode) {
|
|
case stdAc::opmode_t::kCool: return kDaikin128Cool;
|
|
case stdAc::opmode_t::kHeat: return kDaikin128Heat;
|
|
case stdAc::opmode_t::kDry: return kDaikinDry;
|
|
case stdAc::opmode_t::kFan: return kDaikin128Fan;
|
|
default: return kDaikin128Auto;
|
|
}
|
|
}
|
|
|
|
// Convert a native mode to it's common equivalent.
|
|
stdAc::opmode_t IRDaikin128::toCommonMode(const uint8_t mode) {
|
|
switch (mode) {
|
|
case kDaikin128Cool: return stdAc::opmode_t::kCool;
|
|
case kDaikin128Heat: return stdAc::opmode_t::kHeat;
|
|
case kDaikin128Dry: return stdAc::opmode_t::kDry;
|
|
case kDaikin128Fan: return stdAc::opmode_t::kFan;
|
|
default: return stdAc::opmode_t::kAuto;
|
|
}
|
|
}
|
|
|
|
// Set the temp in deg C
|
|
void IRDaikin128::setTemp(const uint8_t temp) {
|
|
remote_state[kDaikin128ByteTemp] = uint8ToBcd(
|
|
std::min(kDaikin128MaxTemp, std::max(temp, kDaikin128MinTemp)));
|
|
}
|
|
|
|
uint8_t IRDaikin128::getTemp(void) {
|
|
return bcdToUint8(remote_state[kDaikin128ByteTemp]);
|
|
}
|
|
|
|
uint8_t IRDaikin128::getFan(void) {
|
|
return GETBITS8(remote_state[kDaikin128ByteModeFan], kHighNibble,
|
|
kDaikinFanSize);
|
|
}
|
|
|
|
void IRDaikin128::setFan(const uint8_t speed) {
|
|
uint8_t new_speed = speed;
|
|
uint8_t mode = getMode();
|
|
switch (speed) {
|
|
case kDaikin128FanQuiet:
|
|
case kDaikin128FanPowerful:
|
|
if (mode == kDaikin128Auto) new_speed = kDaikin128FanAuto;
|
|
// FALL-THRU
|
|
case kDaikin128FanAuto:
|
|
case kDaikin128FanHigh:
|
|
case kDaikin128FanMed:
|
|
case kDaikin128FanLow:
|
|
setBits(&remote_state[kDaikin128ByteModeFan], kHighNibble, kDaikinFanSize,
|
|
new_speed);
|
|
break;
|
|
default:
|
|
this->setFan(kDaikin128FanAuto);
|
|
}
|
|
}
|
|
|
|
// Convert a standard A/C Fan speed into its native fan speed.
|
|
uint8_t IRDaikin128::convertFan(const stdAc::fanspeed_t speed) {
|
|
switch (speed) {
|
|
case stdAc::fanspeed_t::kMin: return kDaikinFanQuiet;
|
|
case stdAc::fanspeed_t::kLow: return kDaikin128FanLow;
|
|
case stdAc::fanspeed_t::kMedium: return kDaikin128FanMed;
|
|
case stdAc::fanspeed_t::kHigh: return kDaikin128FanHigh;
|
|
case stdAc::fanspeed_t::kMax: return kDaikin128FanPowerful;
|
|
default: return kDaikin128FanAuto;
|
|
}
|
|
}
|
|
|
|
// Convert a native fan speed to it's common equivalent.
|
|
stdAc::fanspeed_t IRDaikin128::toCommonFanSpeed(const uint8_t speed) {
|
|
switch (speed) {
|
|
case kDaikin128FanPowerful: return stdAc::fanspeed_t::kMax;
|
|
case kDaikin128FanHigh: return stdAc::fanspeed_t::kHigh;
|
|
case kDaikin128FanMed: return stdAc::fanspeed_t::kMedium;
|
|
case kDaikin128FanLow: return stdAc::fanspeed_t::kLow;
|
|
case kDaikinFanQuiet: return stdAc::fanspeed_t::kMin;
|
|
default: return stdAc::fanspeed_t::kAuto;
|
|
}
|
|
}
|
|
|
|
void IRDaikin128::setSwingVertical(const bool on) {
|
|
setBit(&remote_state[kDaikin128BytePowerSwingSleep], kDaikin128BitSwingOffset,
|
|
on);
|
|
}
|
|
|
|
bool IRDaikin128::getSwingVertical(void) {
|
|
return GETBIT8(remote_state[kDaikin128BytePowerSwingSleep],
|
|
kDaikin128BitSwingOffset);
|
|
}
|
|
|
|
void IRDaikin128::setSleep(const bool on) {
|
|
setBit(&remote_state[kDaikin128BytePowerSwingSleep], kDaikin128BitSleepOffset,
|
|
on);
|
|
}
|
|
|
|
bool IRDaikin128::getSleep(void) {
|
|
return GETBIT8(remote_state[kDaikin128BytePowerSwingSleep],
|
|
kDaikin128BitSleepOffset);
|
|
}
|
|
|
|
void IRDaikin128::setEcono(const bool on) {
|
|
uint8_t mode = getMode();
|
|
setBit(&remote_state[kDaikin128ByteEconoLight], kDaikin128BitEconoOffset,
|
|
on && (mode == kDaikin128Cool || mode == kDaikin128Heat));
|
|
}
|
|
|
|
bool IRDaikin128::getEcono(void) {
|
|
return GETBIT8(remote_state[kDaikin128ByteEconoLight],
|
|
kDaikin128BitEconoOffset);
|
|
}
|
|
|
|
void IRDaikin128::setQuiet(const bool on) {
|
|
uint8_t mode = getMode();
|
|
if (on && (mode == kDaikin128Cool || mode == kDaikin128Heat))
|
|
setFan(kDaikin128FanQuiet);
|
|
else if (getFan() == kDaikin128FanQuiet)
|
|
setFan(kDaikin128FanAuto);
|
|
}
|
|
|
|
bool IRDaikin128::getQuiet(void) {
|
|
return getFan() == kDaikin128FanQuiet;
|
|
}
|
|
|
|
void IRDaikin128::setPowerful(const bool on) {
|
|
uint8_t mode = getMode();
|
|
if (on && (mode == kDaikin128Cool || mode == kDaikin128Heat))
|
|
setFan(kDaikin128FanPowerful);
|
|
else if (getFan() == kDaikin128FanPowerful)
|
|
setFan(kDaikin128FanAuto);
|
|
}
|
|
|
|
bool IRDaikin128::getPowerful(void) {
|
|
return getFan() == kDaikin128FanPowerful;
|
|
}
|
|
|
|
// Set the clock in mins since midnight
|
|
void IRDaikin128::setClock(const uint16_t mins_since_midnight) {
|
|
uint16_t mins = mins_since_midnight;
|
|
if (mins_since_midnight >= 24 * 60) mins = 0; // Bounds check.
|
|
// Hours.
|
|
remote_state[kDaikin128ByteClockHours] = uint8ToBcd(mins / 60);
|
|
// Minutes.
|
|
remote_state[kDaikin128ByteClockMins] = uint8ToBcd(mins % 60);
|
|
}
|
|
|
|
uint16_t IRDaikin128::getClock(void) {
|
|
return bcdToUint8(remote_state[kDaikin128ByteClockHours]) * 60 +
|
|
bcdToUint8(remote_state[kDaikin128ByteClockMins]);
|
|
}
|
|
|
|
void IRDaikin128::setOnTimerEnabled(const bool on) {
|
|
setBit(&remote_state[kDaikin128ByteOnTimer], kDaikin128BitTimerEnabledOffset,
|
|
on);
|
|
}
|
|
|
|
bool IRDaikin128::getOnTimerEnabled(void) {
|
|
return GETBIT8(remote_state[kDaikin128ByteOnTimer],
|
|
kDaikin128BitTimerEnabledOffset);
|
|
}
|
|
|
|
// Timer is rounds down to the nearest half hour.
|
|
// Args:
|
|
// ptr: A PTR to the byte containing the Timer value to be updated.
|
|
// mins_since_midnight: The number of minutes the new timer should be set to.
|
|
void IRDaikin128::setTimer(uint8_t *ptr, const uint16_t mins_since_midnight) {
|
|
uint16_t mins = mins_since_midnight;
|
|
if (mins_since_midnight >= 24 * 60) mins = 0; // Bounds check.
|
|
// Set the half hour bit
|
|
setBit(ptr, kDaikin128HalfHourOffset, (mins % 60) >= 30);
|
|
// Set the nr of whole hours.
|
|
setBits(ptr, kDaikin128HoursOffset, kDaikin128HoursSize,
|
|
uint8ToBcd(mins / 60));
|
|
}
|
|
|
|
// Timer is stored in nr of half hours internally.
|
|
// Args:
|
|
// ptr: A PTR to the byte containing the Timer value.
|
|
// Returns:
|
|
// A uint16_t containing the number of minutes since midnight.
|
|
uint16_t IRDaikin128::getTimer(const uint8_t *ptr) {
|
|
return bcdToUint8(GETBITS8(*ptr, kDaikin128HoursOffset,
|
|
kDaikin128HoursSize)) * 60 +
|
|
(GETBIT8(*ptr, kDaikin128HalfHourOffset) ? 30 : 0);
|
|
}
|
|
|
|
void IRDaikin128::setOnTimer(const uint16_t mins_since_midnight) {
|
|
setTimer(remote_state + kDaikin128ByteOnTimer, mins_since_midnight);
|
|
}
|
|
|
|
uint16_t IRDaikin128::getOnTimer(void) {
|
|
return getTimer(remote_state + kDaikin128ByteOnTimer);
|
|
}
|
|
|
|
void IRDaikin128::setOffTimerEnabled(const bool on) {
|
|
setBit(&remote_state[kDaikin128ByteOffTimer], kDaikin128BitTimerEnabledOffset,
|
|
on);
|
|
}
|
|
|
|
bool IRDaikin128::getOffTimerEnabled(void) {
|
|
return GETBIT8(remote_state[kDaikin128ByteOffTimer],
|
|
kDaikin128BitTimerEnabledOffset);
|
|
}
|
|
|
|
void IRDaikin128::setOffTimer(const uint16_t mins_since_midnight) {
|
|
setTimer(remote_state + kDaikin128ByteOffTimer, mins_since_midnight);
|
|
}
|
|
|
|
uint16_t IRDaikin128::getOffTimer(void) {
|
|
return getTimer(remote_state + kDaikin128ByteOffTimer);
|
|
}
|
|
|
|
void IRDaikin128::setLightToggle(const uint8_t unit) {
|
|
switch (unit) {
|
|
case 0:
|
|
case kDaikin128BitCeiling:
|
|
case kDaikin128BitWall:
|
|
remote_state[kDaikin128ByteEconoLight] &= ~kDaikin128MaskLight;
|
|
remote_state[kDaikin128ByteEconoLight] |= unit;
|
|
break;
|
|
default: setLightToggle(0);
|
|
}
|
|
}
|
|
|
|
uint8_t IRDaikin128::getLightToggle(void) {
|
|
return remote_state[kDaikin128ByteEconoLight] & kDaikin128MaskLight;
|
|
}
|
|
|
|
// Convert the internal state into a human readable string.
|
|
String IRDaikin128::toString(void) {
|
|
String result = "";
|
|
result.reserve(240); // Reserve some heap for the string to reduce fragging.
|
|
result += addBoolToString(getPowerToggle(), kPowerStr + ' ' + kToggleStr,
|
|
false);
|
|
result += addModeToString(getMode(), kDaikin128Auto, kDaikin128Cool,
|
|
kDaikin128Heat, kDaikin128Dry, kDaikin128Fan);
|
|
result += addTempToString(getTemp());
|
|
result += addFanToString(getFan(), kDaikin128FanHigh, kDaikin128FanLow,
|
|
kDaikin128FanAuto, kDaikin128FanQuiet,
|
|
kDaikin128FanMed);
|
|
result += addBoolToString(getPowerful(), kPowerfulStr);
|
|
result += addBoolToString(getQuiet(), kQuietStr);
|
|
result += addBoolToString(getSwingVertical(), kSwingVStr);
|
|
result += addBoolToString(getSleep(), kSleepStr);
|
|
result += addBoolToString(getEcono(), kEconoStr);
|
|
result += addLabeledString(minsToString(getClock()), kClockStr);
|
|
result += addBoolToString(getOnTimerEnabled(), kOnTimerStr);
|
|
result += addLabeledString(minsToString(getOnTimer()), kOnTimerStr);
|
|
result += addBoolToString(getOffTimerEnabled(), kOffTimerStr);
|
|
result += addLabeledString(minsToString(getOffTimer()), kOffTimerStr);
|
|
result += addIntToString(getLightToggle(), kLightStr + ' ' + kToggleStr);
|
|
result += kSpaceLBraceStr;
|
|
switch (getLightToggle()) {
|
|
case kDaikin128BitCeiling: result += kCeilingStr; break;
|
|
case kDaikin128BitWall: result += kWallStr; break;
|
|
case 0: result += kOffStr; break;
|
|
default: result += kUnknownStr;
|
|
}
|
|
result += ')';
|
|
return result;
|
|
}
|
|
|
|
// Convert the A/C state to it's common equivalent.
|
|
stdAc::state_t IRDaikin128::toCommon(const stdAc::state_t *prev) {
|
|
stdAc::state_t result;
|
|
if (prev != NULL) result = *prev;
|
|
result.protocol = decode_type_t::DAIKIN128;
|
|
result.model = -1; // No models used.
|
|
result.power ^= getPowerToggle();
|
|
result.mode = toCommonMode(getMode());
|
|
result.celsius = true;
|
|
result.degrees = getTemp();
|
|
result.fanspeed = toCommonFanSpeed(getFan());
|
|
result.swingv = getSwingVertical() ? stdAc::swingv_t::kAuto
|
|
: stdAc::swingv_t::kOff;
|
|
result.quiet = getQuiet();
|
|
result.turbo = getPowerful();
|
|
result.econo = getEcono();
|
|
result.light ^= (getLightToggle() != 0);
|
|
result.sleep = getSleep() ? 0 : -1;
|
|
result.clock = getClock();
|
|
// Not supported.
|
|
result.swingh = stdAc::swingh_t::kOff;
|
|
result.clean = false;
|
|
result.filter = false;
|
|
result.beep = false;
|
|
return result;
|
|
}
|
|
|
|
#if DECODE_DAIKIN128
|
|
// Decode the supplied Daikin 128 bit A/C message.
|
|
// Args:
|
|
// results: Ptr to the data to decode and where to store the decode result.
|
|
// nbits: Nr. of bits to expect in the data portion. (kDaikin128Bits)
|
|
// strict: Flag to indicate if we strictly adhere to the specification.
|
|
// Returns:
|
|
// boolean: True if it can decode it, false if it can't.
|
|
//
|
|
// Supported devices:
|
|
// - Daikin BRC52B63 remote.
|
|
//
|
|
// Status: STABLE / Known Working.
|
|
//
|
|
// Ref: https://github.com/crankyoldgit/IRremoteESP8266/issues/827
|
|
bool IRrecv::decodeDaikin128(decode_results *results, const uint16_t nbits,
|
|
const bool strict) {
|
|
if (results->rawlen < 2 * (nbits + kHeader) + kFooter - 1)
|
|
return false;
|
|
if (nbits / 8 <= kDaikin128SectionLength) return false;
|
|
|
|
// Compliance
|
|
if (strict && nbits != kDaikin128Bits) return false;
|
|
|
|
uint16_t offset = kStartOffset;
|
|
|
|
// Leader
|
|
for (uint8_t i = 0; i < 2; i++) {
|
|
if (!matchMark(results->rawbuf[offset++], kDaikin128LeaderMark,
|
|
kDaikinTolerance, kDaikinMarkExcess)) return false;
|
|
if (!matchSpace(results->rawbuf[offset++], kDaikin128LeaderSpace,
|
|
kDaikinTolerance, kDaikinMarkExcess)) return false;
|
|
}
|
|
const uint16_t ksectionSize[kDaikin128Sections] = {
|
|
kDaikin128SectionLength, (uint16_t)(nbits / 8 - kDaikin128SectionLength)};
|
|
// Data Sections
|
|
uint16_t pos = 0;
|
|
for (uint8_t section = 0; section < kDaikin128Sections; section++) {
|
|
uint16_t used;
|
|
// Section Header (first section only) + Section Data (8 bytes) +
|
|
// Section Footer (Not for first section)
|
|
used = matchGeneric(results->rawbuf + offset, results->state + pos,
|
|
results->rawlen - offset, ksectionSize[section] * 8,
|
|
section == 0 ? kDaikin128HdrMark : 0,
|
|
section == 0 ? kDaikin128HdrSpace : 0,
|
|
kDaikin128BitMark, kDaikin128OneSpace,
|
|
kDaikin128BitMark, kDaikin128ZeroSpace,
|
|
section > 0 ? kDaikin128FooterMark : kDaikin128BitMark,
|
|
kDaikin128Gap,
|
|
section > 0,
|
|
kDaikinTolerance, kDaikinMarkExcess, false);
|
|
if (used == 0) return false;
|
|
offset += used;
|
|
pos += ksectionSize[section];
|
|
}
|
|
// Compliance
|
|
if (strict) {
|
|
if (!IRDaikin128::validChecksum(results->state)) return false;
|
|
}
|
|
|
|
// Success
|
|
results->decode_type = decode_type_t::DAIKIN128;
|
|
results->bits = nbits;
|
|
// No need to record the state as we stored it as we decoded it.
|
|
// As we use result->state, we don't record value, address, or command as it
|
|
// is a union data type.
|
|
return true;
|
|
}
|
|
#endif // DECODE_DAIKIN128
|
|
|
|
#if SEND_DAIKIN152
|
|
// Send a Daikin 152 bit A/C message.
|
|
//
|
|
// Args:
|
|
// data: An array of kDaikin152StateLength bytes containing the IR command.
|
|
//
|
|
// Supported devices:
|
|
// - Daikin ARC480A5 remote.
|
|
//
|
|
// Status: STABLE / Known working.
|
|
//
|
|
// Ref: https://github.com/crankyoldgit/IRremoteESP8266/issues/873
|
|
void IRsend::sendDaikin152(const unsigned char data[], const uint16_t nbytes,
|
|
const uint16_t repeat) {
|
|
for (uint16_t r = 0; r <= repeat; r++) {
|
|
// Leader
|
|
sendGeneric(0, 0, kDaikin152BitMark, kDaikin152OneSpace,
|
|
kDaikin152BitMark, kDaikin152ZeroSpace,
|
|
kDaikin152BitMark, kDaikin152Gap,
|
|
(uint64_t)0, kDaikin152LeaderBits,
|
|
kDaikin152Freq, false, 0, kDutyDefault);
|
|
// Header + Data + Footer
|
|
sendGeneric(kDaikin152HdrMark, kDaikin152HdrSpace, kDaikin152BitMark,
|
|
kDaikin152OneSpace, kDaikin152BitMark, kDaikin152ZeroSpace,
|
|
kDaikin152BitMark, kDaikin152Gap, data,
|
|
nbytes, kDaikin152Freq, false, 0, kDutyDefault);
|
|
}
|
|
}
|
|
#endif // SEND_DAIKIN152
|
|
|
|
#if DECODE_DAIKIN152
|
|
// Decode the supplied Daikin 152 bit A/C message.
|
|
// Args:
|
|
// results: Ptr to the data to decode and where to store the decode result.
|
|
// nbits: Nr. of bits to expect in the data portion. (kDaikin152Bits)
|
|
// strict: Flag to indicate if we strictly adhere to the specification.
|
|
// Returns:
|
|
// boolean: True if it can decode it, false if it can't.
|
|
//
|
|
// Supported devices:
|
|
// - Daikin ARC480A5 remote.
|
|
//
|
|
// Status: STABLE / Known working.
|
|
//
|
|
// Ref: https://github.com/crankyoldgit/IRremoteESP8266/issues/873
|
|
bool IRrecv::decodeDaikin152(decode_results *results, const uint16_t nbits,
|
|
const bool strict) {
|
|
if (results->rawlen < 2 * (5 + nbits + kFooter) + kHeader - 1)
|
|
return false;
|
|
if (nbits / 8 < kDaikin152StateLength) return false;
|
|
|
|
// Compliance
|
|
if (strict && nbits != kDaikin152Bits) return false;
|
|
|
|
uint16_t offset = kStartOffset;
|
|
uint16_t used;
|
|
|
|
// Leader
|
|
uint64_t leader = 0;
|
|
used = matchGeneric(results->rawbuf + offset, &leader,
|
|
results->rawlen - offset, kDaikin152LeaderBits,
|
|
0, 0, // No Header
|
|
kDaikin152BitMark, kDaikin152OneSpace,
|
|
kDaikin152BitMark, kDaikin152ZeroSpace,
|
|
kDaikin152BitMark, kDaikin152Gap, // Footer gap
|
|
false, _tolerance, kMarkExcess, false);
|
|
if (used == 0 || leader != 0) return false;
|
|
offset += used;
|
|
|
|
// Header + Data + Footer
|
|
used = matchGeneric(results->rawbuf + offset, results->state,
|
|
results->rawlen - offset, nbits,
|
|
kDaikin152HdrMark, kDaikin152HdrSpace,
|
|
kDaikin152BitMark, kDaikin152OneSpace,
|
|
kDaikin152BitMark, kDaikin152ZeroSpace,
|
|
kDaikin152BitMark, kDaikin152Gap,
|
|
true, _tolerance, kMarkExcess, false);
|
|
if (used == 0) return false;
|
|
|
|
// Compliance
|
|
if (strict) {
|
|
if (!IRDaikin152::validChecksum(results->state)) return false;
|
|
}
|
|
|
|
// Success
|
|
results->decode_type = decode_type_t::DAIKIN152;
|
|
results->bits = nbits;
|
|
// No need to record the state as we stored it as we decoded it.
|
|
// As we use result->state, we don't record value, address, or command as it
|
|
// is a union data type.
|
|
return true;
|
|
}
|
|
#endif // DECODE_DAIKIN152
|
|
|
|
// Class for handling Daikin 152 bit / 19 byte A/C messages.
|
|
//
|
|
// Code by crankyoldgit.
|
|
//
|
|
// Supported Remotes: Daikin ARC480A5 remote
|
|
//
|
|
// Ref:
|
|
// https://github.com/crankyoldgit/IRremoteESP8266/issues/873
|
|
// https://github.com/ToniA/arduino-heatpumpir/blob/master/DaikinHeatpumpARC480A14IR.cpp
|
|
// https://github.com/ToniA/arduino-heatpumpir/blob/master/DaikinHeatpumpARC480A14IR.h
|
|
IRDaikin152::IRDaikin152(const uint16_t pin, const bool inverted,
|
|
const bool use_modulation)
|
|
: _irsend(pin, inverted, use_modulation) { stateReset(); }
|
|
|
|
void IRDaikin152::begin(void) { _irsend.begin(); }
|
|
|
|
#if SEND_DAIKIN152
|
|
void IRDaikin152::send(const uint16_t repeat) {
|
|
_irsend.sendDaikin152(getRaw(), kDaikin152StateLength, repeat);
|
|
}
|
|
#endif // SEND_DAIKIN152
|
|
|
|
// Verify the checksum is valid for a given state.
|
|
// Args:
|
|
// state: The array to verify the checksum of.
|
|
// length: The size of the state.
|
|
// Returns:
|
|
// A boolean.
|
|
bool IRDaikin152::validChecksum(uint8_t state[], const uint16_t length) {
|
|
// Validate the checksum of the given state.
|
|
if (length <= 1 || state[length - 1] != sumBytes(state, length - 1))
|
|
return false;
|
|
else
|
|
return true;
|
|
}
|
|
|
|
// Calculate and set the checksum values for the internal state.
|
|
void IRDaikin152::checksum(void) {
|
|
remote_state[kDaikin152StateLength - 1] = sumBytes(
|
|
remote_state, kDaikin152StateLength - 1);
|
|
}
|
|
|
|
void IRDaikin152::stateReset(void) {
|
|
for (uint8_t i = 3; i < kDaikin152StateLength; i++) remote_state[i] = 0x00;
|
|
remote_state[0] = 0x11;
|
|
remote_state[1] = 0xDA;
|
|
remote_state[2] = 0x27;
|
|
remote_state[15] = 0xC5;
|
|
// remote_state[19] is a checksum byte, it will be set by checksum().
|
|
}
|
|
|
|
uint8_t *IRDaikin152::getRaw(void) {
|
|
checksum(); // Ensure correct settings before sending.
|
|
return remote_state;
|
|
}
|
|
|
|
void IRDaikin152::setRaw(const uint8_t new_code[]) {
|
|
memcpy(remote_state, new_code, kDaikin152StateLength);
|
|
}
|
|
|
|
void IRDaikin152::on(void) { setPower(true); }
|
|
|
|
void IRDaikin152::off(void) { setPower(false); }
|
|
|
|
void IRDaikin152::setPower(const bool on) {
|
|
setBit(&remote_state[kDaikin152PowerByte], kDaikinBitPowerOffset, on);
|
|
}
|
|
|
|
bool IRDaikin152::getPower(void) {
|
|
return GETBIT8(remote_state[kDaikin152PowerByte], kDaikinBitPowerOffset);
|
|
}
|
|
|
|
uint8_t IRDaikin152::getMode(void) {
|
|
return GETBITS8(remote_state[kDaikin152ModeByte], kDaikinModeOffset,
|
|
kDaikinModeSize);
|
|
}
|
|
|
|
void IRDaikin152::setMode(const uint8_t mode) {
|
|
switch (mode) {
|
|
case kDaikinFan:
|
|
setTemp(kDaikin152FanTemp); // Handle special temp for fan mode.
|
|
break;
|
|
case kDaikinDry:
|
|
setTemp(kDaikin152DryTemp); // Handle special temp for dry mode.
|
|
break;
|
|
case kDaikinAuto:
|
|
case kDaikinCool:
|
|
case kDaikinHeat:
|
|
break;
|
|
default:
|
|
this->setMode(kDaikinAuto);
|
|
return;
|
|
}
|
|
setBits(&remote_state[kDaikin152ModeByte], kDaikinModeOffset,
|
|
kDaikinModeSize, mode);
|
|
}
|
|
|
|
// Convert a standard A/C mode into its native mode.
|
|
uint8_t IRDaikin152::convertMode(const stdAc::opmode_t mode) {
|
|
return IRDaikinESP::convertMode(mode);
|
|
}
|
|
|
|
// Set the temp in deg C
|
|
void IRDaikin152::setTemp(const uint8_t temp) {
|
|
uint8_t degrees = std::max(
|
|
temp, (getMode() == kDaikinHeat) ? kDaikinMinTemp : kDaikin2MinCoolTemp);
|
|
degrees = std::min(degrees, kDaikinMaxTemp);
|
|
if (temp == kDaikin152FanTemp) degrees = temp; // Handle fan only temp.
|
|
setBits(&remote_state[kDaikin152TempByte], kDaikinTempOffset,
|
|
kDaikin152TempSize, degrees);
|
|
}
|
|
|
|
uint8_t IRDaikin152::getTemp(void) {
|
|
return GETBITS8(remote_state[kDaikin152TempByte], kDaikinTempOffset,
|
|
kDaikin152TempSize);
|
|
}
|
|
|
|
// Set the speed of the fan, 1-5 or kDaikinFanAuto or kDaikinFanQuiet
|
|
void IRDaikin152::setFan(const uint8_t fan) {
|
|
// Set the fan speed bits, leave low 4 bits alone
|
|
uint8_t fanset;
|
|
if (fan == kDaikinFanQuiet || fan == kDaikinFanAuto)
|
|
fanset = fan;
|
|
else if (fan < kDaikinFanMin || fan > kDaikinFanMax)
|
|
fanset = kDaikinFanAuto;
|
|
else
|
|
fanset = 2 + fan;
|
|
setBits(&remote_state[kDaikin152FanByte], kHighNibble, kNibbleSize, fanset);
|
|
}
|
|
|
|
uint8_t IRDaikin152::getFan(void) {
|
|
const uint8_t fan = GETBITS8(remote_state[kDaikin152FanByte], kHighNibble,
|
|
kNibbleSize);
|
|
switch (fan) {
|
|
case kDaikinFanAuto:
|
|
case kDaikinFanQuiet: return fan;
|
|
default: return fan - 2;
|
|
}
|
|
}
|
|
|
|
// Convert a standard A/C Fan speed into its native fan speed.
|
|
uint8_t IRDaikin152::convertFan(const stdAc::fanspeed_t speed) {
|
|
return IRDaikinESP::convertFan(speed);
|
|
}
|
|
|
|
void IRDaikin152::setSwingV(const bool on) {
|
|
setBits(&remote_state[kDaikin152SwingVByte], kDaikinSwingOffset,
|
|
kDaikinSwingSize, on ? kDaikinSwingOn : kDaikinSwingOff);
|
|
}
|
|
|
|
bool IRDaikin152::getSwingV(void) {
|
|
return GETBITS8(remote_state[kDaikin152SwingVByte], kDaikinSwingOffset,
|
|
kDaikinSwingSize);
|
|
}
|
|
|
|
void IRDaikin152::setQuiet(const bool on) {
|
|
setBit(&remote_state[kDaikin152QuietByte], kDaikinBitSilentOffset, on);
|
|
// Powerful & Quiet mode being on are mutually exclusive.
|
|
if (on) this->setPowerful(false);
|
|
}
|
|
|
|
bool IRDaikin152::getQuiet(void) {
|
|
return GETBIT8(remote_state[kDaikin152QuietByte], kDaikinBitSilentOffset);
|
|
}
|
|
|
|
void IRDaikin152::setPowerful(const bool on) {
|
|
setBit(&remote_state[kDaikin152PowerfulByte], kDaikinBitPowerfulOffset, on);
|
|
if (on) {
|
|
// Powerful, Quiet, Comfortm & Econo mode being on are mutually exclusive.
|
|
this->setQuiet(false);
|
|
this->setComfort(false);
|
|
this->setEcono(false);
|
|
}
|
|
}
|
|
|
|
bool IRDaikin152::getPowerful(void) {
|
|
return GETBIT8(remote_state[kDaikin152PowerfulByte],
|
|
kDaikinBitPowerfulOffset);
|
|
}
|
|
|
|
void IRDaikin152::setEcono(const bool on) {
|
|
setBit(&remote_state[kDaikin152EconoByte], kDaikinBitEconoOffset, on);
|
|
// Powerful & Econo mode being on are mutually exclusive.
|
|
if (on) this->setPowerful(false);
|
|
}
|
|
|
|
bool IRDaikin152::getEcono(void) {
|
|
return GETBIT8(remote_state[kDaikin152EconoByte], kDaikinBitEconoOffset);
|
|
}
|
|
|
|
void IRDaikin152::setSensor(const bool on) {
|
|
setBit(&remote_state[kDaikin152SensorByte], kDaikin152SensorOffset, on);
|
|
}
|
|
|
|
bool IRDaikin152::getSensor(void) {
|
|
return GETBIT8(remote_state[kDaikin152SensorByte], kDaikin152SensorOffset);
|
|
}
|
|
|
|
void IRDaikin152::setComfort(const bool on) {
|
|
setBit(&remote_state[kDaikin152ComfortByte], kDaikin152ComfortOffset, on);
|
|
if (on) {
|
|
// Comfort mode is incompatible with Powerful mode.
|
|
setPowerful(false);
|
|
// It also sets the fan to auto and turns off swingv.
|
|
setFan(kDaikinFanAuto);
|
|
setSwingV(false);
|
|
}
|
|
}
|
|
|
|
bool IRDaikin152::getComfort(void) {
|
|
return GETBIT8(remote_state[kDaikin152ComfortByte], kDaikin152ComfortOffset);
|
|
}
|
|
|
|
// Convert the A/C state to it's common equivalent.
|
|
stdAc::state_t IRDaikin152::toCommon(void) {
|
|
stdAc::state_t result;
|
|
result.protocol = decode_type_t::DAIKIN152;
|
|
result.model = -1; // No models used.
|
|
result.power = this->getPower();
|
|
result.mode = IRDaikinESP::toCommonMode(this->getMode());
|
|
result.celsius = true;
|
|
result.degrees = this->getTemp();
|
|
result.fanspeed = IRDaikinESP::toCommonFanSpeed(this->getFan());
|
|
result.swingv = this->getSwingV() ? stdAc::swingv_t::kAuto
|
|
: stdAc::swingv_t::kOff;
|
|
result.quiet = this->getQuiet();
|
|
result.turbo = this->getPowerful();
|
|
result.econo = this->getEcono();
|
|
// Not supported.
|
|
result.swingh = stdAc::swingh_t::kOff;
|
|
result.clean = false;
|
|
result.filter = false;
|
|
result.light = false;
|
|
result.beep = false;
|
|
result.sleep = -1;
|
|
result.clock = -1;
|
|
return result;
|
|
}
|
|
|
|
// Convert the internal state into a human readable string.
|
|
String IRDaikin152::toString(void) {
|
|
String result = "";
|
|
result.reserve(180); // Reserve some heap for the string to reduce fragging.
|
|
result += addBoolToString(getPower(), kPowerStr, false);
|
|
result += addModeToString(getMode(), kDaikinAuto, kDaikinCool, kDaikinHeat,
|
|
kDaikinDry, kDaikinFan);
|
|
result += addTempToString(getTemp());
|
|
result += addFanToString(getFan(), kDaikinFanMax, kDaikinFanMin,
|
|
kDaikinFanAuto, kDaikinFanQuiet, kDaikinFanMed);
|
|
result += addBoolToString(getSwingV(), kSwingVStr);
|
|
result += addBoolToString(getPowerful(), kPowerfulStr);
|
|
result += addBoolToString(getQuiet(), kQuietStr);
|
|
result += addBoolToString(getEcono(), kEconoStr);
|
|
result += addBoolToString(getSensor(), kSensorStr);
|
|
result += addBoolToString(getComfort(), kComfortStr);
|
|
return result;
|
|
}
|