9c9a80f7b6
5.11.0 20180107 * Minor webpage HTML optimizations (#1358) * Updated German translation (#1438) * Change Sonoff Pow Energy MQTT data message and consolidate Status 8 into Status 10 * Change ADS1115 default voltage range from +/-2V to +/-6V (#1289) * Change text to Active for 3 minutes (#1364) * Change Wemo SetBinaryState to distinguish from GetBinaryState (#1357) * Change output of HTTP command to valid JSON and Array only (#1363) * Removed all MQTT, JSON and Command language defines from locale files and set fixed to English (#1473) * Renamed commands Color2,3,4 to Color3,4,5 * Fix BME280 calculation (#1051) * Fix Sonoff Bridge missed learned key if learned data contains 0x55 (End of Transmission) flag (#1095, #1294) * Fix PWM initialization in Dimmer/Color mode (#1321) * Fix Wemo Emulation (#1357) * Fix display of build date and time in non-english locale (#1465) * Fix Wemo and Hue emulation by adding M-Search response delay (#1486) * Add libraries Adafruit_BME680-1.0.5, Adafruit_Sensor-1.0.2.02, TasmotaSerial-1.0.0 and TSL2561-Arduino-Library * Add command Color2 to set color while keeping same dimmer value * Add device function pointers * Add support for SenseAir S8 CO2 sensor * Add color led signal to Carbon Dioxide (CO2) sensors using defines CO2_LOW and CO2_HIGH in user_config.h * Add support for Domoticz Air Quality sensor to be used by MH-Z19(B) and SenseAir sensors * Add support for PZEM004T energy sensor * Add support for iTead SI7021 temperature and humidity sensor by consolidating DHT22 into AM2301 and using former DHT22 as SI7021 (#735) * Add support for BME680 using adafruit libraries (#1212) * Add support for MH-Z19(B) CO2 sensor (#561, #1248) * Add multipress support and more user configurable GPIO to Sonoff Dual R2 (#1291) * Add support for TSL2561 using adafruit library (#661, #1311) * Add support for SHT3x (#1314) * Add support for Arilux LC06 (#1414) * Add Italian language file (#1449) * Add 2nd Gen Alexa support to Wemo emulation discovery (#1357, #1450) * Add define for additional number of WS2812 schemes (#1463)
47 lines
2.6 KiB
Markdown
47 lines
2.6 KiB
Markdown
Thank you for opening an issue on an Adafruit Arduino library repository. To
|
|
improve the speed of resolution please review the following guidelines and
|
|
common troubleshooting steps below before creating the issue:
|
|
|
|
- **Do not use GitHub issues for troubleshooting projects and issues.** Instead use
|
|
the forums at http://forums.adafruit.com to ask questions and troubleshoot why
|
|
something isn't working as expected. In many cases the problem is a common issue
|
|
that you will more quickly receive help from the forum community. GitHub issues
|
|
are meant for known defects in the code. If you don't know if there is a defect
|
|
in the code then start with troubleshooting on the forum first.
|
|
|
|
- **If following a tutorial or guide be sure you didn't miss a step.** Carefully
|
|
check all of the steps and commands to run have been followed. Consult the
|
|
forum if you're unsure or have questions about steps in a guide/tutorial.
|
|
|
|
- **For Arduino projects check these very common issues to ensure they don't apply**:
|
|
|
|
- For uploading sketches or communicating with the board make sure you're using
|
|
a **USB data cable** and **not** a **USB charge-only cable**. It is sometimes
|
|
very hard to tell the difference between a data and charge cable! Try using the
|
|
cable with other devices or swapping to another cable to confirm it is not
|
|
the problem.
|
|
|
|
- **Be sure you are supplying adequate power to the board.** Check the specs of
|
|
your board and plug in an external power supply. In many cases just
|
|
plugging a board into your computer is not enough to power it and other
|
|
peripherals.
|
|
|
|
- **Double check all soldering joints and connections.** Flakey connections
|
|
cause many mysterious problems. See the [guide to excellent soldering](https://learn.adafruit.com/adafruit-guide-excellent-soldering/tools) for examples of good solder joints.
|
|
|
|
- **Ensure you are using an official Arduino or Adafruit board.** We can't
|
|
guarantee a clone board will have the same functionality and work as expected
|
|
with this code and don't support them.
|
|
|
|
If you're sure this issue is a defect in the code and checked the steps above
|
|
please fill in the following fields to provide enough troubleshooting information.
|
|
You may delete the guideline and text above to just leave the following details:
|
|
|
|
- Arduino board: **INSERT ARDUINO BOARD NAME/TYPE HERE**
|
|
|
|
- Arduino IDE version (found in Arduino -> About Arduino menu): **INSERT ARDUINO
|
|
VERSION HERE**
|
|
|
|
- List the steps to reproduce the problem below (if possible attach a sketch or
|
|
copy the sketch code in too): **LIST REPRO STEPS BELOW**
|