IniFile example

Instructions for use

Copy the net.ini file to the root directory of your (micro)SD card.
Modify the IniFileExample.ino file so that SD_SELECT defines the correct pin number.
Compile and upload the sketch.

Expected output

It may take a few seconds from the sketch starting before anything is printed to the serial port, be patient. If the sketch runs correctly the output should appear as below:

Ini file exists
section 'network' has an entry 'mac' with value 01:23:45:67:89:AB
Could not read 'nosuchkey' from section 'network', error was key not found
Could not read 'nosuchkey' from section 'nosuchsection', error was section not found
The value of 'allow put' in section '/upload' is TRUE

If the SD card is missing or cannot be read the sketch will print:

SD.begin() failed

857 B Raw Blame History

IniFile example

Instructions for use

Expected output

857 B

Raw Blame History