mgeppert/Tasmota
1
0
Fork 0
Code Issues Pull Requests 1 Actions Packages Projects Releases Wiki Activity
f4dec9df40
Tasmota/lib/TSL2561-Arduino-Library/.github/ISSUE_TEMPLATE.md
arendst 9c9a80f7b6 v5.11.0 
5.11.0 20180107
 * Minor webpage HTML optimizations (#1358)
 * Updated
German translation (#1438)
 * Change Sonoff Pow Energy MQTT data message
and consolidate Status 8 into Status 10
 * Change ADS1115 default
voltage range from +/-2V to +/-6V (#1289)
 * Change text to Active for 3
minutes (#1364)
 * Change Wemo SetBinaryState to distinguish from
GetBinaryState (#1357)
 * Change output of HTTP command to valid JSON
and Array only (#1363)
 * Removed all MQTT, JSON and Command language
defines from locale files and set fixed to English (#1473)
 * Renamed
commands Color2,3,4 to Color3,4,5
 * Fix BME280 calculation (#1051)
 *
Fix Sonoff Bridge missed learned key if learned data contains 0x55 (End
of Transmission) flag (#1095, #1294)
 * Fix PWM initialization in
Dimmer/Color mode (#1321)
 * Fix Wemo Emulation (#1357)
 * Fix display
of build date and time in non-english locale (#1465)
 * Fix Wemo and Hue
emulation by adding M-Search response delay (#1486)
 * Add libraries
Adafruit_BME680-1.0.5, Adafruit_Sensor-1.0.2.02, TasmotaSerial-1.0.0 and
TSL2561-Arduino-Library
 * Add command Color2 to set color while keeping
same dimmer value
 * Add device function pointers
 * Add support for
SenseAir S8 CO2 sensor
 * Add color led signal to Carbon Dioxide (CO2)
sensors using defines CO2_LOW and CO2_HIGH in user_config.h
 * Add
support for Domoticz Air Quality sensor to be used by MH-Z19(B) and
SenseAir sensors
 * Add support for PZEM004T energy sensor
 * Add
support for iTead SI7021 temperature and humidity sensor by
consolidating DHT22 into AM2301 and using former DHT22 as SI7021 (#735)

* Add support for BME680 using adafruit libraries (#1212)
 * Add support
for MH-Z19(B) CO2 sensor (#561, #1248)
 * Add multipress support and
more user configurable GPIO to Sonoff Dual R2 (#1291)
 * Add support for
TSL2561 using adafruit library (#661, #1311)
 * Add support for SHT3x
(#1314)
 * Add support for Arilux LC06 (#1414)
 * Add Italian language
file (#1449)
 * Add 2nd Gen Alexa support to Wemo emulation discovery
(#1357, #1450)
 * Add define for additional number of WS2812 schemes
(#1463)
2018-01-07 14:40:37 +01:00

2.6 KiB
Raw Blame History

Thank you for opening an issue on an Adafruit Arduino library repository. To improve the speed of resolution please review the following guidelines and common troubleshooting steps below before creating the issue:

  • Do not use GitHub issues for troubleshooting projects and issues. Instead use the forums at http://forums.adafruit.com to ask questions and troubleshoot why something isn't working as expected. In many cases the problem is a common issue that you will more quickly receive help from the forum community. GitHub issues are meant for known defects in the code. If you don't know if there is a defect in the code then start with troubleshooting on the forum first.

  • If following a tutorial or guide be sure you didn't miss a step. Carefully check all of the steps and commands to run have been followed. Consult the forum if you're unsure or have questions about steps in a guide/tutorial.

  • For Arduino projects check these very common issues to ensure they don't apply:

    • For uploading sketches or communicating with the board make sure you're using a USB data cable and not a USB charge-only cable. It is sometimes very hard to tell the difference between a data and charge cable! Try using the cable with other devices or swapping to another cable to confirm it is not the problem.

    • Be sure you are supplying adequate power to the board. Check the specs of your board and plug in an external power supply. In many cases just plugging a board into your computer is not enough to power it and other peripherals.

    • Double check all soldering joints and connections. Flakey connections cause many mysterious problems. See the guide to excellent soldering for examples of good solder joints.

    • Ensure you are using an official Arduino or Adafruit board. We can't guarantee a clone board will have the same functionality and work as expected with this code and don't support them.

If you're sure this issue is a defect in the code and checked the steps above please fill in the following fields to provide enough troubleshooting information. You may delete the guideline and text above to just leave the following details:

  • Arduino board: INSERT ARDUINO BOARD NAME/TYPE HERE

  • Arduino IDE version (found in Arduino -> About Arduino menu): INSERT ARDUINO VERSION HERE

  • List the steps to reproduce the problem below (if possible attach a sketch or copy the sketch code in too): LIST REPRO STEPS BELOW