mgeppert/Tasmota
1
0
Fork 0
Code Issues Pull Requests 1 Actions Packages Projects Releases Wiki Activity
7a3e8a5108
Tasmota/RELEASENOTES.md
Theo Arends 7a3e8a5108 Prep for release 6.5 
Prep for release 6.5
2019-03-13 18:45:54 +01:00

18 KiB
Raw Blame History

Migration Information

See wiki migration path for instructions how to migrate to a major version. Pay attention to the following version breaks due to dynamic settings updates:

  1. Migrate to Sonoff-Tasmota 3.9.x
  2. Migrate to Sonoff-Tasmota 4.x
  3. Migrate to Sonoff-Tasmota 5.14
  4. Migrate to Sonoff-Tasmota 6.x

Release notes

Change in default initial configuration tool

Firmware binary sonoff-classic.bin supports WifiManager, Wps and SmartConfig for initial configuration. The default tool is Wps.

To save memory space all other binaries support WifiManager only.

See _changelog.ino how to enable them again.

  • Define WIFI_CONFIG_TOOL now contains the default behaviour once a SSID has been configured.
  • If no SSID is configured making a wifi connection impossible the new define WIFI_CONFIG_NO_SSID will be used.
  • While define WIFI_CONFIG_NO_SSID is set to WIFI_WPSCONFIG in my_user_config.h the compiler will check for define USE_WPS and if not enabled WIFI_CONFIG_NO_SSID will default to WIFI_MANAGER using the webserver. If define USE_WEBSERVER is also not enabled WIFI_CONFIG_NO_SSID will default to WIFI_SMARTCONFIG. If define USE_SMARTCONFIG is also not enabled WIFI_CONFIG_NO_SSID will default to a new option WIFI_SERIAL allowing to enter wifi parameters to serial which is always possible.

Supported Modules

The following hardware modules are supported.

Module Description
01 Sonoff Basic Sonoff Basic Wifi Smart Switch
02 Sonoff RF Sonoff RF Wifi Smart Switch with RF (434MHz) receiver
03 Sonoff SV Sonoff SV Safe Voltage Wifi Smart Switch
04 Sonoff TH Sonoff TH10/TH16 Wifi Smart Switch with Sensor connection
05 Sonoff Dual Sonoff Dual Wifi Smart Switch
06 Sonoff Pow Sonoff Pow Wifi Smart Switch with Energy Monitoring
07 Sonoff 4CH Sonoff 4CH 4-gang Wifi Smart Switch
08 Sonoff S2X Sonoff S20/S26 Wifi Smart Socket
09 Slampher Sonoff Slampher Wifi Smart Light Bulb Socket with RF (434MHz) receiver
10 Sonoff Touch Sonoff Touch Wifi Light Switch
11 Sonoff LED Sonoff Led Wifi Led Pack (Retired)
12 1 Channel 1 Channel Inching/Self Locking Wifi Switch 5V/12V
13 4 Channel 4 Channel Inching/Self Locking Wifi Switch (Retired)
14 Motor C/AC Motor Clockwise/Antoclockwise Wifi Switch (Retired)
15 ElectroDragon Electrodragon Wifi IoT Board
16 EXS Relay(s) Electronic Experience Store 1 or 2-gang Wifi Module
17 WiOn WiOn Wifi Smart Socket
18 Generic Any ESP8266/ESP8285 device like WeMos and NodeMCU
19 Sonoff Dev Sonoff Dev Wifi Development Board
20 H801 H801 Wifi RGBWW Led Controller
21 Sonoff SC Sonoff SC Wifi Environmental Monitor
22 Sonoff BN-SZ Sonoff BN-SZ01 Wifi Ceiling Led (Retired)
23 Sonoff 4CH Pro Sonoff 4CH Pro 4-gang Wifi Smart Switch
24 Huafan SS HuaFan Wifi Smart Socket
25 Sonoff Bridge Sonoff RF (434MHz) transceive to Wifi Bridge
26 Sonoff B1 Sonoff B1 Wifi RGBWW Led Bulb
27 AiLight Ai-Thinker RGBW Led Bulb
28 Sonoff T1 1CH Sonoff T1 1-gang Wifi Light Switch
29 Sonoff T1 2CH Sonoff T1 2-gang Wifi Light Switch
30 Sonoff T1 3CH Sonoff T1 3-gang Wifi Light Switch
31 Supla Espablo 2-gang Wifi Module
32 Witty Cloud Witty Cloud ESP8266 Wifi Development Board
33 Yunshan Relay ESP8266 Wifi Network Relay Module
34 MagicHome MagicHome, Flux-light and some Arilux LC10 RGB(W) Led Controller
35 Luani HVIO Luani ESP8266 Wifi I/O Module
36 KMC 70011 KMC Wifi Smart Socket with Energy Monitoring
37 Arilux LC01 Arilux AL-LC01 RGB Led Controller
38 Arilux LC11 Arilux AL-LC11 RGBWW Led Controller
39 Sonoff Dual R2 Sonoff Dual R2 Wifi Smart Switch
40 Arilux LC06 Arilux AL-LC06 RGB(WW) Led Controller
41 Sonoff S31 Sonoff S31 Wifi Smart Socket with Energy Monitoring
42 Zengge WF017 Zengge WF017 Wifi RGB(W) Led Controller
43 Sonoff Pow R2 Sonoff Pow R2 Wifi Smart Switch with Energy Monitoring
44 Sonoff iFan02 Sonoff iFan02 Wifi Smart Ceiling Fan with Light
45 BlitzWolf SHP BlitzWolf BW-SHP2, BW-SHP6, HomeCube SP1, Gosund SP111, Teckin SP22 Wifi Smart Switch with Energy Monitoring
46 Shelly 1 Shelly 1 Open Source Wifi Relay Module
47 Shelly 2 Shelly 2 Wifi 2-gang Relay Module with Energy Monitoring
48 Xiaomi Philips Xiaomi Philips Wifi WW Led Bulb
49 Neo Coolcam Neo Coolcam Wifi Smart Socket
50 ESP Switch ESP Switch 4-gang Wifi Switch with Leds
51 OBI Socket OBI Wifi Smart Socket
52 Teckin Teckin SP20 Wifi Smart Switch with Energy Monitoring
53 AplicWDP303075 Aplic WDP 303075 CSL Wifi Smart Switch with Energy Monitoring
54 Tuya Dimmer MIUO (and other Tuya based) Wifi Dimmer for Incandescent Lights and Led
55 Gosund SP1 v23 Gosund SP1 v2.3 Wifi Smart Switch with Energy Monitoring
56 ARMTR Dimmer ARMtronix Wifi dimmer for Incandescent Lights and Led
57 SK03 Outdoor SK03 Outdoor Wifi Smart Switch with Energy Monitoring
58 PS-16-DZ PS-16-DZ Wifi dimmer for Incandescent Lights and Led
59 Teckin US Teckin US and ZooZee SA102 Wifi Smart Switch with Energy Monitoring
60 Manzoku strip Manzoku Wifi Smart Power Strip with four Relays
61 OBI Socket 2 OBI 2 Wifi Smart Socket
62 YTF IR Bridge YTF Infra Red Wifi Bridge
63 Digoo DG-SP202 Digoo DG-SP202 Dual Wifi Smart Switch with Energy Monitoring
64 KA10 Smanergy KA10 Wifi Smart Wall Switch with Energy Monitoring
65 Luminea ZX2820 Luminea ZX2820 Wifi Smart Switch with Energy Monitoring
66 Mi Desk Lamp Mi Desk Lamp with rotary switch and Wifi
67 SP10 Tuya SP10 Wifi Smart Switch with Energy Monitoring
68 WAGA CHCZ02MB WAGA life CHCZ02MB Wifi Smart Switch with Energy Monitoring
69 SYF05 Sunyesmart SYF05 RGBWW Wifi Led Bulb

Provided Binary Downloads

The following binary downloads have been compiled with ESP8266/Arduino library core version 2.4.2 patched with the Alexa fix.

  • sonoff-minimal.bin = The Minimal version allows intermediate OTA uploads to support larger versions and does NOT change any persistent parameter. This version should NOT be used for initial installation.
  • sonoff-classic.bin = The Classic version allows initial installation using either WifiManager, Wps or SmartConfig.
  • sonoff.bin = The Sonoff version without Wps and SmartConfig configuration but adds more sensors.
  • sonoff-BG.bin to sonoff-TW.bin = The Sonoff version without Wps and SmartConfig configuration in different languages.
  • sonoff-sensors.bin = The Sensors version without Wps and SmartConfig configuration but adds even more useful sensors.
  • sonoff-display.bin = The Display version without Wps and SmartConfig configuration but adds display support.
  • sonoff-knx.bin = The Knx version without Wps and SmartConfig configuration and some other features but adds KNX support.

Available Features and Sensors

Feature or Sensor minimal basic classic sonoff knx sensors Remarks
MY_LANGUAGE en-GB x x x x x x
MQTT_LIBRARY_TYPE PUBSUBCLIENT x x x x x x
USE_WPS - - x - - - WPS
USE_SMARTCONFIG - - x - - - SmartConfig
USE_ARDUINO_OTA - - - - - -
USE_DOMOTICZ - - x x x x
USE_HOME_ASSISTANT - - - x x x
USE_MQTT_TLS - - - - - -
USE_KNX - - - - x -
USE_WEBSERVER x x x x x x WifiManager
USE_EMULATION - x x x - x
USE_DISCOVERY - - x x x x
WEBSERVER_ADVERTISE - - x x x x
MQTT_HOST_DISCOVERY - - x x x x
USE_TIMERS - x - x x x
USE_TIMERS_WEB - x - x x x
USE_SUNRISE - x - x x x
USE_RULES - x - x x x
USE_ADC_VCC x x x x x -
USE_DS18B20 - - - - - - Single sensor
USE_DS18x20 - - x x x x Multiple sensors
USE_DS18x20_LEGACY - - - - - - Multiple sensors
Feature or Sensor minimal basic classic sonoff knx sensors
USE_I2C - - - x x x
USE_SHT - - - x x x
USE_HTU - - - x x x
USE_BMP - - - x x x
USE_BME680 - - - - - x
USE_BH1750 - - - x x x
USE_VEML6070 - - - - - x
USE_ADS1115 - - - - - x
USE_ADS1115_I2CDEV - - - - - -
USE_INA219 - - - - - x
USE_SHT3X - - - x x x
USE_TSL2561 - - - - - x
USE_MGS - - - - - x
USE_SGP30 - - - x x x
USE_SI1145 - - - - - x
USE_LM75AD - - - x x x
USE_APDS9960 - - - - - -
USE_MCP230xx - - - - - -
USE_PCA9685 - - - - - -
USE_MPR121 - - - - - -
USE_CCS811 - - - - - -
USE_MPU6050 - - - - - -
USE_DS3231 - - - - - -
USE_MGC3130 - - - - - -
USE_MAX44009 - - - - - -
USE_SCD30 - - - - - -
Feature or Sensor minimal basic classic sonoff knx sensors
USE_SPI - - - - - -
USE_MHZ19 - - - x x x
USE_SENSEAIR - - - x x x
USE_PMS5003 - - - x x x
USE_NOVA_SDS - - - x x x
USE_PZEM004T - - - x x x
USE_PZEM_AC - - - x x x
USE_PZEM_DC - - - x x x
USE_MCP39F501 - x - x x x
USE_SERIAL_BRIDGE - - - x x x
USE_SDM120 - - - - - x
USE_SDM630 - - - - - x
USE_MP3_PLAYER - - - - - x
USE_TUYA_DIMMER - x - x x x
USE_ARMTRONIX_DIMMERS - x - x x x
USE_PS_16_DZ - x - x x x
USE_AZ7798 - - - - - -
USE_PN532_HSU - - - - - -
USE_IR_REMOTE - - - x x x
USE_IR_HVAC - - - - - x
USE_IR_RECEIVE - - - x x x
USE_WS2812 - - x x x x
USE_WS2812_DMA - - - - - -
USE_ARILUX_RF - - - x x x
USE_SR04 - - - x x x
USE_TM1638 - - - - - x
USE_HX711 - - - x x x
USE_RF_FLASH - - - x x x
USE_TX20_WIND_SENSOR - - - x x x
USE_RC_SWITCH - - - x x x
USE_RF_SENSOR - - - - - x AlectoV2 only
USE_SM16716 - x x x x x
USE_DISPLAY - - - - - -

Changelog

Version 6.5.0 20190315

  • Remove command SetOption14 as it has been superseded by command Interlock
  • Remove command SetOption63 as it has been superseded by command Interlock
  • Remove command SetOption35 0-255 for mDNS start-up delay (#4793)
  • Change webserver content handling from single String to small Chunks increasing RAM
  • Change logging message handling
  • Change code use of boolean to bool and byte to uint8_t
  • Change code uint8_t flags to bool flags
  • Change sonoff_template.h layout regarding optional module flags like ADC0
  • Change button driver making it modular
  • Change sonoff_template.h module lay-out by removing non-configurable GPIOs
  • Change switch driver making it modular and introduce input filter (#4665, #4724)
  • Change switch input detection by optimizing switch debounce (#4724)
  • Change web authentication (#4865)
  • Change image name BE_MINIMAL to FIRMWARE_MINIMAL (#5106)
  • Change image names USE_xyz to FIRMWARE_xyz (#5106)
  • Change GUI weblog solving possible empty screens (#5154)
  • Change PN532 support from I2C to Serial for more stability (#5162)
  • Change template update by removing possibility to add user module config keeping template as defined (#5222)
  • Fix most compiler warnings
  • Fix IR local echo
  • Fix Display exception 28 when JSON value is NULL received
  • Fix HLW8012, HJL01 and BL0937 based energy sensors low Power (below 10W) measurement regression from 6.4.1.6
  • Fix epaper driver (#4785)
  • Fix Home Assistant Sensor Discovery Software Watchdog restart (#4831, #4988)
  • Fix allowable MAX_RULE_VARS to 16 (#4933)
  • Fix mDNS addService (#4938, #4951)
  • Fix Hass discovery of MHZ19(B) sensors (#4992)
  • Fix some exceptions and watchdogs due to lack of stack space (#5215)
  • Fix GUI wifi password acception starting with asteriks (*) (#5231, #5242)
  • Fix command WebSend intermittent results (#5273, #5304)
  • Fix additional characters in fallbacktopic, hostname and mqttclient on core 2.5.0 (#5359, #5417)
  • Fix Energy TotalStartTime when commands EnergyReset0 and/or EnergyReset3 used (#5373)
  • Fix DS18S20 temperature calculation (#5375)
  • Fix float calculations in range from 0 to -1 (#5386)
  • Fix exception on GUI Configure Logging and Configure Other (#5424)
  • Add commands PowerCal, VoltageCal and CurrentCal for HLW8012, HJL01 and BL0937 based energy sensors
  • Add Power status functionality to LED2 when configured leaving LED1 for Link status indication
  • Add support for Smanergy KA10 Smart Wall Socket with Energy monitoring
  • Add SerialBridge command SSerialSend5 <hexdata>
  • Add SetOption32 until SetOption49 diagnostic information to Status 3 report as replacement for second property value in SetOption property name
  • Add Resolution property to Status 3 report providing previous SetOption second value property
  • Add user configuration of HLW8012 and HJL-01/BL0937 Energy Monitoring as used in Sonoff S31, Pow Ra and many Tuya based devices
  • Add user configuration of MCP39F501 Energy Monitoring as used in Shelly2
  • Add property LinkCount to state and status 11 message representing number of Wifi Link re-connections
  • Add property MqttCount to status 6 message representing number of Mqtt re-connections
  • Add property Downtime to state and status 11 message representing the duration of wifi connection loss
  • Add support for commands in sensor drivers
  • Add (S)SerialSend3 escape sequence \x to allow hexadecimal byte value (#3560, #4947)
  • Add command SetOption36 to control boot loop default restoration (#4645, #5063)
  • Add define DS18B20_INTERNAL_PULLUP to select internal input pullup when only one DS18B20 sensor is connected eliminating external resistor (#4738)
  • Add variable %timestamp% to rules (#4749)
  • Add support for MAX31855 K-Type thermocouple sensor using softSPI (#4764)
  • Add button control when no relay configured (#4682)
  • Add support for Near Field Communication (NFC) controller PN532 using I2C (#4791)
  • Add command SetOption55 0/1 to disable/enable mDNS (#4793)
  • Add 4 seconds startup delay to button control (#4829)
  • Add support for OBI Power Socket 2 (#4829)
  • Add support for YTF IR Bridge (#4855)
  • Add support for Mi LED Desk Lamp with rotary switch (#4887)
  • Add support for Digoo DG-SP202 Smart Socket with Energy monitoring (#4891)
  • Add support for MAX44009 Ambient Light sensor (#4907)
  • Add split interlock (#4910)
  • Add support for inverted buttons and inverted buttons without pullup (#4914)
  • Add core version conditional compile options to provided PWM files (#4917)
  • Add support for Luminea ZX2820 Smart Socket with Energy monitoring (#4921)
  • Add define MDNS_ENABLE to control initial mDNS state (#4923)
  • Add command Interlock 0 / 1 / 1,2 3,4 .. to control interlock ON/OFF and add up to 8 relays in 1 to 4 interlock groups (#5014)
  • Add resiliency to saved Settings (#5065)
  • Add support for multiple ADS1115 I2C devices (#5083)
  • Add rule support for "==", "!=" ">=" and "<=" (#5122)
  • Add MHZ19 Temperature as Domoticz Temperature selection (#5128)
  • Add command SerialDelimiter 128 to filter reception of only characters between ASCII 32 and 127 (#5131)
  • Add Hass status sensor (#5139)
  • Add status message to former declined group commands (#5145)
  • Add support for online template change using command Template or GUI Configure Other (#5177)
  • Add parameter CFG_HOLDER to status 1 message (#5206)
  • Add rule expression enabled by define USE_EXPRESSION in my_user_config.h (#5210)
  • Add Configure Template menu option to GUI (#5222)
  • Add option WifiConfig 7 to allow reset of device in AP mode without admin password (#5297)
  • Add command SetOption62 0/1 to disable retain on Button or Swith hold messages (#5299)
  • Add command SetOption37 for RGBCW color mapping (#5326)
  • Add Korean language translations (#5344)
  • Add command Template 255 to copy module configuration over to current active template and store as user template named Merged (#5371)
  • Add 0x to IRRemote (SetOption29) and RCSwitch (SetOption28) received hexadecimal data (#5431)
  • Add support for sensor SCD30 (#5434)