mgeppert/Tasmota
1
0
Fork 0
Code Issues Pull Requests 1 Actions Packages Projects Releases Wiki Activity
v5.8.0
Tasmota/README.md
arendst af942a278c v5.8.0 
5.8.0 20170918
 * Remove the need for NeoPixelBus library for Hue
support
 * Consolidate WS2812 into Sonoff Led for flexible future led
strip library changes
 * Invert WS2812 fade speed to align with Sonoff
led (Speed 1 = fast, Speed 8 = slow)
 * Remove upper case MQTT receive
buffer
 * Reduce code and string length for output of commands Modules
and GPIOs
 * Add Sonoff SC debug information
 * Change syslog service
 *
Removed webserver syslog disable as now no longer needed
 * Increased
default MQTT message size from 368 to 405 bytes while keeping
MQTT_MAX_PACKET_SIZE = 512 (because we can)
 * Fix MQTT Offline or
Remove MQTT retained topic code
 * Fix Domoticz loop when Emulation is
selected
 * Add blink to WS2812 and Sonoff Led (#643)
 * Add option
WIFI_WAIT (5) to command WifiConfig to allow connection retry to same AP
without restart or update flash (#772, #869)
 * Add support for Witty
Cloud (#794)
 * Add GPIO14 to Sonoff Dual (#797, #839)
 * Add support
for Yunshan Wifi Relay (#802)
 * Add GPIO16 input pulldown (#827)
 * Add
timeout to DHT and DS18B20 sensors (#852)
 * Fix watchdog timeout caused
by lack of stack space by moving to heap (#853)
 * Allow LogPort and
MqttPort up to 65535 and add LogPort tot Status 3 (#859)
 * Allow
command SwitchTopic in group mode (#861)
 * Allow command SwitchMode if
no switches are defined (#861)
 * Add optional dimmer parameter to
command Wakeup for WS2812, AiLight, Sonoff B1, Led and BN-SZ01 (#867)
 *
Fix basic On, Off, Toggle, Blink and BlinkOff commands when other
language is selected (#874)
2017-09-18 18:38:13 +02:00

62 lines
4.1 KiB
Markdown
Raw Permalink Blame History

## Sonoff-Tasmota
Provide ESP8266 based Sonoff by [iTead Studio](https://www.itead.cc/) and ElectroDragon IoT Relay with Serial, Web and MQTT control allowing 'Over the Air' or OTA firmware updates using Arduino IDE.
Current version is **5.8.0** - See [sonoff/_releasenotes.ino](https://github.com/arendst/Sonoff-Tasmota/blob/master/sonoff/_releasenotes.ino) for change information.
### ATTENTION All versions
Only Flash Mode DOUT is supported. Do not use Flash Mode DIO / QIO / QOUT as it might seem to brick your device.
See [Wiki](https://github.com/arendst/Sonoff-Tasmota/wiki/Theo's-Tasmota-Tips) for background information.
### ATTENTION Version 5 and up
These versions use a new linker script to free flash memory for future code additions. It moves the settings from Spiffs to Eeprom. If you compile your own firmware download the new linker to your IDE or Platformio base folder. See [Wiki > Prerequisite](https://github.com/arendst/Sonoff-Tasmota/wiki/Prerequisite).
Best practice to implement is:
- Open the webpage to your device
- Perform option ``Backup Configuration``
- Upgrade new firmware using ``Firmware upgrade``
- If configuration conversion fails keep the webpage open and perform ``Restore Configuration``
You should now have a device with 32k more code memory to play with.
### Version Information
- Sonoff-Tasmota provides all (Sonoff) modules in one file and starts with module Sonoff Basic.
- Once uploaded select module using the configuration webpage or the commands ```Modules``` and ```Module```.
- After reboot select config menu again or use commands ```GPIOs``` and ```GPIO``` to change GPIO with desired sensor.
<img src="https://github.com/arendst/arendst.github.io/blob/master/media/sonoffbasic.jpg" width="250" align="right" />
See [Wiki](https://github.com/arendst/Sonoff-Tasmota/wiki) for more information.<br />
See [Community](https://groups.google.com/d/forum/sonoffusers) for forum and more user experience.
The following devices are supported:
- [iTead Sonoff Basic](http://sonoff.itead.cc/en/products/sonoff/sonoff-basic)
- [iTead Sonoff RF](http://sonoff.itead.cc/en/products/sonoff/sonoff-rf)
- [iTead Sonoff SV](https://www.itead.cc/sonoff-sv.html)<img src="https://github.com/arendst/arendst.github.io/blob/master/media/sonoff_th.jpg" width="250" align="right" />
- [iTead Sonoff TH10/TH16 with temperature sensor](http://sonoff.itead.cc/en/products/sonoff/sonoff-th)
- [iTead Sonoff Dual](http://sonoff.itead.cc/en/products/sonoff/sonoff-dual)
- [iTead Sonoff Pow](http://sonoff.itead.cc/en/products/sonoff/sonoff-pow)
- [iTead Sonoff 4CH](http://sonoff.itead.cc/en/products/sonoff/sonoff-4ch)
- [iTead Sonoff 4CH Pro](http://sonoff.itead.cc/en/products/sonoff/sonoff-4ch-pro)
- [iTead S20 Smart Socket](http://sonoff.itead.cc/en/products/residential/s20-socket)
- [iTead Slampher](http://sonoff.itead.cc/en/products/residential/slampher-rf)
- [iTead Sonoff Touch](http://sonoff.itead.cc/en/products/residential/sonoff-touch)
- [iTead Sonoff T1](http://sonoff.itead.cc/en/products/residential/sonoff-t1)
- [iTead Sonoff SC](http://sonoff.itead.cc/en/products/residential/sonoff-sc)
- [iTead Sonoff Led](http://sonoff.itead.cc/en/products/appliances/sonoff-led)<img src="https://github.com/arendst/arendst.github.io/blob/master/media/sonoff4ch.jpg" height="250" align="right" />
- [iTead Sonoff BN-SZ01 Ceiling Led](http://sonoff.itead.cc/en/products/appliances/bn-sz01)
- [iTead Sonoff B1](http://sonoff.itead.cc/en/products/residential/sonoff-b1)
- [iTead Sonoff RF Bridge 433](http://sonoff.itead.cc/en/products/appliances/sonoff-rf-bridge-433)
- [iTead Sonoff Dev](https://www.itead.cc/sonoff-dev.html)
- [iTead 1 Channel Switch 5V / 12V](https://www.itead.cc/smart-home/inching-self-locking-wifi-wireless-switch.html)
- [iTead Motor Clockwise/Anticlockwise](https://www.itead.cc/smart-home/motor-reversing-wifi-wireless-switch.html)
- [Electrodragon IoT Relay Board](http://www.electrodragon.com/product/wifi-iot-relay-board-based-esp8266/)
- [AI Light or any my9291 compatible RGBW LED](http://www.ebay.com/itm/172644855726)
### License
This program is licensed under GPL-3.0
Reference in New Issue View Git Blame Copy Permalink