a8f2293a66
4.1.1 20170329 * Fix default Telemetry for command Prefix3 * Fix webserver Module parameters for disabled select * Fix sensor status for enabled switches * Remove Light as alternative for Power (save code space) * Remove migration option from pre V3 (code cleanup) * Remove unofficial SPIFFS support (code cleanup) * Remove command list when unknown command is entered (save code space) * Rename Status11 json from StatusPWR to unique StatusSTS * Rename command Gateway to IPAddres2, Subnetmask to IPAddress3 and DnsServer to IPAddress4 (save code space) * Add Command MqttResponse to select either command or RESULT topic as response (#258) * Add command StateText1 to StateText3 to assign MQTT_STATUS_OFF, MQTT_STATUS_ON and MQTT_CMND_TOGGLE respectively (#286) * Remove restart after IPAddress changes (#292) * Add support for MAX31850 in xsns_ds18x20.ino (#295) * Fix possible uptime update misses (#302)
34 lines
2.6 KiB
Markdown
34 lines
2.6 KiB
Markdown
## Sonoff-Tasmota
|
|
Provide ESP8266 based Sonoff by [iTead Studio](https://www.itead.cc/) and ElectroDragon IoT Relay with Serial, Web and MQTT control allowing 'Over the Air' or OTA firmware updates using Arduino IDE.
|
|
|
|
Current version is **4.1.1** - See [sonoff/_releasenotes.ino](https://github.com/arendst/Sonoff-Tasmota/blob/master/sonoff/_releasenotes.ino) for change information.
|
|
|
|
- This version provides all (Sonoff) modules in one file and starts up with Sonoff Basic.
|
|
- Once uploaded select module using the configuration webpage or the commands ```Modules``` and ```Module```.
|
|
- After reboot select config menu again or use commands ```GPIOs``` and ```GPIO``` to change GPIO with desired sensor.
|
|
|
|
<img src="https://github.com/arendst/arendst.github.io/blob/master/media/sonoffbasic.jpg" width="250" align="right" />
|
|
|
|
See [Wiki](https://github.com/arendst/Sonoff-Tasmota/wiki) for more information.<br />
|
|
See [Community](https://groups.google.com/d/forum/sonoffusers) for forum and more user experience.
|
|
|
|
The following devices are supported:
|
|
- [iTead Sonoff Basic](http://sonoff.itead.cc/en/products/sonoff/sonoff-basic)
|
|
- [iTead Sonoff RF](http://sonoff.itead.cc/en/products/sonoff/sonoff-rf)
|
|
- [iTead Sonoff SV](https://www.itead.cc/sonoff-sv.html)<img src="https://github.com/arendst/arendst.github.io/blob/master/media/sonoff_th.jpg" width="250" align="right" />
|
|
- [iTead Sonoff TH10/TH16 with temperature sensor](http://sonoff.itead.cc/en/products/sonoff/sonoff-th)
|
|
- [iTead Sonoff Dual](http://sonoff.itead.cc/en/products/sonoff/sonoff-dual)
|
|
- [iTead Sonoff Pow](http://sonoff.itead.cc/en/products/sonoff/sonoff-pow)
|
|
- [iTead Sonoff 4CH](http://sonoff.itead.cc/en/products/sonoff/sonoff-4ch)
|
|
- [iTead S20 Smart Socket](http://sonoff.itead.cc/en/products/residential/s20-socket)
|
|
- [iTead Slampher](http://sonoff.itead.cc/en/products/residential/slampher-rf)
|
|
- [iTead Sonoff Touch](http://sonoff.itead.cc/en/products/residential/sonoff-touch)
|
|
- [iTead Sonoff Led](http://sonoff.itead.cc/en/products/appliances/sonoff-led)
|
|
- [iTead Sonoff Dev](https://www.itead.cc/sonoff-dev.html)
|
|
- [iTead 1 Channel Switch 5V / 12V](https://www.itead.cc/smart-home/inching-self-locking-wifi-wireless-switch.html)
|
|
- [iTead Motor Clockwise/Anticlockwise](https://www.itead.cc/smart-home/motor-reversing-wifi-wireless-switch.html)
|
|
- [Electrodragon IoT Relay Board](http://www.electrodragon.com/product/wifi-iot-relay-board-based-esp8266/)
|
|
|
|
<img src="https://github.com/arendst/arendst.github.io/blob/master/media/sonofftoucheu.jpg" height="280" align="left" />
|
|
<img src="https://github.com/arendst/arendst.github.io/blob/master/media/sonoff4ch.jpg" height="250" align="right" />
|