Tasmota/README.md at cf350dc58444339b12d98e1f9f3efa6f46710061

arendst cf350dc584 v5.8.0o - Add VEML6070 and more light schemes

5.8.0o
 * Remove max string length of 14 for Domoticz sensor
descriptions
 * Add light scheme options (Color cycle Up, Down, Random)
and moving WS2812 schemes up by 3
 * Add support for VEML6070 I2C Ultra
Violet level sensor (#1053)

2017-10-25 14:27:30 +02:00

4.1 KiB

Raw Blame History

Sonoff-Tasmota

Provide ESP8266 based Sonoff by iTead Studio and ElectroDragon IoT Relay with Serial, Web and MQTT control allowing 'Over the Air' or OTA firmware updates using Arduino IDE.

Current version is 5.8.0o - See sonoff/_releasenotes.ino for change information.

ATTENTION All versions

Only Flash Mode DOUT is supported. Do not use Flash Mode DIO / QIO / QOUT as it might seem to brick your device.

See Wiki for background information.

ATTENTION Version 5 and up

These versions use a new linker script to free flash memory for future code additions. It moves the settings from Spiffs to Eeprom. If you compile your own firmware download the new linker to your IDE or Platformio base folder. See Wiki > Prerequisite.

Best practice to implement is:

Open the webpage to your device
Perform option Backup Configuration
Upgrade new firmware using Firmware upgrade
If configuration conversion fails keep the webpage open and perform Restore Configuration

You should now have a device with 32k more code memory to play with.

Version Information

Sonoff-Tasmota provides all (Sonoff) modules in one file and starts with module Sonoff Basic.
Once uploaded select module using the configuration webpage or the commands Modules and Module.
After reboot select config menu again or use commands GPIOs and GPIO to change GPIO with desired sensor.

See Wiki for more information.
See Community for forum and more user experience.

The following devices are supported:

License

This program is licensed under GPL-3.0